Next HAVANA 892301 User manual

Tools Needed
Helpline
If you have any problems with this product or require
any replacement fittings plase contact Customer
Services Tel: [phone]
• We suggest you retain these instructions for future reference.
• BS7449: 1991
Country of Origin: Indonesia
CARE INSTRUCTIONS
ASSEMBLY INSTRUCTIONS.
IMPORTANT - RETAIN FOR FUTURE REFERENCE - READ CAREFULLY.
• Carefully check that you have all parts before beginning assembly.
• Keep fittings out of children's reach and keep children well away from the construction area.
IMPORTANT
• We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step instructions.
• We recommend that the packaging is used to protect the surfaces during assembly.
• Please use suitable wall fixings for your wall type. Wall fixings are not included.
If a glass component is chipped or broken replace with glass of the type describe on this label.
Consult with the retailer with regard to obtaining a manufacturing specification and shape for replacement glass quoting the
• Always ensure intended wall area to be drilled is free from any hidden electrical wires, water and gas pipes.
Name and Address: Next Retail Ltd, Desford Road, Enderby, Leicester, LE19 4AT
Identification and model Number: HAVANA MIRROR
Date of Manufacture: 07/2013
Contract number:
Nominal thickness of Glass: 4 mm
model number, batch number and date of manufacture.
• Not suitable for use in bathrooms.
• Do not strike the glass with hard or pointed items.
• Do not place very hot or cold items against or in close proximity to glass surface.
• When cleaning mirror glass, use a damp cloth or leather with washing-up liquid or a recommended mirror-cleaning product.
• Do not use washing powders or any other substance containing abrasive since these substances scratch the glass.
• Do not sit or stand upon horizontal glass surfaces.
• Please use suitable wall fixings for your wall type. Wall fixings are not included.
892301 HAVANA MIRROR
1
LANDSCAPE
PORTRAIT
1
1
1 of 4

WARNING
NB SCREWS & WALL PLUGS ARE NOT INCLUDED
Mirror
PARTS
Ax1
FITTINGS
PRODUCT INFORMATION
1x1
If you need to return this mirror, please use the packaging provided.
TEMPLATE
At least 2 people are recommended to install the mirror.
Mirrors are heavy objects and your safety is dependant on the construction/strenght of the wall to which it is attached.
We would recommend that the following methods be used to hang the mirror.
We strongly recommend that a professional who has experience of fitting such items should install this mirrors.
• Made from particleboard, MDF with a wood effect finish and glass mirror.
1
LANDSCAPE
PORTRAIT
1
1
2 of 4

STEP ONE
- Use the template provided to mark on the wall for the position
the fixings.
of the fixings
NB place the template over the back of the mirror to ensure
that the holes match the position of the hooks before
drilling into your wall.
- Use a spirit level to check that the fixings are level.
STEP TWO
mirror.
STEP THREE
- Drill two holes and insert an appropriate wall plug into each
hole.
Insert the screws and tighten, leaving the screw head exposed
by 1/4 inch (6mm).
Warning :
Always ensure intended wall area to be drilled is free
from hidden electrical wires, water and gas pipes.
STEP FOUR
- Lift the mirror into position ensuring that the fixings attached to
the mirror are firmly hooked over the screw heads.
- Check the mirror periodically to ensure that no fitting has
loosened and needs attention.
NB All fixing techniques rely, for their security, on the
strength of the wall and screws/special fittings.
Seek professional advice to guide you as to where the
mirror can be safely installed and which wall fittings /
screws are appropriate.
- Before drilling into the wall, check that the fixing positions are the same distance apart as the two fixings attached to the
1
LANDSCAPE
PORTRAIT
1
1
3 of 4

PACKAGING LAYOUT
Next Retail Ltd, Desford Road, Leicester, LE19 4AT
1
LANDSCAPE
PORTRAIT
1
1
4 of 4