Newcon Optik Sentinel User manual

Operation Manual
THERMAL IMAGING BINOCULARS
SENTINEL
105 Sparks Ave., Toronto, ON, M2H 2S5, Canada

1

2
CONTENTS
1.BRIEF DESCRIPTION ............................................. 3
Overview ......................................................................... 3
Key Features of the SENTINEL...................................... 4
2.DESIGN OF THE SENTINEL .................................. 5
3.DELIVERY SET........................................................ 6
Standard Delivery Set...................................................... 6
Optional Delivery Set ...................................................... 6
4.SPECIFICATIONS.................................................... 7
5.STARTUP AND INITIAL TESTING ....................... 9
Use of Standard Power Supply ........................................ 9
Connecting with video recorder..................................... 10
Testing the Unit’s Readiness ......................................... 10
7.SYSTEM CONTROLS............................................ 11
8.DISPLAY................................................................. 13
9.WARRANTY........................................................... 14
10.CUSTOMER SUPPORT ......................................... 15
11.ACCEPTANCE CERTIFICATE ............................. 18

3
1. BRIEF DESCRIPTION
Overview
Designed for law enforcement, military and commercial use, the
SENTINEL Thermal Binoculars are ideal for reconnaissance
and surveillance, perimeter security, wildlife observation and
control and a variety of other applications. Rugged and
lightweight, the SENTINEL delivers excellent image quality for
observation through total darkness and poor visibility conditions
including smoke, fog and most visual obscurants.
The device is equipped with a highly sensitive, uncooled thermal
detector and a high resolution color display, resulting in a crisp,
sharp image, regardless of ambient conditions. The device can
be used as handheld or hands-free (being worn on a head or
helmet) binoculars with a wrist strap provided to secure the
instrument in hand.
The SENTINEL is equipped with a digital USB interface for
programming in the field. Power supply options include Li-Ion
rechargeable batteries (optional), four AA batteries or external
power through a watertight connector. The SENTINEL features a
2x and 4x digital zoom, along with various color scheme options
for the display. The unit’s operating status is shown on the
display.

4
Key Features of the SENTINEL
High quality image within the entire field of view
MIL-SPEC housing, waterproof to 1 meter
Low battery indicator shown in field of view
Variable colour schemes (image polarity)
PAL + NTSC video output
Compact and lightweight design
Optional video or still image recording

5
2. DESIGN OF THE SENTINEL
1. Fixed objective lens
2. Objective lens focus adjustment ring
3. Multifunctional Connector with Protective Cap
4. Menu button
5. Rubber eye guard
6. Eyepieces with Diopter Adjustment Ring
7. Digital Zoom
8. “Black-hot” / “White-hot” / Sepia Control button
9. Battery compartment cover
10. Battery cover lock
11. ON-OFF button
12. Tripod mount
FIGURE 1.
SENTINEL
8
7

10 1
11
6
5
3
4
9
2
12

6
3. DELIVERY SET
Standard Delivery Set
QUANTITY
SENTINEL 1
Objective Lens Cap 1
Operation Manual 1
Soft Case 1
AA Batteries 4
Car power adaptor 1
USB Cable 1
Video/Charge Cable 1
Shoulder Strap 1
Optional Delivery Set
Tripod
Hard case
Attention: Exact Delivery Set is subject to the specific contract
terms.

7
4. SPECIFICATIONS
Detector 320 640
Resolution 324x256 640x512
Full Frame Rates 30 Hz (NTSC); 25 Hz (PAL)
Exportable Frame Rates 7.5 Hz (NTSC); 8.3 Hz (PAL)
Pixel Size 25μ17μ
Operating wavelength 7.5 - 13.5 μm
Sensitivity <50mK at F1.0
Optics
Objective Lens 60 mm
Objective F Number F1.25
Field of View 7.6°x5.7° 10.4°x8.3°
Interpupilary Distance 58 mm – 72 mm
Eye Relief 25 mm
Dioptric Correction -6 …+2
Digital zoom 2x, 4x
Electronics
Refresh Rate 9-25 Hz (PAL) 8-30 Hz (NTSC)
Video Output PAL and NTSC programmable
Display AMOLED, 800x600
Interface for
programming USB

8
Mechanical
Temperature Range -40 °C to +50 °C
Shock Resistance 300g
Battery Type 4 x AA
Hours of Operation 6 (rechargeable) / 8 (battery)
Dimensions 150x146x72 mm
Weight with Battery 0.775kg

9
5. STARTUP AND INITIAL TESTING
Use of Standard Power Supply
The unit is powered by either 4 AA alkaline or 4 AA NiCad
rechargeable (optional) batteries.
Ensure the rechargeable batteries are completely charged before
operating (you must not charge the batteries inside of the device).
If the battery is completely discharged, the battery indicator
blinks will turn red. To connect unit to the car outlet, use the
supplied car adaptor (shown below).

10
Connecting with video recorder
(Does not come with the unit - Can be purchased separately)
The SENTINEL can be connected to an external monitor or
video recorder. The video output is combined with the
multifunctional interface connector. Use the cable that is
included in the device delivery set to connect the SENTINEL to
external devices
Testing the Unit’s Readiness
1. Turn the unit on by pressing and holding the ON‐OFFbutton
for 1 second. The screen will switch on.
2. Using the two diopter rings, adjust the display clarity.
3. The unit is ready for operating.
4. Turn the unit off by pressing and holding down the ON‐OFF
button for one second. The POWER OFF caption will
appear on the screen.

11
7. SYSTEM CONTROLS
The ON-OFF control button is used not only to turn on and off
the device, but to activate the MENU as well. One short press on
this button activates the screen menu that controls brightness and
contrast of the screen. An extended press of this button in the
main mode turns the device off. The arrow buttons control zoom
and image presentation scheme in the main mode and change the
brightness and contrast in the menu mode. The table below
describes the functionality of each control button.
Control Button Functionalities in the Main Operating Mode
Control Button
Diagram and Name
, result of rapid press
(≤0.5 seconds)
, result of extended
press (≥1.0 second)
Button 3*
WH|BH
Toggles between ‘white
hot’ , ‘black hot’ , ‘sepia’
and ‘rainbow’ image
scheme
Triggers sensor calibration
Button 1*
ON/OFF Menu Turns the device on and off
Button 2*
ZOOM
Switches between zoom
values (1x, 2x, 4x)
Shows/removes frame on
the display
*see page 5 for details

12
Control Button Functionalities in the Brightness/Contrast Menu
Control Button
Diagram and
Name
, result of rapid press
(≤0.5 seconds)
, result of extended
press (≥1.0 second)
Button 3*
WH|BH
Increases selected
parameter by one unit N/A
Button 4*
MENU
Toggles between
brightness/contrast
parameters
Exits menu
Button 2*
ZOOM
Decreases selected
parameter by one unit N/A
* see page 5 for details

13
8. DISPLAY
In the main mode display provides an image of the observed
object. Permanently depicted service information includes the
battery status indicator and zoom number (if different from 1x).
Information about image presentation appears for five seconds
after this parameter is changed. In the menu mode the user can
control brightness and contrast settings. After exiting the menu
mode, the user is returned to the main mode window.
Icon Display
Zone Icon Description Icon Display Conditions
I1A1 Recording is active During recording
I
1A1 Pause during recording 1 sec
I1A1 Single screen capturing 1 sec
I1A1 Sequence of screen
capturing Only during recording
IС1 Calibration 1 sec
B3 Chosen digital
magnification value
Permanently (х1is not
displayed)
C3 Battery charge status When the unit is powered by
the battery set
1 Optional function. Available only if recording feature is supplied
x4
х2

14
9. WARRANTY
NEWCON OPTIK warrants this product against defects in
materials and workmanship for one year from the date of the
original purchase. Longer warranty is available, subject to the
terms of the specific sales contract. Should your Newcon Optik
product prove to be defective during this period, please deliver
the product securely packaged in its original container or an
equivalent, along with the proof of the original purchase date, to
your Newcon Optik Dealer.
Newcon Optik will repair (or, at its option, replace with the same
or comparable model), the product or part thereof, if upon
inspection, it is found to be defective in material or
workmanship.
What This Warranty Does Not Cover:
NEWCON OPTIK is not responsible for warranty service should
the product fail as a result of improper maintenance, misuse,
abuse, improper installation, neglect, damage caused by disasters
such as fire, flooding, lightning, improper power supply, or
service other than by an Authorized representative.
Postage, insurance and shipping costs incurred while presenting
your Newcon Optik product for warranty service are your
responsibility. If shipping from North America please include a
cheque or money order payable to NEWCON OPTIK for the
amount of $15.00 to cover handling and return shipping.

15
10. CUSTOMER SUPPORT
Should you experience any difficulties with your Newcon Optik
product, consult this manual first. If the problem persists, contact
our customer support department at [phone] or toll
free at 1-877-368-6666 (North America only). Our operating
hours are 9am-5pm, Monday - Friday, Eastern Standard Time.
Under no circumstances should any equipment be sent to
Newcon Optik without authorisation from our technical
support department.
Newcon Optik accepts no responsibility for unauthorized
returns.
To locate a Newcon Optik Authorized Dealer call
[phone] or fax [phone]
Email: [e-mail]
Web: www.newcon-optik.com
Defective products should be shipped to:
105 Sparks Ave., Toronto ON, M2H 2S5, CANADA

16
This page was intentionally left blank

17
This page was intentionally left blank

18
11. ACCEPTANCE CERTIFICATE
Thermal Imaging System
Resolution 320 640
SENTINEL 60 mm lens
Unit serial number: _________________________________
The unit complies with all technical specifications and has
passed the inspection.
Date of production: _________________________________
Quality Inspector’s signature: __________________________
Quality Assurance Seal

NEWCON OPTIKPrinted in Canada
R1– 10.12