New Age Monterey User manual

1
Monterey - Sofa
Stainless Steel-Teak / Aluminium-Teak / Aluminium
INSTALLATION GUIDE
ATTENTION:Is your Sofa damaged?
Need help or spare parts? For fastest service,
contact NewAge Products at 1-877-306-8930;
or [e-mail].
Do not return to the retailer.
IM-ODF.21A-01
STOP

2
Index
Unpacking 3
Product Inspection 3
Tools Needed 3
Monterey-Sofa Collection 4
Hardware 4
Component for SKU Packages 5
Layout Examples 7
Single Seater Assembly 8
Multi Seater Assembly 12
Corner Assembly 19
Corner Set Assembly 23
Spare Parts - Single Seater 26
Spare Parts - Multi Seater 28
Cleaning and Care 32
NEWAGE PRODUCTS INC. OUTDOOR FURNITURE MANUFACTURER WARRANTY 33

3
Unpacking
Tools Needed
• Begin by placing the package on a covered at surface.
• Remove all cardboard, foam packaging material and nylon bags.
• Dispose / recycle all packaging materials.
• Verify all the contents in the box and gather the required tools. See“Tools Needed”in the list below.
Product Inspection
• Check to see all parts are received as per the
order placed.
• Contact NewAge Products at 1-877-306-8930;
for any missing parts.
• Inspect the products for any damages before
starting the installation.
• Go through the installation instructions carefully
before starting the installation.
Wrench
(10mm)
Allen key
(4mm and 5mm)

4
Hardware
Monterey-Sofa Collection
Sofa Seat Assembly
Stainless Steel - Teak Sofa Aluminium - Teak Sofa Aluminium Sofa
Arm Rest Assembly
Back Rest Assembly
Bolt
M6X60
Bolt
M8X60
Hex Lock Nut
M6
Bolt
M6X25
Bolt
M6X20
(Corner Leg post)
Washer
M8x2
Washer
M8x2
Washer
M8x2
Dowel Pin
50mm
Plastic Cap
M8
Bolt
M8X60

5
Component for SKU Packages
Seat Base Pack
Backrest Pack
Stainless Steel -Aluminium
Stainless Steel -Aluminium
Teak
Aluminium
Aluminium
Aluminium
Item
No. Description Quantity
1Seat Base (Stainless
Steel-Aluminium) 1
2Washer (M8x2) 4
3M6x25 Bolt 4
4M6x60 Bolt 6
5Plastic Cap (8mm) 4
6M6 Hex Lock Nut 2
Item
No. Description Quantity
1
Corner Seat Base
(Stainless Steel-
Aluminium)
1
2Washer (M8x2) 8
3M6x20 Bolt 2
4M6x60 Bolt 6
5Plastic Cap (8mm) 4
6Corner Leg Post 1
7M6 Hex Lock Nut 2
Item
No. Description Quantity
1Corner Seat Base
(Aluminium) 1
2Washer (M8x2) 8
3M6x20 Bolt 2
4M6x60 Bolt 6
5Plastic Cap (8mm) 4
6Corner Leg Post 1
7M6 Hex Lock Nut 2
Item
No. Description Quantity
1Backrest (Teak) 1
2Washer (M8x2) 2
3M8x60 Bolt 2
450mm Dowell Pin 1
Item
No. Description Quantity
1Backrest (Aluminium) 1
2Washer (M8x2) 2
3M8x60 Bolt 2
450mm Dowell Pin 1
Item
No. Description Quantity
1Seat Base (Aluminium) 1
2Washer (M8x2) 4
3M6x25 Bolt 4
4M6x60 Bolt 6
5Plastic Cap (8mm) 4
6M6 Hex Lock Nut 2
Corner SeatBase with
corner leg

6
Armrest Pack
(Pack of 2)
Leg Pack
Teak
Teak
Stainless Steel
pack of 2 pack of 2
pack of 3 pack of 3
Aluminium
Aluminium
Aluminium
Corner Backrest Pack
Component for SKU Packages
Item
No. Description Quantity
1Corner Backrest (Teak) 1
2Washer (M8x2) 3
3M8x60 Bolt 3
Item
No. Description Quantity
1Armrest (Teak) 2
2Washer (M8x2) 6
3M8x60 Bolt 6
Item
No. Description Quantity
1Stainless Steel Leg 2
Item
No. Description Quantity
1Aluminium Leg 2
Item
No. Description Quantity
1Aluminium Leg 3
Item
No. Description Quantity
1Stainless Steel Leg 3
Item
No. Description Quantity
1Corner Backrest
(Aluminium) 1
2Washer (M8x2) 3
3M8x60 Bolt 3
Item
No. Description Quantity
1Armrest(Aluminium) 2
2Washer (M8x2) 6
3M8x60 Bolt 6

7
Layout Examples
Corner Layout
Linear LayoutSingle Seater

8
Single Seater Assembly
Place the seatbase assembly on top of the two legs and tighten one M6x60 and one M6x25
bolt at each corner of the leg assembly as shown(A) to x legs by using an allen key.
1
A

9
Attach the backrest to the assembly using two M8x60mm bolts as shown (A) with an allen key.
Add the M8 washers to the bolts.
2
Single Seater Assembly
A

10
Attach side armrests to the assembly using three M8x60mm bolts on each side.
Add the M8 washer for all the bolts. Use an allan key to tighten the bolts as shown(A)
3
Single Seater Assembly
Right SideLeft Side
A

11
Place seat cushion, back cushion and throw pillow(Optional) on the sofa assembly.
4
Single Seater Assembly
Item
No. Description Quantity
Required
1Seat Base Assembly 1
2Backrest Assembly 1
3Armrest Assembly 1x Pack of 2
4Leg Assembly 1x Pack of 2
5Seat Cushion 1
6Back Cushion 1
7Accent Cushion (Optional) 1

12
Multi Seater Assembly
Place the seat base assembly like the single seater on top of the left leg. Assemble the left leg
by adding two M6x60 bolts and two M6x25 bolts(A).
Now place the right leg on the outer holes of the seat base by adding two M6x60 bolts as
shown in the illustrations.
Add the plastic cap on top of the unused holes of the seat base(B).
1
B
A

13
Multi Seater Assembly
Now add a seatbase to the shared leg and tighten two M6x60 bolts(A).
Then attach the last leg to the right side of the assembly by adding two M6x60 bolts and two
M6x25 bolts each with an allen key(B).
2
B
A

14
Add two M6x60 bolts to join the two seat basis and secure it with a M8 washer and M6 hex
lock nut shown(A)
3
A
Multi Seater Assembly

15
Attach the rst backrest with two M8x60 bolts and M8 washers with an allen key(A).
4
Multi Seater Assembly
A

16
Multi Seater Assembly
Insert the 50mm Dowell Pin(A) into the rst backrest and slide the second backrest from the
side and add two M8x60 bolts and M8 washers with an allen key(B).
5
A
B

17
Now attach the two armrests to the assembly using three M8x60mm bolts with M8 washers on
each side as shown in the illustrations using an allen key(A).
6
Multi Seater Assembly
A

18
Place the seat cushions, back cushions and throw pillows(Optional) on the sofa assembly.
Similarly by adding another seatbase and backrest with two shared legs, a three seater can be
installed.
7
i
Multi Seater Assembly
Item
No. Description Quantity
Required
1Seat Base Assembly 2
2Backrest Assembly 2
3Armrest Assembly 1x Pack of 2
4Leg Assembly 1x Pack of 3
5Seat Cushion 2
6Back Cushion 2
7Accent Cushion (Optional) 2
Item
No. Description Quantity
Required
1Seat Base Assembly 3
2Backrest Assembly 3
3Armrest Assembly 1x Pack of 2
4Leg Assembly 2x Pack of 2
5Seat Cushion 3
6Back Cushion 3
7Accent Cushion (Optional) 3

19
Corner Assembly
Place the corner seatbase on top of the two legs and tighten four M6x60mm bolts to x legs
by using an allen key as shown in the image. Ensure the location of the tightening the bolts as
shown(A)
NOTE : Ensure both the legs on
the corner seatbase should be
installed as shared legs
1
i
A
B

20
Flip the assembly and install the corner leg using two M6x20mm bolts(A) with an allen key.
Attach side arms to the assembly using ve M8x60mm bolts and M8 washers as shown in the
image below. Tighten the bolts with an allen key(A).
NOTE: For the corner assembly the regular backrest is used with a corner armrest to the left
which is only for the corner sofa assembly.
2
3
Corner Assembly
i
A
A