Next SIMPSON 147125 User manual

Tools Needed
Helpline
If you have any problems with this product or require
any replacement fittings please contact Customer
Services Tel: [phone]
ASSEMBLY INSTRUCTIONS.
IMPORTANT - RETAIN FOR FUTURE REFERENCE - READ CAREFULLY.
Regrettably self assembly items cannot be returned once assembly is part or fully completed unless the item is foundto be faulty. Should you
the unassembled product, please repack in the original packaging
• We recommend that the packaging is used to protect the surfaces during assembly.
• A minimum of 2 persons are required to assemble this product.
PRODUCT INFORMATION
IMPORTANT
• We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step instructions.
• Carefully check that you have all parts before beginning assembly.
• Keep fittings out of children's reach and keep children well away from the construction area.
• For general cleaning, periodically dust with a soft cloth.
• Do not rub or scrub the surface when cleaning.
• Do not use abrasive cleaning products or those containing silicone.
• Any spills should be removed immediately with a soft clean damp cloth and dried immediately.
• Made from Glass and metal.
• Made in China.
CARE INSTRUCTIONS
• All assembly fixings should always be tightened properly and periodically check all fixings and tighten if necessary.
• Ensure the product is protected with mats and coasters when items are placed on the surfaces, to prevent scratching or damage.
• Do not put hot dishes directly on the surfaces of the item.
• Avoid keeping furniture in direct sunlight or close to any heat sources as this can cause cracking, discolouration or warping.
• Never drag pieces of furniture across the floor as this will cause damage to the joints.
SIMPSON WHITE METAL BEDSIDE TABLE 147125
Page 1 of 4

FITTINGS
PARTS
B.Bolts x 4
M6 x 30mm
A.Bolts x 4
M8 x 40mm
E.Allen key x
1
C.Spring Washer x 4
M6
(1)Glass top x 1
(2)Left Leg x 1
(3)Right Leg x 1
(4）frame x 1
D.washer x 4
F.Spring Washer x 4
M8
Page 2 of 4

2. Use bolt (B) x 4, spring washer ( c ) x 4 and washer (D)
x 4 to fix the leg onto the glass top and tighten with Allen
Key (E).
3. Turn the table upright
STEP ONE
STEP TWO
(1) Use bolt (A)x4, Spring Washer (F)x4 to fix the metal
frame (4) onto Left Leg (2) and Right Leg (3) and tighten
with Allen Key (E).
1. Put the glass top upside down on carpet floor, and put
the feet section onto the glass top and align the holes.
Page 3 of 4

WARNING: Ensure the area to be drilled is free from
hidden electrical wires and water or gas pipes.
NOTE: Wall fixings are not included. Source suitable fixings
for your wall type, if in doubt consult a qualified tradesperson.
Next Retail Ltd, Desford Road, Leicester, LE19 4AT
STEP THREE
This item comes with a pre-fitted wall attachment strap.
Attach the end of the wall attachment strap to the wall
once the item has been placed into the required position
using an appropriate screw, washer and wall plug for your
wall type
Page 4 of 4