New Holland TV6070 User manual

P ge 1 of 2
MODEL TV6070
Rated PTO power, HP (kw) 105 (78)
ENGINE
Make/model FPT
Type 6-cylinder parent bore diesel
Fuel Injection Bosch mechanical pump, direct injection
Bare engine power, HP (kw) 155 (116)
Rated speed, RPM 2,200
Idle speed, RPM 850-950
Displacement, cu. in. (L) 6 / 411 (6 / 6.7)
Aspiration Turbocharged/air-air intercooled
Air cleaner Dual element dry with aspirated spin tube precleaner
Cold start aids Grid heater/coolant block heater
Bio diesel compatibility Up to 100%
ELECTRICAL
Type 12v negative ground
Batteries Two group 31 low maintenance
Cold start rating, each, CCA 950
Alternator, amps 120
TRANSMISSION
Type Multi-range closed-loop hydrostatic
Pump Variable displacement, mechanical operator control
Motor Electronically controlled 8-range variable displacement
Ground speeds in ranges, MPH ( PH)
1 0 to 6.7 (10.8)
2 0 to 7.7 (12.4)
3 0 to 8.3 (13.4)
4 0 to 9.1 (14.6)
5 0 to 10.3 (16.6)
6 0 to 11.6 (18.7)
7 0 to 16.2 (26.0)
8 0 to 19.5 (31.4)
Braking Dynamic braking by moving lever to neutral position
AXLES AND BRAKES
Axle type HD flange with inboard planetary reduction
Differential lock, cab end Standard
Differential lock, engine end Optional
Oscillation, degrees 10
Brake type Wet disc in cab-end axle, hydraulic actuation
Total brake area, in.2(cm2) 507 (3271)
Parking brake Cable actuation of service brakes
PTO SYSTEMS
Type Mechanical 540/1000 RPM
Shafts Interchangeable 1 3/8" diameter
Locations: cab end Standard
engine end Optional
Engagement Electro-hydraulic
New Holland
TV6070 Bidirectional™Tractor Specifications
TV6070

P ge 2 of 2
MODEL TV6070
HYDRAULIC SYSTEMS
Standard system-type
Type CCLS with piston pump
Total flow @ 2200 engine RPM, GPM (LPM) 29.5 (111)
Pressure compensator, PSI (Bar) 3,000 (207)
Remote valves-standard cab end 3
In-cab flow controls 3
Valve actuation Hand levers, foot pedals
Remote valves-optional engine end 2
Valve actuation Hand levers
Couplers 1/2" ISO, 2 for each valve
Optional auxiliary hydraulics
Type CCLS with piston pump; electronic flow control
Maximum flow @ 2200 engine RPM, GPM (LPM) 35 (133)
Pressure compensator, PSI (Bar) 4350 (300)
Couplers 3/4" ISO, with 1/2" case drain
3-POINT HITCHES
Type Category II, flex link ends and sway links
Controls Electronic position control, auto and manual modes
Standard cab end
Lift capacity @ 24" behind links, lbs. (kg) 6,500 (2950)
Optional cab end
Lift capacity @ 24" behind links, lbs. (kg) 8,700 (3950)
Optional engine end
Lift capacity @ 24" behind links, lbs. (kg) 4,000 (1800)
STEERING
Type Hydrostatic power
Articulation angle 45 degrees maximum
Curb clearance circle, ft. in. (m) 32' 10" (10.0)
CAB
Type 2-Door ROPS/FOPS
Tinted safety glass, area, ft2(m2) 61 (5.67)
Climate control Pressurizer, heater/defroster, air conditioning
Fan 3-speed
Seat Air suspension, 7 comfort adjustments
Turnabout™ console 210 degree rotation to face either driving direction
DRAWBARS
Type 3-position adjustable, swinging
Cab end Standard
Engine end Optional
REFILL CAPACITIES
Fuel tanks, gal. (L) 55 (208)
Engine oil, gal. (L) 5 (19)
Engine coolant, gal. (L) 7.25 (27)
Hydraulic system/rear axle, gal. (L) 13.5 (51)
Front axle, gal. (L) 6.5 (25)
Safety begins with a th r ugh understanding f
the equipment. Always make sure y u and
y ur perat rs read the Operat r’s Manual
bef re using the equipment. Pay cl se
attenti n t all safety and perating
decals and never perate machinery
with ut all shields, pr tective devices
and structures in place.
Design, materials and/ r specificati ns are subject t
change with ut n tice and with ut liability theref r.
Specificati ns are applicable t units s ld in Canada, the
United States, its territ ries and p ssessi ns, and may
var y utside these areas.
© 2009 CNH America LLC
New H lland is a registered trademark f CNH America LLC.
Visit ur Web site at www.newholland.com/na. Or, call t ll-free 866-NEW-HLND (866-639-4563).
New Holland
TV6070 Bidirectional™Tractor Specifications
TV6070