Nexkey Solo User manual
Nexkey Solo
Install
Instructions
(Metal Frame)
Remove
Strike Plate Mark Cutout
with Guide
Cut Front of
Frame
Remove
Material
Cutout Dust
Box (If
needed)
File Down Sharp
Edges
Install Goof Plate Check Fit Install Tab Mounts
(If needed)
Install and Unlock
Solo with App
Notes:
Door Closer Required With Solo install (to help prevent pre- load) along with the Solo
Latch guard recommended if there is significant gap between door and Solo
Extended Length Faceplates Plates are available upon request for Wood Frames
Extended Length Goof Plates are available upon request
Not intended for center hung doors
Check Location of Deadlatch
(if applicable)
Install
Deadlatch
stop (If
Applicable)
Test Solo and Send
Digital Keys to
Customer
Recommended Tools
1. Dremel Tool w/ metal cutting wheel
2. Pliers
3. Metal File
4. Pencil
5. Power Drill with phillips head bit
6. Phillips head screwdriver (#1)
7. Ruler
Nexkey Solo
Install
Instructions
(Wood Frame)
Remove
Strike Plate Mark Cutout with Guide (Adjust as Necessary)
Due to Trim on door, mark and
cutout for trim enhancer
Cutout tabs for Solo on
wood stud (~⅛” deep)
With Self Centering Vix Bit, Drill Pilot Hole
(Prevents Frame Cracking)
Cutout Frame using Oscillating Tool
Notes:
Door Closer Required With Solo install (to help prevent pre-load) along with the Solo
Latch guard recommended if there is significant gap between door and Solo
Extended Length Faceplates Plates are available upon request for Wood Frames
Extended Length Goof Plates are available upon request
Not intended for center hung doors
Dry Fit and Make
adjustments as needed If possible, add paint with valve paint marker Secure Lock and Test
(Shim Strike towards lock if needed)
Recommended Tools
1. Oscillating Tool with Plunge Cutter
2. Wood Chisel Set
3. VIX Drill BIT Set
4. Valve Paint Marker
5. Pencil
6. Ruler
7. Power Drill with phillips head bit
8. Phillips head screwdriver (#1)
Battery Changes
Remove security screw
using provided T6 Screwdriver
Remove Black Cover
Remove Batteries by hand,
Install new batteries with (+)
terminal pointing towards each
other
Ready to send those old bulky keys far, far away?
We get it! You’re excited to have Nexkey installed in
your space, but now what?
You, as the admin, will receive your smart keys from
Nexkey. If you haven’t done so already, download
our Nexkey app from the app store, and set up an
account to get access to your smart keychain!
This guide will walk you through the entire Nexkey
smart access platform. We hope you enjoy!
Let’s get started
Nexkey App
Unlock your business nearby or on the go for contractors or guests, share and revoke access, monitor user
trac to your space in real-time, set time restrictions for users, set business hours, and more
Apple App Store
Google Play Store
12 3 4 5
Set up an account
Download App
and sign up
Click sign up at the
bottom of the screen
Enter information Read and accept
our Terms &
Conditions
Verify Email
Enter the code into the
app that was sent to you
via email
You have access
to your keys!
Open app to unlock
screen (nearby)
Tap the door you
would like to open
Wait for unlock
checkmark
You can open
the door!
App also available
on Apple Watch
and iPad
Unlock Nexkey Solo
FCC Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and2. This device must accept any interference received, including
interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to
operate the equipment.
FCC Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
- This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating
instructions for satisfying RF exposure compliance. This transmitter must be at least 20 cm from the user and must not be co-located or operating in
conjunction with any other antenna or transmitter.
Table of contents
