Next Hartford Flip Bed User manual

Need Help?
With: Assembly instructions
Missing or damaged parts
CALL: 0333 777 8999
Item number Fabric name Fabric composition
976546
782412
A07435
Wool Blend Stone
Soft Light Natural
51% Wool / 30% Viscose /
19%Polyester
100% Polyester
Wool Blend Grey

Produced in China for Next Retail Ltd 1
BEFORE YOU START
Number of people required to assemble
We recommend two people assemble this product.
Missing parts
If you are missing any fixtures and fittings for your product
please contact our customer service team on 0333 777 8999
and they will be happy to arrange for a replacement to be sent
to you free of charge.
Home service technicians
If you have a fault with your product please contact our
customer service team on 0333 777 8999. If you have had the
product for 28 days or less you may be offered a replacement,
refund or for a fully trained home service technician to visit your
home to assess the fault and repair the product where possible.
If you have had the product for more than 28 days we will send
an independant home service technician to review and repair
the product where possible and recommend further action.
You can write to us at
Home Customer Services
Next Retail Ltd,
Desford Road,
Leiceste r,
LE19 4 AT
To view our full furniture range please visit www.next.co.uk
Time to assemble
30 min.
Warnings
We suggest you retain these instructions for future reference.
Keep fittings out of children’s reach and keep children well away from
construction area.
This product should only be used on firm, level ground
Please periodically check all fittings and re-tighten as necessary.
Please do not jump or stand on your bed.
Avoid exposing the furniture to excessive heat or direct sunlight as this
can cause cracking of the wood and deterioration of the colour.
Keep away from strong heat sources.
Do not use this item if components are missing or broken
Keep fingers away from moving parts to avoid any possible injury.
Do’s
We suggest you spend a short time reading through this leaflet before
you start .
When you are ready to start, make sure that you have the right tools
and plenty of space .
Due to the size of the product we recommend that it is assembled in
the room intended for use.
Unwrap all packaging materials and place the components on a clean
surface to protect it from damage, We recommend that the packaging is
used to protect the surfaces during assembly .
Carefully check that you have all the parts before beginning assembly
Ensure the product is fully assembled as illustrated and all fixings fully
tightened before use.
Check fixings regularly to ensure they remain tight .
When adjusting the support legs, ensure that the foot is set 10mm from
the floor surface without the mattress in place. When in use the legs
will create the required support.
Always ensure that protectors are used on the legs according to your
flooring type.
Ensure that the bed is assembled as per the instructions, all fittings are
tightened and slats are secure before placing your mattress.
To clean your items, please lightly wipe with a slightly dampened cloth
For leather items dust regularly with a soft cloth, preferably once a
week, to keep the leather pores free from dust particles
For velvet items use a soft brush lightly dress the fabric. Lightly wipe
with a slightly dampened cloth to clean.
For velvet items avoid scratching the fabric as the pile may not recover
and permanently mark it.
Don’ts
Do not drag your assembled bed. Always lift the bed and check that the
centre support rail is securely fixed in place.
Apply Adhesive substrates for example, sticky tape to the product
Do not use silicone based furniture polish. Silicone in furniture
polishes can break down the lacquer finish
Never allow any kind of liquid to remain on your furniture. Absorption
can cause finishes to de-laminate and or stain
Please do not jump or stand on your bed

2
10 x 9 cm
1
1
1
1
1
17
6
5
4
3
2
1
Ref Dimension Visual Qty
GETTING TO KNOW YOUR PRODUCT
Components supplied. Please use this guide if you require replacement parts.
Ref Dimension Visual Qty
2
Produced in China for Next Retail Ltd.
1
2
3
4
5
6
9
7
8
10
2
40 x 3 cm8
6
10 x 3.5 cm9
1
10
11
4
12 x 7cm12
Double:149 x 98 cm
King:164 x 98cm
Double:147 x 24cm
King:162 x 24cm
Double:192 x 24cm
King:202 x 24cm
Double:192 x 24cm
King:202 x 24cm
Double:187x66cm
King:197x74cm
Double:187x66cm
King:197x74cm
King:182 x 141cm
Double:172 x 121cm
12
1
30 x 3 cm11
SuperKing:194 x 98cm
SuperKing:192 x 24cm
SuperKing:202 x 24cm
SuperKing:202 x 24cm
SuperKing:197x89cm
SuperKing:197x89cm
Superking 182x163cm

2
N/A
2
8 x 80mm 1
B
A8 x 25mm
G
H8 x 13mm
I
28
30
supplied (actual size)
Fixtures and fittings 10mm 20 30 40 50 60 70 80 90 100 110 120 130
Ref Dimension Spare
Qty
6 x 11mm 2
20
J4 x 60mm N/A
2
K5 x 60mm N/A
2
L
3
Produced in China for Next Retail Ltd.
N/A
6 x 60mm 6
C
N/A
8 x 13mm 1
D
N/A
6 x 11mm 6
E
N/A
6 x 15mm 8
F
M
11 x 60mm N/A
1
13 x 60mm N/A
1
N/A
6 x 40mm 8
N3 x 40mm N/A
4

4
Produced in China for Next Retail Ltd.
1
2
1
2
12
N
N x 4
12
A x 8
H x 8
K x 1
8 x 25mm

8 x 25mm

B x 1
H x 2
K x 1
M x 1
5
6
6
Produced in China for Next Retail Ltd.
5
6
E x 1

7
Produced in China for Next Retail Ltd.
7
8
7
7
D x 8
I x 8
J x 2
8
8
G x 8

8
Produced in China for Next Retail Ltd.
9
10
L x 1
C x 6
I x 12
J x 1
F x 6
L x 1 11

Produced in China for Next Retail Ltd. 9
CAUTION: Flip beds use strong gas pistons to aid you in lifting the mattress to access your
storage. Do not attempt to operate the mechanism without a mattress in place. This could
cause damage to the frame or potential injury when opening or closing. Use the strap or
handle provided to operate and keep hands and objects away from any of the moving
components.
Minimum and maximum weight restrictions are highlighted below. Ensure your mattress
meets this specification. Do not overload the bed frame as this will damage the mechanism.
Double: MIN 20kg / MAX 60kg
King: MIN 25kg / MAX 70kg
Superking: MIN 30kg / MAX 85kg
120