Next CORSICA 132943 User manual

Tools Needed
Helpline
If you have any problems with this product or require
any replacement fittings please contact Customer
Services Tel: [phone]
by-step instructions.
IMPORTANT - RETAIN FOR FUTURE REFERENCE - READ CAREFULLY.
ASSEMBLY INSTRUCTIONS.
Regrettably self assembly items cannot be returned once assembly is part or fully completed unless the item is found
to be faulty. Should you need to return the unassembled product, please repack in the original packaging.
IMPORTANT
• We suggest you spend a short time reading through this leaflet and then follow the simple step-
• Carefully check that you have all parts before beginning assembly.
132943 CORSICA CONSOLE BOOKCASE
• Wall fixings are not included.
PRODUCT INFORMATION
• Made from hollow board, honeycomb board,particle board & MDF with a wood effect finish.
CARE INSTRUCTIONS
• Made in China
• Avoid keeping furniture in direct sunlight or close to any heat sources as this can cause cracking, discolouration or
warping.
• Never drag pieces of furniture across the floor as this will cause damage to the joints.
• For general cleaning, periodically dust with a soft cloth.
• Do not use furniture polish.
• Any spills should be removed immediately with a soft clean damp cloth and dried immediately.
• All assembly fixings should always be tightened properly and periodically check all fixings and tighten if necessary.
• Ensure the product is protected with mats and coasters when items are placed on the surfaces, to prevent scratching
or damage.
• Keep fittings out of children's reach and keep children well away from the construction area.
• We recommend that the packaging is used to protect the surfaces during assembly.
• A minimum of two persons is required to assemble this product.
• Do not put hot dishes directly on the surfaces of the item.
• Do not rub or scrub the surface when cleaning.
• We recommend the use of the wall attachment bracket/strap provided for safety reasons.
Page 1 of 10

PARTS
FITTINGS
1.Attach panels 17,18 & 21 to panel 19 with 6 x screws
(H) and tighten with a screwdriver.
STEP ONE
Page 2 of 10

1.Slide panel 20 into the grooves of the drawer
frame.
1.Insert 3 × cambolts (E) into panel 22 using a
screwdriver until tight.
2.Glue and insert 5 x wooden dowels (B) into panels
17,18 & 21
3.Attach panel 22 to the assembled drawer frame.
4.Insert 3 x camlocks (F) into panels 17,18 & 21 and
tighten with a screwdriver.
Ensuring the arrow indicator is pointing towards the
panel edge before tightening with a screwdriver.
STEP TWO
STEP THREE
5.Attach handle (K) to the panel 22 with screws
provided.
6.Repeat step one,two & three to assemble the
other drawer .
1.Insert 2 ×cambolts (E) into panel 1 using a
screwdriver until tight.
2.Glue and insert 2 x wooden dowels (A) into panel 9
3.Attach panel 9 to panel 1.
4.Insert 2 x camlocks (F) into panel 9 and tighten with a
screwdriver.
Ensuring the arrow indicator is pointing towards the
panel edge before tightening with a screwdriver.
STEP FOUR
Page 3 of 10

1.Attach panel 2 to panel 9 with 2 × screws (G)
and tighten with an Allen key (D).
1.Insert 2 × cambolts (E) into panel 2 using a
screwdriver until tight.
STEP FIVE
STEP SIX
1.Glue and insert 1 x wooden dowel (A) into panel 8
2.Attach panel 8 to panel 2.
3.Insert 2 x camlocks (F) into panel 8 and tighten with a
screwdriver.
Ensuring the arrow indicator is pointing towards the
panel edge before tightening with a screwdriver.
STEP SEVEN
Page 4 of 10

1.Attach panel 3 to panel 8 with 2 × screws (G)
and tighten with an Allen key (D).
1.Insert 2 × cambolts (E) into panel 3 using a
screwdriver until tight.
STEP EIGHT
STEP NINE
1.Glue and insert 1 x wooden dowel (A) into panel 16
2.Attach panel 16 to panel 3.
3.Insert 2 x camlocks (F) into panel 16 and tighten with
a screwdriver.
Ensuring the arrow indicator is pointing towards the
panel edge before tightening with a screwdriver.
STEP TEN
Page 5 of 10

1.Insert 12 × cambolts (E) into panels 5 & 4 using a
screwdriver until tight.
1.Glue and insert 6 x wooden dowels (A) into panels 1 ,
2 & 3
2.Attach panels 4 & 5 to panels 1 & 2,3.
3.Insert 12 x camlocks (F) into panels 1 , 2 & 3 and
tighten with a screwdriver.
Ensuring the arrow indicator is pointing towards the
panel edge before tightening with a screwdriver.
STEP ELEVEN
STEP TWELVE
1.Slide panels 11 & 12 into the grooves of the panels 2
& 3
Please note :We recommend that the
packaging is used to protect the
surfaces during assembly.
STEP THIRTEEN
Page 6 of 10

1.Slide panels 15 (x2) into the grooves of the unit
2.Slide panels 13 (x2) into the grooves of the unit
1.Slide panel 7 to panels 13 & 15 as shown in diagram
STEP FOURTEEN
STEP FIFTEEN
1.Fix panel 7 to panels 1, 2 & 3 with 6 × screws (G)
and tighten with an Allen key (D).
2.Slide panel 14 into the grooves of the unit
STEP SIXTEEN
Page 7 of 10

1.Slide panel 6 to panels 13 & 15 as shown in diagram
1.Fix panel 6 to panels 1, 2 & 3 with 6 × screws (G)
and tighten with an Allen key (D).
STEP EIGHTEEN
STEP SEVENTEEN
1.Carefully turn & lift the unit ,the unit should be lifted
by two people .
2.Insert 8 x fittings (I) into required positions of panels
4,5,6 & 7,9.
3.Insert adjustable panels 10 (x2) onto the fittings (I).
STEP NINETEEN
Page 8 of 10

1.Use 2 x stickers (J) to cover the camlock holes
2.Insert the drawers to the assembled unit as shown in
diagram.
Note: If you want to disassembled the unit,
please follow the steps as the right
brief to push the drawer out.
STEP TWENTY
1.Secure 14 × plastic fasteners (M) with screws
provided on back panel.
STEP TWENTY ONE
Page 9 of 10

1.Using screw and washer secure the
2 X nylon straps (L) to the back of top panel .
2.Secure the other end of the strap to the
wall with an appropriate screw and wall
plug for your wall type (not provided).
To hide the strap behind the unit, drill the
hole lower than the top of the unit.
Warning:
Always ensure intended wall area to
be drilled is free from hidden electrical
wires, water and gas pipes.
NB:Wall fixings are not included - please
source suitable fixing for your wall type.
If in doubt please consult a qualified
trades person.
If in doubt please consult a qualified
trades person.
STEP TWENTY TWO
Next Retail Ltd,Desford Road,Enderby,Leicester,LE19 4AT
Page 10 of 10