Nevir NVR-123 User manual

R
F M/ AM 2 B an d R ec ei ve r
Wi th A la rm C lo ck
P21 2013-6-24客户地址更新，更改电话号码

2

1 2
3
5
4
6
8
9
10
7
11
12
13
14
15
3

1
2
3
45678
4

5

AM
(1)
FM
(2)
6

7

8

1 2
3
5
4
6
8
9
10
7
11
12
13
14
15
9

1
2
3
45678
10

11

AM
(1)
FM
(2)
12

13

FM/AM DIGITAL DISPLAY RADIO
WITH CLOCK
INSTALL BATTERY
PRECAUTIONS
1.Avoid fierce lash, or falling into the ground.
2.Do not put the radio in the place where is under
sunshine, hot or humid.
3.Keep magnetic tape, magnetic card and other
magnetic record software away from the speaker,
in order to avoid that the record is erased or there
is noise in the magnetic tape.
4.If there are sundry matters in the radio, please use
the radio after checking by qualified technician.
5.Each index of the radio is adjusted well, so please
do not adjust the components in the radio.
6.Use a soft cloth with detergent to clean the cabinet.
Please do not use alcohol, thinner and other strong
detergent to clean it.
Installing batteries
1. The radio uses two AAA
1.5V batteries, please
put the new batteries in
the battery slot according
To the polarity.
2. If the sound is distortion Or the volume is faint,
please change the batteries in time.
When you use the digital display radio
of the radio, please use high quality and high energy
battery or alkaline battery.
1. Do not use new and old or different type batteries
together.
2. In order to prevent the leakage of the electrolysis
liquid or danger of explosion, do not charge, heat
or resolve the batteries.
Suggestion:
Attention:
14

APPEARANCE DIAGRAM &
FUNCTION INDICATION
1. Time switch on function switch button
2. Minute adjustment button
3. Tuner
4. Hour adjustment button
5. Power switch off button
6. Volume control
7. Display screen
8. Time switch on time set button
9. Time set/time display button
10. FM band & switch on button
11. AM band & switch on button
12. Telescopic antenna
13. Belt fastener
14. Earphone socket
15. Battery slot
1 2
3
5
4
6
8
9
10
7
11
12
13
14
15
3. If you do not use the radio for a long time, please
take out the batteries, lest the leakage of the
battery corrodes the parts in the radio.
4. If the battery leaks, you must change the battery
after cleaning the battery slot by a soft cloth.
15

LCD EXPLANATION
1. FM frequency unit indication
2. AM frequency unit indication
3. Frequency or time indication
4. Time switch on function indication
5. Time switch on time indication
6. P.M. time indication
7. FM band indication
8. AM band or A.M. time indication
RECEPTION OPERATION
1. Press FM band & switch on button (10) to turn on
the radio, and receive FM band program.
2. Press AM band & switch on button (11) to turn on
the radio, and receive AM band program.
3. Turn the Volume control (6) to adjust to the
optimum volume.
4. Turn the Tuner (3) to watch the station frequency
on the display, you can search your desired station
program.
5. In order not to affect others, you can use earphone
to listen to the radio. Plug the earphone into the
Earphone socket (14) (the speaker inside the radio
disconnects automatically), and you can appreciate
Hi-fi station program.
6. When you do not want to listen to the radio, please
press the Power switch off button (5) to turn off the
power.
7. The belt fastener is set for the radio, it is
convenient for you to carry the radio.
1
2
3
45678
16

TIMING SETTING
CLOCK SETTING
After completing time set exactly, you can set the
switch on time:
1. In the state of clock, keep
the Time switch on time
set button(8)pressed, the
"AL/SET" appears on the display screen.
2. Respectively press the Hour adjustment button
(4)to adjust hour, press the Minute adjustment
button (2) to adjust minute, you can adjust your
desired switch on time.
Press the timing switch on time set button to display
the switch on time.
When setting the timing
switch on time
When checking the switch on time
Attention: When setting the timing switch on time, AM on the
display screen means morning time, PM means afternoon time.
After installing batteries, in the state of clock, the
appears on the LCD.
1. In the state of turning off the
radio, keep the Time set
button(9) pressed,
2. Meanwhile press the Hour
adjustment button(4)to adjust hour, or meanwhile
press the Minute adjustment button(2) to adjust
minute, it sets clock time.
Reset from the beginning
Press Time set/Time display button (9) when
receiving, the time will appear on the display screen.
12:00
When setting the clock time
When calibrating the time
When checking the time
Attention: The 12 hours system is used in the radio. AM on
the display screen means morning time, PM means afternoon
time.
17

TIMING FUNCTION
USE ANTENNA
After the switch on time is set, keep the radio in the
state of clock.
1. Press the Time switch on
function switch button(1)once,
the symbol of " " displays
on the display screen, the
timing switch on function
begins to work.
2. When the timing switch on time reaches, the radio
will automate to be turned on, and receive FM
band program.
Press the Time switch on function switch button (1)
to cancel the symbol of " ", press the Power
switch off button (5) to turn off the radio.
When setting the timing switch on function
When turning off the radio
1. Receiving AM by using the
internal magnetic antenna,
and you can get the best
reception by rotating the
direction of the radio.
(Figure1)
2. When you receive FM station,
please pull out the telescopic
antenna to get the best
receptionby changing its
length and angle. (Figure 2)
AM
(1)
FM
(2)
18

1. Frequency Range
FM 87.5-108 MHz
AM 526-1606 KHz
2. Sensitivity
FM 20 V
AM 5mV/m
3. Single-signal Selectivity
10dB
≤
≤
TECHNICAL INDEX
4. Power: DC 3V
Battery two AAA1.5V batteries
5. Speaker: 40mm/8 /0.5W
6. Earphone: 3.5mm32
7. Unit Size: 90 53 20mm
8. Weight: 80g (without battery)
Φ Ω
Φ Ω
x x
≤
1. The AM and SW are strongly jammed by the TV set,
fluorescent lamp, silicon con-trolled table lamp,
computer and motor and so on. When you use the
radio, please keep the radio away from the above-
mentioned electrical equipment.
2. Reinforcing bar structure inside the multistoried
building and high building will screen the broadcast
signal, receiving near the window will improve
reception effect.
3. The SW and FM broadcast will be strongly jammed by
the nearby "BB" station signal,you can improve
reception effect by adjusting the length of the antenna
and the angle of the radio.
4. The digit display radio is affected by the temperature,
humidity and vibration and son on, the digit frequency
will maybe deviate. So in using time turn on function,
if the frequency deviates, please adjust to receive the
correct station.
5. When the temperature is under -10 in winter, it will
cause the leakage of LCD, in general, please avoid
using the radio under low temperature.
℃
19
This symbol indicates that when the end-user wishes to
discard this product, it must be sent to separate collection
facilities for recovery and recycling. By separating this
product from other household-type waste, the volume of
waste sent to incinerators or land-fills will be reduced and
natural resources will thus be conserved.

20
Nevir S.A.
C/ Canteros 14
Parque Empresarial Puerta de Madrid
28830 San Fernando de Henares Madrid- Spain