Newland BS8050-3V Piranha User manual

BS8050-3V Piranha (1D)
Barcode Scanner
User Guide

Disclaimer
© 2015 Fujian Newland Auto-ID Tech. Co., Ltd. All rights reserved.
Please read through the manual carefully before using the product and operate it according to the manual. It
is advised that you should keep this manual for future reference.
Do not disassemble the device or remove the seal label from the device. Otherwise, Fujian Newland Auto-ID
Tech. Co., Ltd. does not assume responsibility for the warranty or replacement.
All pictures in this manual are for reference only and actual product may differ. Regarding to the product
modification and update, Fujian Newland Auto-ID Tech. Co., Ltd. reserves the right to make changes to any
software or product to improve reliability, function, or design at any time without notice. Besides, the
information contained herein is subject to change without prior notice.
The products depicted in this manual may include software copyrighted by Fujian NewlandAuto-ID Tech. Co.,
Ltd or a third party. The user, corporation or individual, shall not duplicate, in whole or in part, distribute,
modify, decompile, disassemble, decode, reverse engineer, rent, transfer or sublicense such software without
prior written consent from the copyright holders.
This manual is copyrighted. No part of this publication may be reproduced, distributed or used in any form
without written permission from Newland.
Fujian Newland Auto-ID Tech. Co., Ltd. reserves the right to make final interpretation of the statement above.
Fujian Newland Auto-ID Tech. Co., Ltd.
3F, BuildingA, No.1, Rujiang Xi Rd., Mawei, Fuzhou, Fujian, China 350015
http://www.nlscan.com

Revision History
Version
Description
Date
V1.0
Initial release.
March 18, 2015

Table of Contents
Revision History.......................................................................................................................................... - 3 -
Preface...............................................................................................................................................................1
Introduction...................................................................................................................................................1
Chapter Descriptions....................................................................................................................................1
Safety Instructions........................................................................................................................................1
Chapter 1 Getting Started................................................................................................................................2
Introduction...................................................................................................................................................2
Unpacking ....................................................................................................................................................2
Piranha Scanner..........................................................................................................................................3
Functions of the Buttons..............................................................................................................................4
Charging the Battery....................................................................................................................................5
Connecting the Piranha to Smartphone/Tablet ...........................................................................................6
LED Notifications..........................................................................................................................................8
Turning the Piranha On/Off..........................................................................................................................9
Scanning Instructions.................................................................................................................................10
Scanning 1D Barcode..........................................................................................................................10
Chapter 2 System Settings............................................................................................................................11
Introduction................................................................................................................................................. 11
Restore Factory Defaults........................................................................................................................... 11
Operating Modes........................................................................................................................................ 11
Query Scanner Information........................................................................................................................13
Query/Delete the Data in FLASH...............................................................................................................13
Sound Notifications....................................................................................................................................14
Vibration Notifications ................................................................................................................................15
Terminating Character Suffix......................................................................................................................16
Inter-Character Delay for Bluetooth HID....................................................................................................17
Delete Bluetooth Pairing............................................................................................................................17
Automatic/Manual Power-Off.....................................................................................................................18
Time Stamp................................................................................................................................................20
Set Date Format...................................................................................................................................20
Set Date & Time...................................................................................................................................21

Parameters of USB HID-KBW ...................................................................................................................22
USB Country Keyboard Types.............................................................................................................22
Convert Case.......................................................................................................................................23
Inter-Keystroke Delay for KBW............................................................................................................23
Upgrade the Firmware...............................................................................................................................24
Chapter 3 Symbologies.................................................................................................................................27
Introduction.................................................................................................................................................27
1D Symbologies.........................................................................................................................................27
Code 39................................................................................................................................................27
Transmit Code 39 Start/Stop Character..............................................................................................27
Code 39 FULLASCII ...........................................................................................................................27
Code 128 .............................................................................................................................................28
UCC/EAN-128......................................................................................................................................28
EAN-8...................................................................................................................................................28
EAN-13.................................................................................................................................................28
ISSN.....................................................................................................................................................29
ISBN.....................................................................................................................................................29
UPC-E..................................................................................................................................................29
UPC-A..................................................................................................................................................29
Interleaved 2 of 5.................................................................................................................................30
Matrix 25..............................................................................................................................................30
Industrial 25 .........................................................................................................................................30
Codabar...............................................................................................................................................30
Code 93................................................................................................................................................31
GS1 Databar (RSS).............................................................................................................................31
Code 11................................................................................................................................................31
Plessey.................................................................................................................................................31
MSI-Plessey.........................................................................................................................................32
Appendix.........................................................................................................................................................33
Factory Defaults Table ...............................................................................................................................33
Digit Barcodes............................................................................................................................................36

1
Preface
Introduction
This manual provides detailed instructions for setting up and using the NLS-BS80 barcode scanner
(hereinafter referred to as “the BS80”or “the scanner”).
Chapter Descriptions
Chapter 1, Getting Started : This chapter provides information on getting the scanner up
and running for the first time.
Chapter 2, System Settings : This chapter describes the barcode programming procedure
and shows you how to configure system parameters.
Chapter 3, Symbologies : This chapter lists all compatible symbologies and describes
how to configure the relevant parameters.
Appendix : This chapter offers factory defaults table and a bunch of
frequently used programming barcodes.
Safety Instructions
Read the operating instructions carefully and especially observe the safety information. If you do
not follow the safety instructions on proper handling in this manual, we assume no liability for
any resulting personal injury or damage to property.
Don’t put the scanner in places with excessively high temperatures, such as exposure to direct
sunlight.
Don’t use the scanner in extremely humid area or drastic temperature change.
The rechargeable battery is permanently built into the scanner and cannot be replaced.
Never damage the rechargeable battery. Damaging the casing of the rechargeable battery might
cause an explosion or a fire!

2
Chapter 1 Getting Started
Introduction
The Piranha is a wireless pocket barcode scanner equipped with 1D or 2D scan engine to meet different
needs. It is a great space-saver for busy or limited workspaces. It also supports iOS, Android, and
Windows devices through Bluetooth HID or SPP communication.
An illustrated introduction to the Piranha is included in this chapter. If you have the scanner at hand,
make good use of it to develop a better understanding of this manual. This chapter is written for normal
users, maintenance staff and software developers.
Unpacking
Open the package and take out the scanner and its accessories. Check to make sure everything on the
packing list is present and intact. If any contents are damaged or missing, please keep the original
package and contact your dealer immediately for after-sale service.

3
BS80 Scanner
1
Charging/Battery LED
2
Good Read LED
3
Data LED
4
Scan/Power Button
5
Delete/Reset Button
6
Function Button/Function LED
7
Micro USB Port
8
Product Label
9
Scan Window: Please remove the protective
sticker from the window before use.

4
Functions of the Buttons
Scan/Power Button
*Press the button to scan barcode when the scanner is on.
*Hold down the button for 3 seconds to power it on when the scanner is off.
Delete/Reset Button
*Press the button to remove the corresponding data from the USB storage area of FLASH
memory in the USB mode before scanning the barcode to be deleted.
*Hold down the button for 7 seconds to reset it when the scanner is on.
Function Button
*Press the button to turn on the HID keyboard of the connected iOS device in the Wireless
mode.
*Hold down the button for 5 seconds to unpair paired Bluetooth device from the scanner in the
Wireless mode, to make the scanner discoverable by other Bluetooth device.
*Hold down the button for 3 seconds to start data transmission via USB in the USB mode
(Make sure that the scanner is connected to PC first.)
Scan/Power Button + Function Button
*Hold down the two buttons at the same time for 3 seconds to toggle between the Wireless
mode and USB mode when the scanner is on.
Delete/Reset Button + Function Button
*Hold down the two buttons at the same time for 7 seconds to upgrade the firmware via USB
after clicking the “Start”button of the firmware upgrade utility on PC that the scanner is
connected to.
Scan/Power Button + Delete/Reset Button
*Press the two buttons at the same time to check the battery level with the Charging/Battery
LED when the scanner is on.

5
Charging the Battery
Charge the scanner by connecting it to a host device with USB cable, as shown below.
Note: Low battery may result in failure or misoperation of the scanner. Before your first use, charge the
battery for 3-4 hours.

6
Connecting the BS80 to Smartphone/Tablet
1. Make sure your device has HID or SPP profile.
2. Turn off the Power-Saving mode of your smartphone/tablet first. If the red Function LED on the scanner
illuminates, hold down the Scan/Power button and Function button at the same time for 3 seconds or
scan the barcode below to switch to the Wireless mode.
Wireless Mode (Default)
3. Scan the appropriate barcode below to choose HID or SPP profile before connecting to
smartphone/tablet. If you don’t know what profile your device is, please try HID profile first, then SPP
profile.
HID (Default)
SPP
4. Complete the following connection procedure (example: pairing with iPhone). If the Piranha does not
appear in the search results in step (5), you might need to delete existing pairing information on the
scanner by holding down the Function button on the scanner for 5 seconds (see Functions of the
Buttons in this chapter) or by scanning the Delete Bluetooth Pairing barcode (see Delete
Bluetooth Pairing in Chapter 2).

7
(1) Click “Settings”.
(2) Click “General”.
(3) Click “Bluetooth”.
(4) Turn it on and search the
devices.
(5) Select “BS80XXXX”to
connect.
(6) The “Connected”message
means the connection is OK.
5.After the connection is completed, the blue Function LED on the scanner will illuminate.
6. Before using WordPad file or relative APP, please set keyboard language of the device to USA
language. Then, scan the barcodes and the barcode data will show on the cursor side. If the data
cannot send to smartphone/tablet, please scan the Restore Factory Defaults barcode.
Note: This product complies with Bluetooth standards. The device that communicate with this product
must support the same SPP or HID. For other Bluetooth devices with other profiles, we cannot
guarantee a connection before the product has been tested.
The communication speed and range of the product may vary due to obstacles and radio wave
condition between the product and device to which it is connected. Condition on the host device
may also affect the communication speed and range of the scanner.
BS80XXXX
BS80XXXX Connected

8
LED Notifications
Charging/Battery LED
Red LED on
Charging in progress.
Green LED on
Fully charged.
Red and green LEDs flash alternately
Battery not found.
Red LED flashes
Low battery alert.
If the scanner is on and it is not connected to PC via USB cable, pressing the Scan/Power
button and Delete/Reset button at the same time can display the battery level with the
Charging/Battery LED.
Green LED on
Battery level is high.
Red and green LEDs on
Battery level is medium.
Red LED on
Battery level is low.
When the battery voltage is too low, the scanner will beep with flashing red Charging/Battery LED. Please
charge it immediately before the scanner shuts down mandatorily. When it shuts down, please charge it
fully before turning it back on.
Good Read LED
Green LED flashes
Good read.
Data LED
Red LED flashes
There is data in FLASH memory.
Red LED on
FLASH memory depleted.
Function LED
Blue LED flashes slowly with long off state
Bluetooth turned on, but no Bluetooth
connection established and the Piranha not found.
Blue LED flashes slowly with long on state
Bluetooth turned on, but no Bluetooth
connection established and the Piranha found.
Blue LED on
Bluetooth connection established.
Blue LED flashes quickly
Data transmission via Bluetooth in progress.
Red LED on
USB mode enabled.
Red LED flashes quickly
Batch data transmission via USB in progress.

9
Turning the Piranha On/Off
Turn the scanner on:Press the Scan/Power button.
Turn the scanner off: By default, the scanner automatically powers off if no operation is performed on the
scanner for 30 minutes. You can adjust the auto power-off time. You can also turn off the scanner by scanning
the Power Off barcode. For more information, see Automatic/Manual Power-Off section in Chapter 2.

10
Scanning Instructions
Scanning 1D Barcode
Adjust the scan angle (Do not read barcode at vertical degree) or the distance between barcode and the
scanner to ensure that the length of the scan line is roughly 8mm greater than that of the barcode, as
shown below.

11
Chapter 2 System Settings
Introduction
This chapter describes how to configure the basic system parameters on the scanner.
Restore Factory Defaults
Restore Factory Defaults
Operating Modes
The scanner provides two operating modes: Wireless mode (Bluetooth mode) and USB mode.
1. Wireless mode
Wireless Mode (default)
When the scanner is in the Wireless mode, scanning the following barcodes can switch between
Bluetooth HID and SPP profiles. When the scanner is in the USB mode, scanning the following barcodes
can switch between USB HID-KBW and USB COM Port Emulation.
Wireless Mode: HID (default)
USB Mode: USB HID-KBW (default)
Wireless Mode: SPP
USB Mode: USB COM Port Emulation

12
There are two data transmission modes: Synchronous mode andAsynchronous mode.
(1) Synchronous mode: When you scan barcodes, the data will be sent to smartphone/tablet directly. If
you are out of Bluetooth service range, scanned data will be lost.
(2) Asynchronous mode: When you are out of Bluetooth service range, scanned data will be saved in the
FLASH memory. Once you are back to service range, the data will be sent to smartphone/tablet
automatically. The scanner will automatically remove it from the FLASH memory after smartphone/tablet
receives the data.
Synchronous Mode
Asynchronous Mode (default)
2. USB mode
When you scan barcodes, the data will be saved in the FLASH memory. You can sync the data acquired
in USB mode from the FLASH memory to your PC by following the procedure described below.
Data transmission from FLASH to PC via USB:
Step 1: Install the required driver on your PC.
Step 2: Connect the scanner to your PC with USB cable. The scanner beeps when the connection
between them is established.
Step 3: Open Notepad or Office Word on your PC and make sure that your cursor is always positioned in
it. Hold down the Function button on the scanner for 3 seconds or longer to start data transmission from
the FLASH memory to your PC. To suspend or resume the transmission, press the Function button briefly.
The scanner beeps when the transmission is completed.
USB Mode
Note:
1. When the scanner switches from one operating mode to the other, it beeps along with corresponding
LED notification (For more information, see LED Notifications in Chapter 1)
2. Besides the method mentioned above, you can also hold down the Scan/Power button and Function
button at the same time for 3 seconds to toggle the Wireless mode and USB mode.

13
Query Scanner Information
Query the Firmware & Hardware Versions of Scanner
Query the Firmware Version of Scan Engine
Query the Manufacture Date of Scanner
Query the Serial Number of Scanner
Query/Delete the Data in FLASH
The FLASH memory is divided into a USB storage area (used to save the data acquired in the USB mode)
and a Bluetooth storage area (used to save the data acquired in Bluetooth asynchronous mode). You
should note that removing data from the USB storage area may take a longer time.
Delete All Barcodes in FLASH
Query the Number of Barcodes in USB Storage Area
Only Delete Barcodes in USB Storage Area
Query the Number of Barcodes in Bluetooth Storage Area
Only Delete Barcodes in Bluetooth Storage Area

14
Sound Notifications
Turn sound notifications on or off by scanning the appropriate barcode below.After this feature is enabled,
the scanner beeps when one of the following events occurs:
1. The scanner is turned on.
2. The scanner resets.
3.A barcode is decoded (including good read for removing barcode data from the FLASH memory).
4. The scanner switched to the Wireless mode or USB mode.
5. Transmitting data via Bluetooth failed.
6. iOS soft keyboard is turned on or off.
7. Data transmission via USB starts.
8. Data transmission via USB is interrupted.
9. Data transmission via USB is completed.
10. The paired Bluetooth device is unpaired from the scanner.
11. The scanner is turned off.
12. USB connection between the scanner and the host established.
13. USB connection between the scanner and the host lost.
14. Bluetooth connection between the scanner and the host established or lost.
Sound Notifications On (default)
Sound Notifications Off