Next WOLIN 469132 User manual

Chair: H93 x W54.5 x D65 CM
Need Help?
With: Assembly instructions
Missing or damaged parts
CALL: 0333 777 8999
WO LIN CH AIR
Distressed velour-French grey
Opulence Heather
100% polyester
Fabric compositionFabric nameItem number
469132
472843
829550
829749
953907
Chunky weave mid grey
Chunky weave mid natural
Distressed velour-silver
100% polyester
100% polyester
100% polyester
100% polyester

Produced in China for Next Retail Ltd 1
BEFORE YOU START
Warnings
We suggest you retain these instructions for future reference
Keep fittings out of children s reach and keep children well
away from construction area.
This product should only be used on firm level ground
Please periodically check all fittings and re-tighten as necessary
Please do not jump or stand on your bed
Avoid exposing the furniture to excessive heat or direct sunlight
as this can cause damage to the
materials and deterioration of the colour
Do s
We suggest you spend a short time reading through
this leaflet before you start
When you are ready to start, make sure that you have the
right tools and plenty of space
Due to the size of the product we recommend that it is assembled
in the room intended for use
Unwrap all packaging materials and place the components on a
clean surface to protect them from damage,
We recommend that the packaging is used to protect the surfaces
during assembly
Carefully check that you have all the parts before
beginning assembly
Ensure the product is fully assembled as illustrated and all fixings
fully tightened before use. Check fixings
regularly to ensure they remain tight
When moving your assembled bed. Lift the bed and
never to drag it.
The support legs ensure that the foot is set
from the floor surface without the.
When in use the legs will create the required
Never allow any kind of liquid to remain on your furniture.
Absorption can cause materials to warp or
finishes to de-laminate
To clean your item, please use a vacuum or lightly brush clean
Please note:
Periodically check the condition of your bed slats and plastic
locating caps to ensure they are in good
condition and have not become loose.
Number of people required to assemble
We recommend two people assemble this product.
Time to assemble
Missing parts
If you are missing any fixtures and fittings for your product
please contact our customer service team on 0333 777 8999
and they will be happy to arrange for a replacement to be sent
to you free of charge.
Home service technicians
If you have a fault with your product please contact our
customer service team on 0333 777 8999. If you have had the
product for 28 days or less you may be offered a replacement,
refund or for a fully trained home service technician to visit your
home to assess the fault and repair the product where possible.
If you have had the product for more than 28 days we will send
an independant home service technician to review and repair
the product where possible and recommend further action.
You can write to us at
Home Customer Services
Next Retail Ltd,
Desford Road,
Leiceste r,
LE19 4 AT
To view our full furniture range please visit www.next.co.uk

GETTING TO KNOW YOUR PRODUCT
Components supplied. Please use this guide if you require replacement parts.
2
Produced in China for Next Retail Ltd.
2018 -V1
Seat:
H58.5xW54.5xD65CM
Front legs:
43x4.3x3CM
Back legs:
42x4.7/3.3x3/3.3CM

N/A
8 x 70mm 4
B
A8 x 55mm 4
supplied (actual size)
Fixtures and fittings 10mm 20 30 40 50 60 70 80 90 100 110 120 130
Ref Dimension Spare
Qty
3
Produced in China for Next Retail Ltd.
2018 -V1
N/A
8 x 12mm
1
C
N/A
8 x 85mm
8
D
EN/A
8 x 22mm
8
N/A

4
Produced in China for Next Retail Ltd.
2018-V1
A x 4
1
2
8×55mm
D x 4 8×22mm
8×85mm
E x 1
C x 4 8×12mm
B x 4 8×70mm
D x 4 8×22mm
8×85mm
E x 1
C x 4 8×12mm
E
A
C
D
E
B
C
D

5
Produced in China for Next Retail Ltd.
2018-V1
3
4

Produced in China for Next Retail Ltd.
2018 -V1
8
CAUTION: Flip beds use strong gas pistons to aid you in lifting the mattress to access your
storage. Do not attempt to operate the mechanism without a mattress in place. This could
cause damage to the frame or potential injury when opening or closing. Use the strap or
handle provided to operate and keep hands and objects away from any of the moving
components.
Minimum and maximum weight restrictions are highlighted below. Ensure your mattress
meets this specification. Do not overload the bed frame as this will damage the mechanism.
Chair: MIN 7.7kg
Chair: H93 x W54.5 x D65 cm
54.5
65
93