0.5 hour
not supplied
PH
bleach or damage the product.
679714-2014-V1
Produced in China for Next Retail Ltd.
679714
IDAHO MIRROR
To View our full furniture range please visit www.next.co.uk
scratching.
This product should only be used on firm level walls.
Always ensure intended wall area to be drilled is free from
any hidden electrical wires, water and gas pipes.
Please use suitable wall fixings for your wall type.
LE19 4AT
Leicester,
Desford Road,
Next Retail Ltd,
Home Customer Services
You can write to us at
Wall fixings are not included.
Not suitable for use in bathrooms.
BS7449:1991
Name and address: Next Retail Ltd. LE19 4AT
Nominal thickness of glass: 4mm, Annealed glass does not
the product where possible and recommend further action.
an independant home service technician to review and repair
If you have had the product for more than 28 days we will send
home to assess the fault and repair the product where possible.
refund or for a fully trained home service technician to visit your
product for 28 days or less you may be offered a replacement,
to you free of charge.
Tools required
Time to assemble
and they will be happy to arrange for a replacement to be sent
Two persons are required to assemble this item.
Number of people required to assemble
0333 777 8999
please contact our customer service team on
If you are missing any fixtures and fittings for your product
Missing parts
Never use scourers, abrasives or chemical cleaners.
BEFORE YOU START
Assembly instructions
worn.
Do not use this product if parts are missing, damaged or
Do not tilt or stand on the product.
Do not overtighten screws or bolts.
Don’ts
If you have had the
0333 777 8999.
customer service team on
If you have a fault with your product please contact our
Home service technicians
conform to BS6206. If a glass component is chipped or
broken replace with glass of the type described on the label
at the back of product.
Warnings
Important: Retain these instructions for future reference.
Keep fittings out of children’s reach and keep children we;
away from the construction area.
Unwrap all packaging materials and place the components
on top of the carton box or on a clean floor to prevent it from
Do’s
We suggest you spend a short time reading through this
leaflet before you start.
When you are ready to start, make sure that you have the
right tools, plenty of space and a clean, dry area for
assembly.
Check the pack and make sure you have all the parts listed.
Ensure that this product is fully assembled as illustrated
before use.
Check all screws or bolts are tightened and inspect regularly.
To clean wipe with a sponge and warm soapy water. Do not
use solvent based cleaners or detergents as they can
not supplied
1
