Next OTD LONG SGL CADDY C96911 User manual

H36.5 × D13× W50 cm
C96911
IMPORTANT - RETAIN FOR FUTURE REFERENCE
Produced in China for Next Retail Ltd.
C96911-2022-V1.
Need Help ?
With: Assembly instruction
Missing or damaged parts
CALL: 0333 777 8000
OTD LONG SGL CADDY
Actual product size

C96911
OTD LONG SGL CADDY
If you are missing any fixtures and fittings for your product.
Please contact our customer service team on 0333 777 8000
and they will be happy to arrange for a replacement to be sent
to you free of charge.
One people are required to assemble this item.
If you have a fault with your product, please contact our customer
service team on 0333 777 8000. If you have had the product for
28 days or less you may be offered a replacement, refund or for a
fully trained home service technician to visit your home to assess
the fault and repair the product where possible. If you have had
the product for more than 28 days we will send an independant
home service technician to review and repair the product where
possible and recommend further action.
Missing parts
Home service technicians
Under 30 Minutes
1
C96911-2022-V1.
When moving furniture never drag the pieces across the floor, as this
will cause damage to the joints.
Apply Adhesive substrates for example, sticky tape to the product
Do not use silicone based furniture polish. Silicone in furniture
polishes can break down the lacquer finish.
We suggest you spend a short time reading through this leaflet before
you start.
When you are ready to start, make sure that you have the right tools
and plenty of space.
Unwrap all packaging materials and place the components on a clean
surface to protect it from damage,
We recommend that the packaging is used to protect the surfaces
during assembly.
Carefully check that you have all the parts before beginning assembly.
Due to the size of the product we recommend that it is assembled in
the room intended for use.
Ensure the product is fully assembled as illustrated and all fixings fully
tightened before use. Check fixings regularly to ensure they remain tight.
Clean with soap and water only and clean the product thoroughly.
We suggest you retain these instructions for future reference.
Keep fittings out of children’s reach and keep children well away
from construction area.
This product should only be used on firm, level ground.
Please periodically check all fittings and re-tighten as necessary.
Unwrap all packaging materials and place the components on
top of the carton box or on a clean floor toprotect it from damage.

C96911
OTD LONG SGL CADDY
2
C96911-2022-V1.
280×140×75mm1
2 50×24×165mm 1 1
1 1

C96911
OTD LONG SGL CADDY
4M4
M4×8
S2.5
1
C
D
A
4 1
B
3
C96911-2022-V1.

C96911
OTD LONG SGL CADDY
B×4A×4
100%
M4 M4×8
4
C96911-2022-V1.
1
A
B
D
C
×4

H36.5 × D13× W50 cm
C96911
OTD LONG SGL CADDY
H36.5 cm
D13 cm
W50 cm
5
C96911-2022-V1.
Actual product size