Newfeellight F6022 User manual

I
F6022 6 Eye RGBW Laser Lights For Party
User Manual

II
Thank you For using six eyes laser projector .For the sake of safety and better operation of this
projector, please read this manual carefully before use and operate the projector, lest incur any
personal injury or damage to the projector.
●Instructions:
After opened the box, check whether the laser show device has been damaged by the rough
transportation or not, such as the screw is loosen, reflective lens is broken. Please check before
connecting power. Check the lighting placement is correct and secure, check the power voltage is the
same with this product, or damage to the lamp is not an example of warranty.
●Technical Parameters:
Function mode setting：
1. LED display screen
MENU Main menu is to switch
UP Parameter adjustment
DOWN Parameter adjustment
ENTER Confirm/ Save / enter the submenu
●Mode setting
Serial
number
Rated Voltage
AC110V /230V ±10％/50Hz～
60Hz
1
Power
consumption
20W
2
Laser power
green：60-80mw/ 532nm，
red：100-150mw/650nm*2，
blue：100-500mw/450nm
3
Laser color
RGB
4
Operating
environment
indoor
5
Control mode
DMX512、auto、sound
6
channel
8CHS
A001
A512
PXXX
P1-1~P1-9
Red，Motor from slow to fast
P2-1~P2-9
Green，Motor from slow to fast
P3-1~P3-9
Blue，Motor from slow to fast
P4-1~P4-9
RGB jumping change，Motor from slow to fast
P5-1~P5-9
7colorjumping change，Motor from slow to
fast
P6-1~P6-9
Gradually change ，Motor from slow to fast
P7-1~P7-9
Pulse change ，Motor from slow to fast
MENU UP DOWN ENTER

III
DMX-512channel function
● Maintenance:
It is very important to keep the light clean, therefore please clean reflector lens monthly to keep the
lights away from dust, dirt or fog juice. We suggest that clean the light with professional glass cleaning
P8-1~P8-9
Strobe from slow to fast
SO01
Sound mode1
SO02
Sound mode2
channel
DMX Value
Content
CH1
0
Light off
1-255
Total dimming，from dark to bright
CH2
0-2
Red off
3-255
Red dimming，from dark to bright
CH3
0-2
Green off
3-255
Green dimming，from dark to bright
CH4
0-2
Blue off
3-255
Blue dimming，from dark to bright
CH5
0-9
off
10-255
Strobe from slow to fast
CH6
0-9
Motor no effect
10~255
Motor position control
CH7
0
Motor no effect
1~127
Motor reversal from fast to slow
128~255
Motor forward from slow to fast
CH8
0-50
dimming, CH1-CH7 valid
51-58
Red
59-65
Green
66-72
Blue
73-79
Red +Green
80-86
Blue+Green
87-93
Red+Blue
94-100
RGB
101~150
Color jumping change, motor is running
151~200
Gradually change
201~250
Pulse change
251~255
Sound

IV
lotion and downy cloth. Keep the light. Clean regularly will not only maintain the maximum laser output
brightness but also will extend the life span of the laser.