Vivo DESK-E144B User manual

Black Electric Desk
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/desk-e144b
SKU: DESK-E144B
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
If you do not understand these directions, or if you have any doubts about the safety of the installation,
please call a qualified technician. Check carefully to make sure there are no missing or defective parts.
Improper installation may cause damage or serious injury. Do not use this product for any purpose that is
not explicitly specified in this manual and do not exceed weight capacity. We cannot be liable for damage
or injury caused by improper mounting, incorrect assembly, or inappropriate use.
176lbs
(80kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
WARNING!
PACKAGE CONTENTS
A (x4)
M8x47
B x6)
M6x10
C(x8)
M6x35
D(x24)
M5x16
E(x6)
M4x15
F(x4)
2mm, 4mm, 5mm
Allen Wrench
G (x2)
Cable Clip
H x4)
Foot Pad
1(x1)
Control Panel
2(x1)
Ac Adapter
3(x1)
Cable Tray
ELECTRICAL SAFETY INSTRUCTIONS
THIS PRODUCT IS POWERED BY ELECTRICITY. IN ORDER TO AVOID BURNS, FIRE AND ELECTRIC
SHOCK, PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY.
• DO NOT CLEAN PRODUCT WHILE POWER IS CONNECTED.
• DO NOT DISASSEMBLE OR REPLACE COMPONENTS WHILE POWER IS CONNECTED.
• NEVER OPERATE THE SYSTEM WITH A DAMAGED CORD OR PLUG. PLEASE CONTACT YOUR
SELLER TO REPLACE DAMAGED PARTS.
• NEVER OPERATE SYSTEM IN DAMP ENVIRONMENTS OR IF ANY ELECTRICAL COMPONENTS HAVE
MADE CONTACT WITH LIQUIDS.
• ALTERATIONS OF THE GIVEN POWER UNIT ARE NOT ALLOWED.
• OUTDOOR USE IS PROHIBITED.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
4 (x2)
Feet
5 x2)
Side Bracket
6(x1)
Crossbar
7(x1)
Sync Rod
8(x1)
Leg with Motor
9 (x1)
Leg
10 x3)
Connector
11 (x2)
Desktop
TOOLS NEEDED
Phillips
Screwdriver
Drill
Level
I x12)
Anti-vibration
Pads

3
ASSEMBLY STEPS
STEP 1
Assemble the crossbar (6) to the legs (8, 9) using M8x47
bolts (A) and tighten with the 5mm Allen wrench (F).
A
S=5mm
M8×47 (x4)

4
STEP 2
STEP 3
Place the feet (4) on the legs as shown, then insert and tighten M6x35 bolts (C) using the 4mm Allen
wrench (F). Screw the foot pads (H) into the feet.
Assemble the side brackets (5) to the legs using M6x10 bolts (B) and tighten with the 4mm Allen
wrench (F). Insert the anti-vibration pads (I) into the desktop mounting holes in the crossbar and side
brackets.
M6×35 (x8)
C
H
S=4mm
M6×10 (x4)
BS=4mm
I

5
STEP 4
STEP 5
Insert the sync rod (7) into the leg (9). Loosen the knob on the sync rod, then extend the rod onto the
motor leg (8) and tighten the knob. Tighten the set screw on the end of the sync rod using the 2mm
Allen wrench (F).
Assemble the desktop halves (11) using the connectors (10) with M5x16 screws (D) and a Phillips
screwdriver.
5×16 (x12)
D
S=2mm

6
STEP 6
STEP 7
Hang the cable tray (3) over the crossbar (6), opposite from the sync rod (7), then carefully place the
assembled frame upside down on the desktop (11). Secure the frame to the desktop using M5x16
screws (D) and a Phillips screwdriver.
Mount the control panel (1) to the desktop (11) using M4x15 screws (E) with a
Phillips screwdriver. Connect the AC adapter (2) and motor to the control panel.
Organize cables using the cable clips (G).
4×15 (x4)
E
G
5×16 (x10)
D

7
STEP 8
CAUTION!
Failure to follow these instructions may result in property damage and/or personal injury.
Do not exceed desk
weight limit.
Keep area of vertical
motion free of
obstacles.
Keep weight on desk
balanced for correct
operation and longer
life of components.
Leave enough slack in
cables to allow for full
range of vertical motion.
Carefully turn the desk right side up and connect the AC adapter (2) to a wall outlet. If necessary, adjust
foot pads (H) to level the desk. The desk is now ready for use. Please refer to the Controller User Guide
for operating instructions.

LAST UPDATED: 09/08/2020
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303