Next MAISIE 866463 User manual

Tools Needed
Helpline
If you have any problems with this product or require
any replacement fittings please contact Customer
Services Tel: [phone]
• Wall fixings are not included.
• Avoid keeping furniture in direct sunlight or close to any heat sources as this can cause cracking, discolouration or
warping.
• Any spills should be removed immediately with a soft clean damp cloth and dried immediately.
• Do not put hot dishes directly on the surfaces of the item.
• All assembly fixings should always be tightened properly and periodically check all fixings and tighten if necessary.
• Never drag pieces of furniture across the floor as this will cause damage to the joints.
• Please do not apply Adhesive substrates for example, sticky tape to the product.
• Ensure the product is protected with mats and coasters when items are placed on the surfaces, to prevent scratching
or damage.
• Do not use furniture polish.
• Do not rub or scrub the surface when cleaning.
• For general cleaning, periodically dust with a soft cloth.
CARE INSTRUCTIONS
PRODUCT INFORMATION
• We recommend the use of the wall attachment bracket/strap provided for safety reasons.
• Made from hollow board & partical board with a wood effect finish.
• Made in China.
• A minimum of two persons is required to assemble this product.
• We recommend that the packaging is used to protect the surfaces during assembly.
• Keep fittings out of children's reach and keep children well away from the construction area.
ASSEMBLY INSTRUCTIONS.
Regrettably self assembly items cannot be returned once assembly is part or fully completed unless the item is found to
be faulty. Should you need to return the unassembled product, please repack in the original packaging.
IMPORTANT
• Carefully check that you have all parts before beginning assembly.
• We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step instructions.
IMPORTANT - RETAIN FOR FUTURE REFERENCE - READ CAREFULLY.
866463 MAISIE BOOKCASE
866463 MAISIE BOOKCASE866463 MAISIE BOOKCASE
866463 MAISIE BOOKCASE
Page 1 of 5

1. Attach panel 6 to panel 5 with 5 x screws(F) and
tighten by an Allen key (E).
2. Attach panel 4 to panel 3 with 5 x screws(F) and
tighten by an Allen key (E).
FITTINGS
STEP ONE
PARTS
Page 2 of 5

1. Insert 13 x cambolts (D) into panels 3, 4, 5, 6 & 9,
and tighten with a screwdriver.
1. Glue and insert 4 x wooden dowels (A) into panel 2
and attach panels 8 & 9 to panel 2.
2. Insert 3 x camlocks (C) into panel 2 and tighten
with a screwdriver.
Ensuring the arrow indicator is pointing towards the
panel edge before tightening with a screwdriver.
1. Glue and insert 4 x wooden dowels (A) into panels
2 & 7 and attach panels 2 & 7 to panel 3.
2. Insert 5 x camlocks (C) into panels 2, 7, 8 & 9 and
tighten with a screwdriver.
Ensuring the arrow indicator is pointing towards the
panel edge before tightening with a screwdriver.
STEP TWO
STEP THREE
STEP FOUR
Page 3 of 5

1. Glue and insert 4 x wooden dowels (A) into panels
2 & 7 and attach panel 5 to panels 2 & 7.
2. Insert 5 x camlocks (C) into panels 2 & 7, and
tighten with a screwdriver.
Ensuring the arrow indicator is pointing towards the
panel edge before tightening with a screwdriver.
1. Carefully lift the unit upright, the unit should be
lifted by two people.
2.Slide panel 11 into the assembled frame.
1. Insert 4 x cambolts (D) into panel 1, and tighten
with a screwdriver.
2. Glue and insert 4 x wooden dowels (A) into panels
3 & 5 and attach panel 1 to panels 3 & 5.
3. Insert 4 x camlocks (C) into panels 3 & 5 and
tighten with a screwdriver.
Ensuring the arrow indicator is pointing towards the
panel edge before tightening with a screwdriver.
STEP SIX
STEP FIVE
STEP SEVEN
Page 4 of 5

1. Insert 12 x fittings (G) into the required position of
panels 3 & 5.
2. Insert panels 10 (x3) onto the fittings (G).
3. Use 4 x stickers (H) to cover the holes on panels 3
& 5.
1. Insert 8 x plastic fasteners (I) into the back panel
grooves and tighten with screws provided.
2. Use 2 x screws and 2 x washer to secure 2 x nylon
strap (J) to the back of the top panel.
3. Secure the other ends of the straps to the wall
using appropriate screws,washers (not provided) and
wall plugs for your wall type.
WARNING: Always ensure the area to be drilled is
free from hidden electrical wires,water and gas pipes.
NB:Wall fixings are not included-Please source
suitable fixing for your wall type. If in doubt please
consult a qualified trades person.
STEP NINE
Next Retail Ltd, Desford Road, Leicester, LE19 4AT
STEP EIGHT
Page 5 of 5