New Works Lantern Pendant Medium User manual

Assembly & Care Guide
Lantern Pendant, Medium
[email protected] Frederiksgade 1, Ground Floor, 1265 København DK www.newworks.dk
e Lantern Pendant is carefully handcrafted and therefore every item is unique.
It may occur dierent expression in the material and surface, with smaller marks and minor deviations.
SAFETY INSTRUCTIONS
Please read the instructions carefully and retain it for future reference. New Works Aps is not responsible for any
faults or damages caused by not following the instructions correctly.
Turn o electricity at main circuit breaker panel before beginning the installation. Warning all wires are connected
- when unpacking the box, be careful not to pull wires, as this may result in a bad connection.
Dierent Ceiling materials require dierent types of screws and plugs, always use screws and plugs that ts the
ceiling material.
Follow the guidance 220-240V~ 50/60Hz, E27 Max 60W / LED Max 11W (Bulb not included)
e light bulb and lamp exterior may get hot after prolonged use.
Turn o the power before replacing the bulb. Make sure the bulb has sucient time to cool down. Do not subject
the lamp to any shock as this may cause the lamp to brake.
Keep the product out of children’s reach. Dispose the packaging and do not allow children to play with it.
Do not modify the product in any way.
CLEANING
Turn o the electricity before cleaning the lamp. Wipe the lamp exterior with a soft dry or moist cloth. Do not use
any abrasive cleaning tools, and never use strong cleaning agents such as household glass cleaner, white spirit or
turpentine.
MORE INFORMATION
For more information such as product overview, material description and disclaimers - please visit our website at
www.newworks.dk for further information. If you have any questions or comments, please do not hesitate to
contact us at [email protected].

Assembly & Care Guide
Lantern Pendant, Medium
[email protected] Frederiksgade 1, Ground Floor, 1265 København DK www.newworks.dk
ASSEMLBY:
1. Turn o electricity on the circuit breaker before installing the lamp.
2. Mount the cord (A) in the ceiling before mounting the glass shade.
3. Connect the wires with the power outlet in the ceiling.
4. Install the light bulb (B) bulb not included.
5. Mount the glass shade (C) by inserting the suspension plate (D) into the glass shade
6. Place the top ring (E) on top of the shade.
7. Level lamp the by moving it around on the Suspension Plate (D).
(B)
(A)
(C)
(D)
(D)
(E)