Newskill EROS Manual

EROS
INSTRUCTION GUIDE

COMPONENTS
1
5
15
11
12
10
9
13
6 7
14
8
2 3
4
Backrest
Seat
Arm rests
Mechanism Gas Li&Gas Li Cover Steel plate
Hex Key
Side Covers
Base
Castors X5 M8x20mm Screws X2
M6x20mm Screws X4 M8x45mm Screws X2
M6x30mm Screws X3 Plastic Cover X4

MOUNTING STEPS
11
1
7
4
6
6
9
1
2
Push and twist the wheels into the star base.
And place the cylinder cover over the gas li.
Install the steel plate to backrest
11
M6x30mm Screws X3

5
2
10
3
10
Align the buerfly mechanism with the screw
holes at the bootom of the seat as shown in
image above.
M6x20mm Screws X4
Rubber gaskets can reduce the noise when
the chair is in motion. You can choose
whether to install it.
The Rubber Gasket
11
4
Aache the seats to the base.

5
6
Install the backrest to seat,
and put on the cover
Fasten the armrest with
provide screws to finish.
8
12 3
13
14
14
12
13
M8x20mm Screws X2
M8x45mm Screws X2