Newskill BANSCHEE Manual

INSTRUCTION GUIDE

INSTRUCTION GUIDE

COMPONENTS
A
D
G
H I J K
N R
O S
L P
M Q
E F
B
C
Backrest Seat
Mechanism Gas Li
Lumbar Support Cushion
Head Support
Cushion
Gas Li Gas Li Cover Side Covers
M8*25mm
Screws x16
M5*10mm
Screws x2
Small Side
Cover x2
Hexkey
Castors X5
Lumbar Support Cushion

MOUNTING STEPS
H
I
E
F
M
Q
J
L
1
2x3
L
M
Q
M8*25mm Screws x16
M5*10mm Screws x2
Small Side Cover x2
Push and twist the wheels into the base.
And place the cylinder cover over the gas li.
Fixing the backrest and seatwith screws,
put on the side cover and the small cover,
and repeat to complete both sides.

3
4
Fixing the armrest with seat
Align the buerfly mechanism with the screw holes
at the bootom of the seat as shown in image
Rubber gaskets can reduce the noise when
the chair is in motion. You can choose
whether to install it.
The Rubber Gasket
L
L
L
L
L
O
P
N
L
L
L
L
L
L
M8*25mm Screws x16
M8*25mm Screws x16
N
O
P

5
6
Aache the seats
to the base.
Finish

ATTENTION!
GOT QUESTIONS?
1. Verify all parts before assembly.
2. The pictures in this guide may not look like your chair, but the instruction
guide is the same regardless of model.
3. Do not use the chair unless all the bolts and screws are tight.
4. At least every six months check all botls and scres to ensure they are tight.
5. Don not use this chair as a step stool/ladder.
Go newskillgaming.com