Next OXFORD 362364 User manual

Tools Needed
All you need to assemble this piece of
furniture is a flat and crosshead screwdriver
as well as a hammer
(Not supplied)
Helpline
If you have any problems with this product or
require any replacement fittings please contact
Customer Services Tel: [phone]
Regrettably self assembly items cannot be returned once assembly is part or fully completed unless the items
are found to be faulty. Should you need to return the unassembled product, please repack in its original
packaging.
We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step•
instructions.
Carefully check that you have all the parts before beginning assembly.•Keep fittings out of children’s reach and keep children well away from construction area.•We suggest you retain these instructions for future reference.•We recommend that the packaging is used to protect the surfaces during assembly.•A minimum of 1 person is required to assemble this product.•
Assembly Instructions
Please keep these instructions for future reference
Made with solid oak and oak veneer with a clear lacquer finish.•Natural features ensure that each piece is individual. Every effort is made to ensure colour continuity between•
pieces, however this is a natural product, slight colour variations and natural grain markings may occur.
Oak wood and veneers often have random pale markings in the grain, these are medullary rays which are a•
natural unique feature of this wood
Made in China.•
1 of 8
362364 OXFORD BEDSIDE
Important
Product Information

Avoid exposing the furniture to excessive heat or direct sunlight as this can cause cracking•
of the wood and deterioration of the colour.
Periodically dust lightly with a soft cloth.•Any spills should be removed immediately with a damp cloth.•Do not use silicone based furniture polish.•Ensure that the product is protected with mats & coasters when items are placed on to its surface.•
Never put hot dishes directly onto wooden or glass surfaces as this may mark the furniture.
Wood will mellow and change colour over time, we recommend that ornaments and items placed on•
the surface are moved regularly for the first few months to prevent uneven mellowing.
Take care when moving the furniture and never drag the pieces across the floor, as this will cause•
damage to the joints.
Periodically check fittings are secure and re-tighten as necessary.•
2 of 8
A x 22
8x30 B x 5 6x44 C x 24 D x 17 15x12 F x 18
G x 3 H x 3 J x 3 3.5x12
K x 3 L x 18 M x 18
N x 3 P x 6
L=350
4x30
3x16
L=350 L=350 L=350 6x9
M4x18 Q x 12
6x41 E x 1 7x50
R x 1
4mm S x 12 15x12142mm
Care Instructions
Fittings

1
2
3
8
9
10
11
12
13
6
4
44
7
5
x 3
3 of 8
PACK PANELS LIST
1 - 1 1 x 1
2x 1
3
4
5
6
7
8
10
11
12
13
x 1
x 3
x 1
x 1
x 1
x 1
x 3
x 3
x 3
x 3
9
Parts

Gx3
Hx3
Lx18
7
4 of 8
2
G
G
G
LLL
6
3HHH
LLL
4x3
5
3
2
44
4
5
6
7
(Assemble on a flat and even surface)
Insert cam bolts (C) into panels (2)•
and (3), tighten with a screwdriver.
Insert dowels (A) into panels•
(2) and (3) with a hammer.
Install runners (H) and (G) to•
panels (2) and (3), and tighten
with screws (L).
Insert dowels (A) into panels (4), (5),•
(6) and (7) with a hammer.
Attach panels (2) and (3) to panels•
(4),(5),(6) and (7), insert cam locks (D)
into panels (4),(5),(6) and (7), tighten
with a screwdriver.
Ax12
L
Dx12
Cx12
Ax4
Step One
Step Two
Step Three

1
3
2
6
4
5 of 8
8
3
1
1
36mm
23mm
Insert cam bolts (B) into panel (1),•
tighten with a screwdriver.
Attach panel (1) to panels•
(2),(3) and (6), insert cam locks
(D) into panels (2),(3) and (6),
tighten with a screwdriver.
Fix panel (1) to panel (4),•
tighten with screw (E) using
allen key (R).
Attach back panel (8) to the body•
of the bedside, and tighten with
screws (F).
Bx5
Dx5
Ex1
Fx18
Rx1
Step Four
Step Five
Step Six

6 of 8
9
10
Ax2
11
10
11
9
Insert cam bolts (C) into panel (9),•
tighten with a screwdriver.
Insert dowels (A) into panels (10) and (11)•
with a hammer.
Attach panels (10) and (11) to panel (9),•
insert cam locks (S) into panels (10) and (11),
tighten with a screwdriver.
Cx4
Sx4
Step Seven
Step Eight

7 of 8
13
10 11
9
12
13
10
11
9
13
11
10
9
12
Jx1
Kx1
Slide in panel (13) along the•
grooves into the drawer frame.
Attach panel (12) to body of•
drawer,and tighten with screws (Q).
Install runner (J) and (K) to the•
panels (10) and (11), and tighten
with screws (M) .
Qx4
Mx6
Step Nine
Step Ten
Step Eleven

Repeat the steps 7 to 12 for the two•
other drawers .
Install handle (N) to the front panel of•
drawer (9), and tighten with bolts (P) .
Place the drawers to the body of the bedside .•
Px2
PLEASE KEEP THIS CARE GUIDE FOR FUTURE REFERENCE
Next Retail Ltd, Desford Road, Enderby, Leicester, LE19 4AT.
13
11
10
9
12
N
9
8 of 8
Step Twelve
Step Thirteen