New Classic Home Furnishings D1701-548 User manual

Thank you for purchasing this quality product. Be sure to check all packing materials carefully for small parts,
which may have come loose inside the carton during shipment. Identify and count all items and compare with
the PARTS LIST and/or HARDWARE LIST shown below.
Please read the instructions thoroughly before assembly.
1. We recommend that you assemble this product with the assistance of another person; this will make the
assembly easier, and will help eliminate damage to the product or injury to persons during assembly.
2. Please do not tighten screws or bolts until the assembly is completed.
3. To level the chairs or table, before tightening all the screws, the chairs or table must be place on a flat
surface and then tighten the screws.
PARTS LIST
Assembly Instructions
MADE IN VIETNAM PAGE: 1 OF 3
NO.
A
COMPONENT
CHAIR BACK
SKETCH QTY.
4 PCS
B SEAT FRAME 4 PCS
DCUSHION
SEAT 4 PCS
C FRONT LEG 8 PCS
NO.
1FLAT WASHER
5/16” DIA.
SPRING
WASHER
5/16” DIA.
HARDWARE LIST
COMPONENT SKETCH QTY.
44 PCS
244 PCS
NUT
5/16” DIA.
ALLEN
WRENCH
5/16” DIA.
316 PCS
41 PC
LONG BOLT
1/4” x 3”
616 PCS
WOOD SCREW
#8 x 1 1/2”
724 PCS
SHORT BOLT
1/4” x 1 3/4”
512 PCS
4.Please put all parts on a non-abrasive floor before assembly and follow the assembly steps to assemble
your newly purchased product correctly and efficiently.
ITEM NO. D1701-548
GIA 5PC 48" DINING TABLE & 4 CHAIRS

MADE IN VIETNAM PAGE: 2 OF 3
To assemble the chairs, please follow the following steps and repeat for each chair:
STEP 1
Lay the chair back on soft clean surface and install
the seat frame.
5
6
4
4
2
2
1
3
4
2
1
C
C7
D
B
B
B
A
1
STEP 2
Insert long bolts to secure the seat frame.
STEP 3
Install the chair front legs once the seat frame is
secured.
STEP 4
Place the assembled seat frame on the cushion seat
and attach with wood screws.
B
A
Assembly Instructions
ITEM NO. D1701-548
GIA 5PC 48" DINING TABLE & 4 CHAIRS

MADE IN VIETNAM PAGE: 3 OF 3
Assembly Instructions
PARTS LIST HARDWARE LIST
NO.
A
COMPONENT
TABLE TOP
SKETCH QTY.
1 PC
B TABLE LEG 4 PCS
NO.
1
COMPONENT
FLAT WASHER
5/16” DIA.
SPRING
WASHER
5/16” DIA.
SKETCH QTY.
8 PCS
28 PCS
BOLT
5/16” x 60 MM
ALLEN KEY
4 MM
38 PCS
41 PC
To assemble the table, please follow the following step:
ITEM NO. D1701-548
GIA 5PC 48" DINING TABLE & 4 CHAIRS
A
B
1 234
8X