New Age HOME BAR Series User manual

HOME BAR SERIES
63” Shelf
2 Door Cabinet
CABINETS
SHELVING
COUNTERTOPS
3 Drawer CabinetDisplay Cabinet
Double Display CabinetWall Wine Rack
Split
Short Wall
Wine Storage Cabinet
Tall Wall
42” Shelves
84” Countertop 63” Countertop 42” Countertop

HOME BAR SERIES
21in. 2 DOOR CABINET
!
STOP ATTENTION:Is your cabinet damaged?
Need help or spare parts? For fastest service,
contact NewAge Products at 1-877-306-8930;
or [e-mail].
Do not return to the retailer.
Use two or more people to move, assemble, or
install cabinets to avoid back injury. Do not leave
children unattended near cabinets. High risk
of tipping if cabinets are installed incorrectly:
securely attach cabinets to the wall to avoid
serious injury.
For assistance, call 1.877.306.8930; for U.K
0800.031.4069: e-mail at info@newageproducts.
com.
Warning: Excessive weight
hazard!

42” Countertop. Fits over 2 Cabinets
63” Countertop. Fits over 3 Cabinet
84” Countertop. Covers over 4 Cabinet
CountertopsWeight
Capacity
25lbs.
205lbs.
220lbs.
Bottle Display
Base Cabinet
Max 500lbs.

Handles
Shelf Pins
Adjustable Shelf
Handle Bolts (M4 x 22mm)
2
4
8
1
2 Door Cabinet
Cabinet
#8 x 25mm Screws 6
Parts Supplied
Unpacking
• Begin by placing the package on a covered at surface.
• Remove all cardboard, foam packaging material and clear plastic bags.
• Dispose / recycle all packaging materials.
• Verify all the contents in the box and gather the required tools. See “Parts”and “Tools Needed” in the list below.
Handle Display Racks Shelf Pins
Tools Needed
1 x Tape Measure
1 x #2 Phillips Bit
(opitional)
1 x Pencil
1 x Cordless Power Drill
(optional)
1 x #2 Phillips head
screwdriver
1 x Flashlight
(optional)
1 x Drill Bit
2.5mm or 3/32”
Screws
#8 x 25mm
Handle Bolt
M4 x 22mm

Installing the Handles
Parts Needed. Align handle to holes
on doors or drawers.
Screw in bolts.
12
3
2 x Handles
Note:
Cabinets come with handles installed on
inside of drawers/doors.
4 x Handle Bolt
M4 x 22mm

Fastening Cabinets Note:
All shelves must be removed prior to
fastening cabinets together.
Using pilot hole as guides, screw into second cabinet.
Do not over-tighten screws and punch through other side!
X4
Drill 3/32” pilot holes on interior wall of cabinet being
fastened.
Parts Needed.
45
6
4- #8 x25mm
screws

Inserting Cabinets Shelves on an angle
Lower shelf down
onto shelf supports.
Insert rack at a slight angle and position
over shelf supports. Rotate shelf so it is level.
Rest shelf on shelf supports
Open cabinet doors. Attach
shelf clips to desired height. Make sure shelf supports are located
at the same height.
Insert remaining shelves.
4
11 12
13 14
15 16

HOME BAR SERIES
21in. DISPLAY CABINET
!
STOP ATTENTION:Is your cabinet damaged?
Need help or spare parts? For fastest service,
contact NewAge Products at 1-877-306-8930;
or suppor[email protected].
Do not return to the retailer.
Use two or more people to move, assemble, or
install cabinets to avoid back injury. Do not leave
children unattended near cabinets. High risk
of tipping if cabinets are installed incorrectly:
securely attach cabinets to the wall to avoid
serious injury.
For assistance, call 1.877.306.8930; for U.K
0800.031.4069: e-mail at info@newageproducts.
com.
Warning: Excessive weight
hazard!

42” Countertop. Fits over 2 Cabinets
63” Countertop. Fits over 3 Cabinet
84” Countertop. Covers over 4 Cabinet
CountertopsWeight
Capacity
25lbs.
25lbs.
25lbs.
205lbs.
220lbs.
Bottle Display
Base Cabinet
Max 500lbs.

Handles
Shelf Pins
Adjustable Display Racks
Handle Bolts (M4 x 22mm)
2
4
14
3
Bottle Display
Cabinet
#8 x 25mm Screws 6
Parts Supplied
Unpacking
• Begin by placing the package on a covered at surface.
• Remove all cardboard, foam packaging material and clear plastic bags.
• Dispose / recycle all packaging materials.
• Verify all the contents in the box and gather the required tools. See “Parts”and “Tools Needed” in the list below.
Handle Display Racks Shelf Pins
Tools Needed
1 x Tape Measure
1 x #2 Phillips Bit
(opitional)
1 x Pencil
1 x Cordless Power Drill
(optional)
1 x #2 Phillips head
screwdriver
1 x Flashlight
(optional)
1 x Drill Bit
2.5mm or 3/32”
Screws
#8 x 25mm
Handle Bolt
M4 x 22mm

Installing the Handles
Parts Needed. Align handle to holes
on doors or drawers.
Screw in bolts.
12
3
2 x Handles
Note:
Cabinets come with handles installed on
inside of drawers/doors.
4 x Handle Bolt
M4 x 22mm

Fastening Cabinets Note:
All shelves must be removed prior to
fastening cabinets together.
Using pilot hole as guides, screw into second cabinet.
Do not over-tighten screws and punch through other side!
X4
Drill 3/32” pilot holes on interior wall of cabinet being
fastened.
Parts Needed.
45
6
4- #8 x25mm
screws

Inserting Cabinets Shelves on an angle
Lower shelf down
onto shelf supports.
Insert rack at a slight angle and position
over shelf supports.
Ensure shelf supports sits in groove
on lower edge of rack.
Open cabinet doors. Attach
shelf clips to desired height. The shelf supports are inserted into
front and middle hole positions.
Insert remaining shelves.
4
11 12
13 14
15 16

Inserting Cabinets Shelves Horizontal
Lower shelf down onto shelf supports.
Open cabinet doors. Attach
shelf clips to desired height. The shelf supports are inserted
into front and back holes.
Lower shelf down
onto shelf supports.
Insert rack at a slight angle and position
over shelf supports.
Insert remaining shelves.
17 18
19 20
21 22

HOME BAR SERIES
42in. DISPLAY CABINET
!
STOP ATTENTION:Is your cabinet damaged?
Need help or spare parts? For fastest service,
contact NewAge Products at 1-877-306-8930;
or suppor[email protected].
Do not return to the retailer.
Use two or more people to move, assemble, or
install cabinets to avoid back injury. Do not leave
children unattended near cabinets. High risk
of tipping if cabinets are installed incorrectly:
securely attach cabinets to the wall to avoid
serious injury.
For assistance, call 1.877.306.8930; for U.K
0800.031.4069: e-mail at info@newageproducts.
com.
Warning: Excessive weight
hazard!

42” Countertop. Fits over 2 Cabinets
63” Countertop. Fits over 3 Cabinet
84” Countertop. Covers over 4 Cabinet
CountertopsWeight
Capacity
Bottle Display
Base Cabinet
Max 500lbs.
25lbs.
25lbs.
25lbs.
205lbs.
220lbs.
25lbs.
25lbs.
25lbs.
205lbs.
220lbs.

Handles
Shelf Pins
Adjustable Display Racks
Handle Bolts (M4 x 22mm)
2
4
28
6
Bottle Double
Display Cabinet
#8 x 25mm Screws 12
Parts Supplied
Unpacking
• Begin by placing the package on a covered at surface.
• Remove all cardboard, foam packaging material and clear plastic bags.
• Dispose / recycle all packaging materials.
• Verify all the contents in the box and gather the required tools. See “Parts”and “Tools Needed” in the list below.
Handle Display Racks Shelf Pins
Tools Needed
1 x Tape Measure
1 x #2 Phillips Bit
(opitional)
1 x Pencil
1 x Cordless Power Drill
(optional)
1 x #2 Phillips head
screwdriver
1 x Flashlight
(optional)
1 x Drill Bit
2.5mm or 3/32”
Screws
#8 x 25mm
Handle Bolt
M4 x 22mm

Installing the Handles
Parts Needed. Align handle to holes
on doors or drawers.
Screw in bolts.
12
3
4 x Handles
Note:
Cabinets come with handles installed on
inside of drawers/doors.
8 x Handle Bolt
M4 x 22mm

Fastening Cabinets Note:
All shelves must be removed prior to
fastening cabinets together.
Using pilot hole as guides, screw into second cabinet.
Do not over-tighten screws and punch through other side!
X4
Drill 3/32” pilot holes on interior wall of cabinet being
fastened.
Parts Needed.
45
6
4- #8 x25mm
screws

Mounting the Worktop
Drill 3/32” pilot holes on interior
roof of cabinet. Tighten screws to secure cabinets.
3
Place worktop over cabinets and lower onto cabinets.
8
Parts
Needed.
7
910
3
4- #8 x25mm
screws