Next ALIX User manual

We’re confident you’ll love your gorgeous new Next
furniture. However, it’s worth making absolutely certain
before you put it all together.
So, let’s quickly run through these three steps:
TIPS FOR RETURNS
Not completely happy with the product? No problem.
We just need everything back in the original packaging, so follow the steps below
and this will ensure a super-smooth returns process and no delay to your refund.
1. COLOUR
Make sure you’re happy with the colour
No need to unpack everything, just check the first component.
2. PROTECTIVE PACKAGING
If you’re happy, then it’s time to get opening! Start by laying everything out
on the protective packaging – this will prevent anything getting scratched.
3. PARTS PAGE
Finally, double check you have all the pieces by referencing
the parts page of the instructions.
•Check everything is there (the ‘parts page’
is a handy checklist).
•Pop all the loose fittings and fixtures into
the packaging provided or tie them up in a
plastic bag.
•Wrap all the big components back
up in the original protective packaging.
•Close up the box and seal it securely
(don’t be afraid to use plenty of tape).
DO DON’T
•Leave anything assembled -
all components should be dismantled
and separately packed.
•Put loose fixtures and fittings straight
into the box.
•Throw it back in the box carelessly –
as it may get damaged.
Then just give us a call on 0333 777 8999 and we’ll sort out a pick up time for you.
BEFORE YOU GET
STARTED...

A19049 M80761 T39388-2021-V1
Produced in China for Next Retail Ltd.
IMPORTANT- RETAIN FOR FUTURE REFERENCE
ALIX BED-TODDLER
A19049 M80761 T39388
Assembly instructions
Actual product size
Need Help?
With: Assembly instructions
Missing or damaged parts
CALL: 0333 777 8999
TODDLER: W79.6 x L146 x H80cm

Produced in China for Next Retail Ltd.
ALIX BED-TODDLER
Assembly instructions
1
A19049 M80761 T39388
A19049 M80761 T39388-2021-V1
BEFORE YOU START
30 min
not supplied
PH2
not supplied
To View our full furniture range please visit www.next.co.uk
You can write to us at
Home Customer Services
Next Retail Ltd,
Desford Road,
Leicester,
LE19 4AT
Home service technicians
If you have a fault with your product please contact our customer service
team on 0333 777 8999. If you have had the product for 28 days or less
you may be offered a repla cement, refund or for a fully trained home
service technician to visit your home to assess the fault and repair the
product where possible.If you have had the product for more than 28
days we will send an independant home service technician to review and
repair the product where possible and recommend further action.
Missing parts
If you are missing any fixtures and fittings for your product please
contact our customer service team on 0333 777 8999 and they will be
happy to arrange for a repla cement to be sent to you free of charge.
Tools required
Time to assemble
Number of people required to assemble
Two persons are required to assemble this item.
IMPORTANT - RETAIN FOR FUTURE
REFERENCE - READ CAREFULLY.
This child’s bed conforms to BS8509:
2008 + A1:2011
WARNINGS
WARNING: Do not place this child’s bed near heat sources,
windows and other furniture
WARNING: Do not use this child’s bed if any part is broken,
torn or missing
WARNING: Assembly by adult only
WARNING: Once assembled this bed is not designed to be
disassembled and reassembled
Children are likely to play, bounce, jump and climb on beds,
therefore the child’s bed should not be placed too close to other
furniture or windows, blind cords, curtain pulls or other strings or
cords and should be placed either tight to any wall or have a gap
of 300mm between the wall and the side of the bed
This size of the mattress to be used with the child’s bed is
700mm x 1400mm
Do’s
When you are ready to start, make sure that you have the
right tools and plenty of space
Due to the size of the product we recommend that it is
assembled in the room intended for use
Unwrap all packaging materials and place the components
on a clean surface to protect it from damage,
We recommend that the packaging is used to protect the
surfaces during assembly
Carefully check that you have all the parts before beginning
assembly
Please periodically check all fittings and re-tighten as necessary
To clean your item, wipe with soft cloth slightly dampened with
water. Then buff with a dry clean cloth
Routinely check that the fittings are secure and tighten any
fittings using the appropriate tools
If any parts are missing please contact Next to obtain replace-
ments. Under no circumstances should missing parts or hard
ware be substituted unless obtained from Next
Don’ts
Do not drag or pull your furniture
Do not use silicone based furniture polish. Silicone in furniture
polishes can break down the lacquer finish
Do not stand or jump on this product

Produced in China for Next Retail Ltd.
ALIX BED-TODDLER
Assembly instructions
2
GETTING TO KNOW YOUR PRODUCT
1
4
2
8
7
3
A19049 M80761 T39388-2021-V1
A19049 M80761 T39388
6
5
7
7
7

Produced in China for Next Retail Ltd.
ALIX BED-TODDLER
Assembly instructions
3
Components supplied. Please use this guide if you require replacement parts.
Qty
VisualDimensions CtnRef
80x60cm
142x16cm
1
2
1 1
4
1
1
2
2
Qty
VisualDimensions CtnRef
71x20cm
71x20cm
5
61
1
7
1 1
4 1
3
80x40cm 11142x71cm
11
20x5cm
A19049 M80761 T39388
A19049 M80761 T39388-2021-V1
8
142x16cm

Produced in China for Next Retail Ltd.
ALIX BED-TODDLER
Assembly instructions
4
* Extra Fittings included
in case of loss or damage
100908070605040302010mm
Fixtures and fittings
supplied (actual size)
DimensionsRef Quantity
24
4
4
10
4
6
2
1
1
2
1
1
M6 x 28mm
F
E
D
C
35 x 15mmA
B
* Extra
Fittings
ø8 x 62mm
ø8 x 30mm
M8 x 34mm
M8 x 24mm
Fixtures and fittings supplied (not to scale)
Ref Dimensions Visual Qty
M6
M5
ø30mm
M8
M8
225x70x32mm 4
30
30
4
2
2
G
H
J
K
L
M
A19049 M80761 T39388
A19049 M80761 T39388-2021-V1
* Extra
Fittings
0
0
0
1
2
2
N
2 0M4

Produced in China for Next Retail Ltd.
ALIX BED-TODDLER
Assembly instructions
5
1
42
M8 x 24mm
F x 8 H x 8
1
A19049 M80761 T39388-2021-V1
A19049 M80761 T39388
J x 8
G x 4 N x 4
M8 M8
225x70x32mm ø30mm
N
F
H
J
L
7 x 4 7 x 4
B
Shoulder
NO GAP
l e n a Pl e n a P
Tighten until shoulder is flush
with panel. Do not overtighten
or undertighten (see example below)
CAM BOLT
PH2 8 x 62mm
B x 4
G
4

Produced in China for Next Retail Ltd.
ALIX BED-TODDLER
Assembly instructions
6
3
4
3
A19049 M80761 T39388
A19049 M80761 T39388-2021-V1
2
35x 15mm
A x 4
A
K
B
3
1
4
2
A

Produced in China for Next Retail Ltd.
ALIX BED-TODDLER
Assembly instructions
7
5
6
A19049 M80761 T39388-2021-V1
A19049 M80761 T39388
F
M8 x 24mm
F x 16 H x 16 J x 16
M8 M8
H
J
5
6
M8 x 34mm
E x 6 H x 6 J x 6
M8 M8
D x 4 ø8 x 30mm
EHJ
L
L
D

Produced in China for Next Retail Ltd.
ALIX BED-TODDLER
Assembly instructions
8
7
8
A19049 M80761 T39388
A19049 M80761 T39388-2021-V1
C x 10
M6 x 28mm
C
M
8

Produced in China for Next Retail Ltd.
ALIX BED-TODDLER
Assembly instructions
TODDLER: W79.6 x L146 x H80cm
Actual product size
A19049 M80761 T39388
A19049 M80761 T39388-2021-V1
146cm
79.6cm
80cm
20cm
60cm