Next 866945 User manual

1 of 9 P5--MK 52
866945 LOFT CUBBY SET
ASSEMBLY INSTRUCTIONS.
IMPORTANT - RETAIN FOR FUTURE REFERENCE - READ CAREFULLY.
IMPORTANT
• We suggest you spend a short time reading through this leaflet and then follow the simple
step by step instructions.
• Carefully check that you have all parts before beginning assembly.
• Keep fittings out of children's reach and keep children well away from the construction area.
• We recommend that the packaging is used to protect the surfaces during assembly.
• A minimum of 2 persons is required to assemble this product.
Helpline
If you have any problems with this
product or require any replacement
fittings please contact Customer
Services Tel: [phone]
Regrettably self assembly items cannot be returned once assembly is part or fully completed
unless the item is found to be faulty. Should you need to return the unassembled product,
please repack in the original packaging.
• For general cleaning, periodically dust with a soft cloth.
• Do not rub or scrub the surface when cleaning.
• Always use a non-silicone based furniture polish. Silicone in furniture polishes can break down
the lacquer finish.
• Any spills should be removed immediately with a soft clean damp cloth and dried immediately.
Avoid keeping furniturein direct sunlight or closeto any heat sources as this can cause cracking,
discolouration or warping.
• Never drag pieces of furniture across the floor as this will cause damage to the joints.
All assembly fixings should always be tightened properly and periodically check all fixings and
tighten if necessary.
• The finish will mellow and change colour over time.
CARE INSTRUCTIONS
PRODUCT INFORMATION
Tools Needed
Made in Poland.

2 PERSON ASSEMBLY
ASSEMBLED DIMENSIONS
APPROXIMATE ASSEMBLY TIME
REQUIRED ASSEMBLY TOOLS
OPTION “B”
OPTION “A”
REQUIRED ASSEMBLY SPACE
FLOOR AREA
1.5 M x 1.5 M
1 hr
DESCRIPTION:
Assembly
Instruction
866945 LOFT CUBBY SET
2 of 9 P5--MK 52
975mm
200 mm
285 mm
++
--
++
--
++
--
++
--
++
--
++
--
++
--
++
--

DESCRIPTION:
PARTS LIST
(1) TOP, BOTTOM PANEL 4
(2) SIDE PANEL 4
(3) VERTICAL DIVIDER 4
(4) BACK PANEL 2
(5) VERTICAL SLAT 4
NO PART LIST QTY
.
Assembly
Instruction
3 of 9 P5--MK 52
1
1
1
1
2
2
2
2
3
3
3
3
3
3
4
4
5
5
5
5
866945 LOFT CUBBY SET
CODE
++
--
++
--
++
--
++
--

HARDWARE LIST
DO NOT MIX CONTENT OF HARDWARE BOXES
DESCRIPTION:
10 20 30 40 50 60 70 80 90 100 mm
24x 4x
CAM BOLT SUSPENSION RING
A
++
24x
CAM LOCK
48x
8x28mm
DOWEL
B
BAG 1 BAG 1 BAG 1
BAG 1
CD
8x
3,0x20mm
SCREW
F
BAG 1
12x
PLASTIC
SUPPORT
BAG 1
G
Assembly
Instruction
4 of 9 P5--MK 52
866945 LOFT CUBBY SET
H
24x
Ø15mm
CAM COVER
BAG 1

Top Tips before you start!
1. Please check that all parts are present before you start the assembly of your furniture,
as once assembled, the furniture is exempt from our home approval policy.
2. For ease and speed of assembly, we recommend that before you commence each step
of the assembly, that you identify all the parts required for that step.
3. For larger items, please ensure that you have sufficient space and people (as indicated
on page 1) to assemble your product safely.
4. We recommend that, where possible, all items are assembled near to the area in which
they will be placed in use, to avoid moving the product unnecessarily once assembled.
5. For the protection of your furniture, particularly items of high gloss finish, we recommend
that the product is placed on aprotected surface during assembly to prevent any damage.
6. During assembly please take care not to over-tighten any fittings, as this may damage
the product .
Care and Maintenance of your Furniture
Please periodically check all fittings and re-tighten as necessary.
Please do not jump on your furniture.
To clean your item, please use adamp cloth and wipe clean.
Never allow any kind of liquid to remain on your furniture. Absorption can cause wood to
warp or finishes to de-laminate.
DESCRIPTION:
Assembly
Instruction
5 of 9 P5--MK 52
866945 LOFT CUBBY SET

DESCRIPTION:
SCREW IN CAM SCREWS
ONLY DOWN TO FIRST RING.
FLUSH
WITH
PANEL
1
PRESS PANELS TOGETHER ALIGNING
DOWEL WITH HOLES, CAM SCREWS WITH LOCKS.
3
TO SECURE PANELS,
TURN CAM LOCKS 1/2 TURN CLOCKWISE.
4
CAM SHOWN IN
LOCKED POSITION.
++
++
PRESS IN CAM LOCKS. ARROW ON CAM
LOCK MUST FACE HOLE IN PANEL EDGE.
DO NOT INSERT DOWELS
IN CAM SCREW / LOCK HOLES.
2
++
++
Assembly
Instruction
6 of 9 P5--MK 52
866945 LOFT CUBBY SET

5
DESCRIPTION:
24x
C
Assembly
Instruction
48x
A
++
24x
B
A
B
++
1
7 of 9 P5--MK 52
C
1
FRONT
BACK
++
++
++
++
3
FRONT
++
++
x4
x4
x4
2
FRONT
x4
2
866945 LOFT CUBBY SET
++
++
1/2 TURN
CLOCKWISE.
++
++
++
++
++
++
++
++
++
4
1
1
5
5
3
3
DO THIS STEP TWICE (2x)

DESCRIPTION:
Assembly
Instruction
3
4
8 of 9 P5--MK 52
++
++
++
++
++
++
1
1
2
2
DO THIS STEP TWICE (2x)
++
++
1/2 TURN
CLOCKWISE.
866945 LOFT CUBBY SET
++
H
++
H
H
24x
12x
8x
F
E
4
4
F
E
DO THIS STEP TWICE (2x)

DESCRIPTION:
Assembly
Instruction
5
6
9 of 9 P5--MK 52
22
33
11
++
++
++
--
++
--
++
--
++
--
++
--
-
-
OPTION “B”
OPTION “A”
Wall fixings are not supplied with this product as different wall materials require different
types of fixing devices( such as Rawl plugs used on brick work).You must use fixing
devices suitable for the type of wall you intend to mount this product to.
Please ensure that the head of any screw used has a diameter greater than the diameter
of the mounting hole on the product and that the fixing is safe and secure before use.
NOT SUPPLIED___
NOT SUPPLIED___
*
*
*
866945 LOFT CUBBY SET
DO THIS STEP TWICE (2x)
4x
D
OPTION “B”
OPTION “A”
D
++
--
++
--
++
--
++
--