Neutral Posture Ulius Synchro User manual

Ulius™
Synchro
1. Adjustable Lumbar
7. Arm Height
9. Arm Pad Position
8. Arm Pad Rotation
5. Tilt Lock
2. Seat Slider (Depth)
6. Arm Width
3. Tilt Tension
4. Seat Height

Ulius™— Synchro
1. ADJUSTABLE LUMBARSlowly slide the adjustable lumbar up or
down until you have the appropriate lumbar support.
2. SEAT SLIDER DEPTHWith your back against the backrest, press
the button to disengage the lock and slide the seat to your
desired position. Release the button to lock the seat in place.
3. TILT TENSIONTurn the knob to the right to increase tension or
turn the knob to the left to decrease tension. The knob will
click into position.
4. SEAT HEIGHTLift the lever and lift your weight to raise the seat
to the desired position. To lower the seat, lift the lever while
remaining seated.
5. TILT LOCKTo lock tilt position, recline in seat until at desired
angle and then turn the knob to the right to lock. To unlock,
turn the knob to the left.
6. ARM WIDTHPush lever down to release the arm and slide the
arm to the proper position. Lift lever to lock arm into place.
7. ARM HEIGHTPress button to adjust height until your arms are
properly supported.
8. ARM PAD ROTATIONRotate arm pad in either direction until in it
is in a comfortable position.
9. ARM PAD POSITIONSlide arm pad forward or backward until it is
in a comfortable position.
Visit NeutralPosture.com or call 979.778.0502
© 2018 Neutral Posture, Inc. All rights reserved.