Nexo VXT-BL515 User manual
PAGE 1 OF 1
VXT-BL515
DP1400-01 - DI
Ball Lock Pins 5x15
Self-Locking with button handle
Press button to release pin.
Stainless steel 1.4305
Temperature range from -30°C up to +150°C
Weight: 12.5 g
Dimensions:
PAGE 1 OF 2
GMT–BPADPT
DP1388-01 - DI
Sub Adapter GeoM6
Contents:
X1
X1
X1
Weight: 0.6 Kg
PAGE 2 OF 2
Dimensions:
Used with GMT-BUMPER
PAGE 1 OF 2
GMI-BNFIX
DP1387-01 - DI
Rigging Fix GeoM6
Contents:
X1
X2
X2
X4
Weight: 0.2 Kg
PAGE 2 OF 2
USED WITH GMT-BUMPER / GMT-LBUMP
Front Assembly
Rear Assembly
PAGE 1 OF 2
VNT–POLE
DP1393-01 - DI
Pole Mount Adapter GeoM6
Contents:
X1
Weight: 0.9 Kg
PAGE 2 OF 2
Dimensions:
Used with GMT-LBUMP –GMT-LBAPDT
PAGE 1 OF 2
GMT–LBUMP
DP1391-01 - DI
Light Bumper GeoM6
Contents:
X1
X4 Torx 6x20
Weight: 2.7 Kg
PAGE 2 OF 2
Dimensions:
- GMT-LBADPT / VNT-TCBRK
- GMT-LBADPT / VNT-XHBRK
- GMT-LBADPT / VNT-POLE
- VNI-WS15
Use only the provided screws (6x20). Risk of
damage the cabinet with too long screw.
Apply Loctite243 on the screw before.
PAGE 1 OF 2
GMT–LBPADPT
DP1392-01 - DI
Light Bumper Adapter GeoM6
Contents:
X1
X2
X2
X4
Weight: 1.6 Kg
PAGE 2 OF 2
Dimensions:
USED WITH GMT-LBUMP + VNT-TCBRK / VNT-XHBRK / VNT-POLE
PAGE 1 OF 2
GMI-IPCOV
DP1399-01 - DI
IPCOV GeoM6
Contents:
X1
X4
Weight: 0.3 Kg
PAGE 2 OF 2
Dimensions:
Remove the 4 screws (T25)
Positioning the Connector –Pass the cable in the
plastic Ring –Fix with the 4 new screws.
PAGE 1 OF 1
GMT-FLG
DP1386-01 - DI
Flange 120° GeoM620
Contents:
X1
X4
Weight: 0.2 Kg
Remove the grid (T15)
Remove 4 screw - Positioning the flange -
Reassembly the grid
PAGE 1 OF 2
GMT–EXBAR
DP1390-01 - DI
Extension Bar for GeoM6
Contents:
X1
X2
X2
Weight: 1.9 Kg
PAGE 2 OF 2
Dimensions:
Warning: Positioning only with “B” – “D” on GMT-BUMPER
Down Tilt
Up Tilt
PAGE 1 OF 2
GMT–BUMPER
DP1389-01 - DI
Bumper GeoM6
Contents:
X1
Weight: 3.5 Kg
PAGE 2 OF 2
Dimensions:
Used Stacked
Used Flowned
PAGE 1 OF 3
GMT-6CASE
DP1443-02 - DI
Flight case 6x GeoM6-Bumper
Weight: 57 kg / 125.7 lb
PAGE 2 OF 3
Dimensions:
Rigging Location:
- 2 spaces for EXBAR.
- 2 spaces for LBUMP/BUMPER.
- 2 spaces for VNT-POLE.
- 2 spaces for BPADPT-2.
- Space for other accessories (TCBRK –BL515 –LBPADPT –… ).
