Nietzsche Enterprise WZB-SMB02 User manual

ZIGBEE
GLASS BREAK
DETECTOR
USER’S
MANUAL
Model Number: WZB-SMB02

WZB-SGB02, ZigBee Magnec Switch, is
a wireless device with pulse detecng funcon
which is used to secure glass from being broken
and operang with WZB-06GP ZigBee
Mul-Gateway to protect any unexpected
break through. They add an extra layer of
security to homes and small businesses, and
add peace of mind for families with young
children.
Periodic transmission of supervision
signals is used to confirm system connecvity
at all mes. The detector is powered by a
standard CR2032 baery, which is constantly
monitored, with automac reporng to the
Mul-Gateway when the baery needs to be
replaced.
By binding it to the central device of
security system, WZB-06GP ZigBee
Mul-Gateway, the ZigBee Glass Break
Detector is default as Zone #7, whenever the
magnec switch triggers, then the WZB-06GP
will send out SOS messages to assigned 4 SOS
cellphone numbers and push Digital output #7
correspondingly. Maximum distance for
wireless connecon is 150 meters (in open
areas). Although line of site is not required, the
maximum range is based on opmal condions
with minimal interference. Objects such as
walls, trees, etc affect wireless range. Actual
range may vary, depending on environment.
PRODUCT INTRODUCTION
1. Wireless Magnec door contact
2. Transming Distance: 150m (490 feet)
(Line of sight)
3. Transming Distance: 150m
4. Transming Current: 30mA
5. Sending Frequency: 2.4GHz
6. Trigger resistance: ∞Ω
7. Surge proof voltage: 2000V(Max)
8. Acvated holding me: 3~10 seconds
9. Ambient temperature: -10℃~60℃
(14℉~140℉)
10. Dimension: ψ3.7 * 1.6 cm
(ψ1.4 * 0.6 inches)
11. Baery Life: 1 to 2 year
12. Baery type: CR2032 3.0V Lithium
Ion Baery
13. Number of baeries: 1
PRODUCT PROFILE
• Superior transmission range.
• Fully supervised.
• Factory-selected ID
• Long-life standard lithium baery included.
• Low-baery signaling.
• Compable with WZB-06GP and
WZB-02485R, wireless panels and repeaters.
1. Wireless glass break detecng
2. Transming Distance: 150m (490 feet)
(Line of sight)
3. Baery Life: 1 to 2 year
SPECIFICATION
PRODUCT FEATURE
DETAILED PRODUCT DESCRIPTION

1. Taking the baery into baery box before
installaon. And make sure WZB-06GP is
powered on.
2. Press WZB-06GP S1 to JOIN the glass break
detector. Once the glass break detector
has been linked, the blue LED light on front
cover will flash every 30 seconds. If
WZB-06GP does not link with Magnec
Switch, then just press WZB-06GP S1 once
again unl the Magnec Switch is being
linked.
Please note: Do NOT power on the devices that
you do not want to link.
Please avoid pressing 2 WZB-06GPs’ S1 buons at the same me.
3. Check the glass break detector to see if it comes into operang state. Once the Magnec
Switch has been linked, the blue LED light on front cover will flash every 30 seconds.
4. Aer linking, you may hit the glass break detector to test the output of the glass break
detector. The glass break detector should send out RF signal to WZB-06GP and trigger the
digital output #7. (Installaon is completed)
5. Select proper place (normally mounted on the side of windows glass), fix it with scky strips
or glues.
6. If you want to disconnect one glass break detector, you can press WZB-06GP S1 for 2 mes
quickly, then follows pressing the intended disconnecng glass break detector S1 for 3 mes
quickly, then it will disconnect the single glass break detector from the Wireless Network.
7. If you want to dismiss all Wireless Network, then press WZB-06GP S1 for 1 me long press
unl it pops up both red and blue light; then press all other glass break detector for 1 me
long press unl it pops up long blue light. Now the whole network is dismissed. Then the
detectors are ready to join other wireless network.
NOTICE
1. The glass break detector should have two quick LED flash regularly when it is in low
baery. When low baery happens, please change the baery immediately.
2. The glass break detector cannot be installed under worse environment. E.g. coldest,
hoest, dusty.
3. Please test it monthly.
4. For various reasons, including, but not limited to changes in environmental condions,
electric disrupons and tampering, the product may not perform as expected. The user is
advised to take all necessary precauons for his/her safety and the protecon of his/her
property.
5. Please install detectors away from other 2.4GHz devices at least 2 meters to avoid from
possible interference.
INSTALLATION AND TEST
INSTALLATION AND TEST

Copyright2011 Nietzsche Enterprise Co., Ltd. All right reserved.
Nietzsche Enterprise reserves the right to make changes
and improvements to its products without notice
Contact Information: Email: zigbeenhr@shop, Website: www.shop-wifi.com/wireless-sensors