Nextorch Magic MAX II User manual

Magic MAX Ⅱ
R
OPERATOR’S MANUAL
FLASHLIGHT

5,6
,3,4
Battery safety guide... . . ...........1 1
3

For using one NT123A battery
+
-
Step 1: Remove the lamp assembly by screwing
it anti-clockwise.
Step 2: Insert the battery correctly by placing
the negative side in first.
Step 3: Screw the lamp assembly on.

For using 2 X AA alkaline batteries
3
Screw off the lamp assembly and
take the NT123A battery off.
Screw off the plastic covers from
the extra barrel.
Screw off the extra barrel on to the
original barrel.

4
convenience
Place two AA batteries into the barrel,
then screw the tailcap on.
Barrel the NT123A and take care of it.

56
LITHIUM BATTERY
NT123A
RUBBER
TAILCAP
CAUDAL PAN
1W LUXEON LED
O-RING O-RING
BARREL
BRAINPAN
REFLECTOR
POLYCARBONATE LENS

7
Magic MAX ⅡFlashlight Features
Magic MAX Ⅱ
Aerospace grade aluminum with
mil-spec type Ⅲhard anodized finish
Anti-scratch polycarbonate
2 AA: 240 minutes
1 NT123A: 150 minutes
Length 92mm
Barrel diameter 22mm
Head diameter 27mm
1 NT123A 3V Lithium Battery or
2 AA 1.5V Alkaline Batteries
Product Model
Bulb
Battery
Material
Lens’ Material
Runtime
Dimensions
weight
Special Features
Augment
dimensions
55g（Original）
80g（With extra barrel）
LUXEON 1W LED
Max 35 lumens
Length 155mm (with extra barrel)
Barrel diameter 22mm
Head diameter 27mm
Compact size,multi-power supply,
Click tailcap,patented anti-rolling
struture,watertight structure,
hard anodized type Ⅲfinish.

BATTERY
Original
Original:
Unscrew the lamp assembly, put the NT123A battery into the barrel with
proper polarity, and install the lamp assembly back on to the barrel.
With extra barrel:
Unscrew the tailcap, put the AA batteries into the barrel with proper polarity,
and install the tailcap back on to the barrel.
Press the rubber tailcap until you hear audible click to turn your flashlight
on. You can turn it off in the same way.
With extra barrel

long
Thank you for choosing NexTORCH flashlight. It produces
not only brilliant, extraordinary white light, but also a lot of heat.
In case of damaging your flashlight and the things around the
flashlight, please pay attention to the following:
1.
Do not put the head of flashlight straight on the flat,
which would damage the bulb .
2. Do not shine the eyes straight as the powerful light could
cause a permanent injury.
3. Do not dismantle the bulb assembly.
NOTICE

NexTORCH guarantees that all products under NexTORCH brand
are free from manufacture defects. NexTORCH will repair or
replace any defective products,Please contact your local dealer
or e-mail to [email protected].
This warranty excludes the following:
1). Failure of product due to misuse and/or lack of maintenance.
2). Internal water damage.
NexTORCH LIFETIME WARRANTY
4
DISMANTLE

11
READ THE FOLLOWING BEFORE USING
It is strongly recommend that the user takes the following
precautions to avoid fire, violent rupture, personal injury
or death when using the Lithium-Manganese Dioxide
Cylindrical Batteries.
NT123A, NT2 Lithium Battery Safety Guide
HANDLE WITH CARE
If liquid discharged from a lithium battery comes in contact with clothing, rinse well with water. If the
discharged liquid comes into contact with eyes or skin, rinse immediately with water and seek medical
attention if necessary.
DO NOT HEAT OR DISPOSE OF THEM IN A FIRE
When heated, lithium batteries may leak. When short circuited, they may burst or combust. If
disposed of them in a fire, they may violently rupture, causing personal injury.
DO NOT CHARGE
Charging a lithium battery may cause swelling, over heating, leakage, violent rupture or fire.
DO NOT FORCED DISCHARGE
Forced discharge may result in swelling, overheating, leakage, violent rupture or fire.
DO NOT SHORT CIRCUIT
Short circuiting a lithium battery may lead to swelling, overheating, leakage, violent rupture or fire.
DO NOT DISASSEMBLE, PERFORATE, DEFORM OR APPLY MECHANICAL PRESSURE
Disassembly or perforation of a lithium battery may lead togeneration of gas or overheating. Pressure or
deformation may lead to an internal short circuit.
DO NOT USE WITH OTHER TYPES OF BATTERIES OR OLDER LITHIUM BATTERIES
Different types of batteries or older lithium batteries mayexhibit different voltage or capacity characteristics.
Using with a new lithium battery may cause over discharge, resulting in swelling, overheating, leakage,
violent rupture or fire.
OBSERVE THE PROPER POLARITY
If a lithium battery is inserted backwards, the resulting polarity reversal may lead to a short circuit or
over charging. This can
cause swelling, overheating, leakage, violent rupture or fire.
DO NOT SWALLOW OR TAKE INTERNALLY
Always store batteries out of the reach of children and assure that batteries cannot be easily removed
from equipment. If lithium batteries are swallowed, seek immediate medical attention.
STORE BATTERIES PROPERLY
Store lithium batteries in a cool, dry place out of direct sunlight. Excessive moisture or humidity may lead
to deterioration, corrosion
and generation of combustible gas.
DO NOT SOLDER OR WELD ON THE BATTERY SURFACE DISPOSAL
Recycle used lithium batteries. Do not dispose of them in the trash.

12
ACCESSORIES
NexTORCH offers a full range of product accessories
suited for your flashlight.
NT123A LR6
V5012
V2560
SL6
V4018
LC6
Lithium battery AA alkaline
Express clip Express clip
Holster
Silicone grease
Lens cleaner

关于NT123A锂电池及安全使用指引.....22
附件 ..................23
Magic Max Ⅱ快速安装指南. . . . . . .
14,15,16
Magic Max Ⅱ电筒结构. . . . . . . . . .
Magic Max Ⅱ电筒具体参数. . . . . . . . . 19
Magic Max Ⅱ使用说明. . . . . . . . . . . 20
Magic Max Ⅱ使用注意事项及保养注意事项. . 21
17,18

14
+
-
使用NexTORCH NT123A锂锰电池
MAGIC MAX Ⅱ快速安装指引
第一步：拧开灯头。
第三步：拧上灯头。
第二步：放入NexTORCH NT123A锂锰电池，
注意正确放置正负极。
R

For using 2 X AA alkaline batteries
15
MAGIC MAX Ⅱ快速安装指引
使用两节AA碱性电池
第一步：拧开灯头，取出NT123A锂电池。
第二步：拧开加长筒身的塑料盖。
第三步：将加长筒身拧进原来的筒身。

16
第四步：将两节AA碱性电池放进筒身，拧上尾盖。
第五步：将NT123A锂电池放好。
完成以上步骤，您就可以开始使用它，享受NexTORCH
给您带来的方便和乐趣。

17 18
Magic MAX Ⅱ
电筒结构
NT123A锂锰电池
按钮开关
尾盖
头盖
反光杯
防刮PC镜片
1瓦 LUXEON LED
防水圈 防水圈
筒身

19
产品编号
灯泡
一节NT123A 3V锂锰电池或
两节AA电池
航空等级强化铝材6061-T6
防刮PC镜片
150分钟（使用一节NT123A）
240分钟（使用两节AA电池）
92mmX22mm(镜头直径27mm)
加接加长筒身长155mm
55g（不含电池），加接加长筒身
重80克
轻巧型设计，专利防滚动结构，防水防
震结构设计，按钮尾盖，多电源替换设
计，表面采用三型硬质阳极氧化处理，
更结实耐磨。
LUXEON 1W LED，最大输出35流明
电源
材质
镜片材料
电池使用时间
尺寸
重量
产品特点
Magic MAX Ⅱ电筒具体参数
Magic MAX Ⅱ

20
NT123A
AA
标准版
加接加长筒身版
标准版：
拧开灯头，注意电池的正负极，放入NT123A电池，拧上灯头。
加长筒身版：
拧开尾盖，注意电池的正负极，放入两节AA电池，拧上尾盖。
电筒处于关闭状态时，按动尾盖橡胶帽听见“咔吧”声表示电
筒打开。重复以上步骤即关闭。

21
感谢您选择了品质卓越的NexTORCH 系列电筒。使
用时请注意以下事项：
1.不要将光线直射入人的眼睛，较强的光线会对眼睛造成
永久性伤害。
2.灯头不要经常拆解，以免造成反光杯或灯泡损伤。
3.请不要将两节不一样的电池混合使用。
Magic MAX使用注意事项
Magic MAX保养注意事项
对电筒进行日常的常规保养，使其能继续为您提供高
质量的服务。
1. 每次使用后请用干净的软布对电筒进行擦拭。
(NexTORCH 为您提供一个专业的镜片清洁工具，请参
考后面的附件说明)。
2. 当电筒在沾染海水或腐蚀性液体时请及时用清水清洗，
并用电吹风吹干。
3. 当灯头及尾盖拧动不畅时，请在接口处涂少许硅脂。
（您可以到专业的户外店、五金店购 买 到此 类 产 品，
或使用由NexTORCH 为您准备的专业硅脂，请参考
后面的附件说明）。
4. 电筒在不使用时请将电池取出，放在阴凉处保存。