Nightingale Veronna 7000 User manual

TM
MODEL 7000
SHOWN
SCAN this QR Code To Learn
More About How To Use
This VERONNA Chair.
VERONNA
How To Care For Your Veronna™
With regular care and maintenance, your VERONNA™ will provide many
years of superior performance and satisfaction. To maintain the quality
of your Nightingale product, please follow the cleaning procedures
outlined here.
Mechanism
Oil sparingly moving parts once a year with light machine oil.
NOTE: to prevent dripping, avoid over lubrication which may
cause damage to surrounding surfaces.
Fabric
Clean with mild detergent and water applied with a damp clean
cloth or sponge. Rinse with water. Never use hot water and
avoid scrubbing. Use gentle movements.
Plastic parts
Clean with mild detergent and water. Do not use abrasives or
excessive amounts of cleaner.
Frame
Powder coat frames can be cleaned by wiping with a damp
cloth and any mild detergent.
* The instruction for the care and maintenance of Nightingale Products are
provided to you as a service. No warranty is implied since results may vary.
MANUFACTURING CONTRACT OFFICE CHAIRS SINCE 1928
User Guide Instructions
Nightingale Ofce Chairs
Toll-Free Phone: [phone]
Fax: [phone]
Website: www.nightingalechairs.com
Email: [email protected]
66%
RECYCLABLE
Quality is not an act,
it is a habit...
The Nightingale VERONNA™
is 66% Recyclable
Quality is not an act,
it is a habit...
The Nightingale VERONNA™
is 66% Recyclable
Quality is not an act,
it is a habit...
The Nightingale VERONNA™
is 66% Recyclable

Congratulations On Purchasing
Nightingale’s VERONNA™
Please read and understand this user guide with
instructions before operating this ofce chair.

D. Infinite Position Tilt Lock To
lock tilt in position, turn knob
backwards. To unlock chair, turn
knob forward and lean back to
release the lock.
I. Seat Slide Adjustment To slide
seat forward, lock tilt (D) in up-
right position. Push button in to
activate seat slide and slide the
seat forward to desired position,
release button to lock. To return
seat to original position, push
button in and remove weight from
chair. Release button when seat
is moved back to desired
position.
A. Pneumatic Height Adjustment
To lower height, pull lever up while
seated. To raise seat height, pull
lever up with weight off the chair.

B. Tension Knob Turn clockwise
to increase tension, turn counter-
clockwise to decrease tension.


E. Arm Height Adjustment
To raise or lower arm height
push button up and move
arm to desired position.
Release to lock.

H. Arm Pad Pivot Adjustment
Turn arm pads inward to desired
position for increased arm
support.
G. Arm Pad Front to Back
Adjustment Push arm pad
forward or pull backward to
desired position for increased
or decreased arm support.
C. Lumbar Height Adjustment
To raise lumbar height support,
simultaneously pull up levers on
each side of back lumbar adjustment.
To lower Lumbar support,
simultaneously push down both sides of
the Lumbar support levers.
F. Arm Pad Width Adjustment
To increase or decrease arm
pad width adjustment, push
arm pad to desired position.
UP
turn

UP
inward




D
AB



How To Use and Adjust My VERONNATM
PASS IT ON!
Our customers often tell us
their friends stop and ask about
their VERONNA™. If this happens to you,
please give your friend this card so
they can learn more about our chairs.
Nightingalechairs.com
1.800.363.8954
[email protected]
PASS IT ON!
Our customers often tell us
their friends stop and ask about
their VERONNA™. If this happens to you,
please give your friend this card so
they can learn more about our chairs.
Nightingalechairs.com
1.800.363.8954
[email protected]
PASS IT ON!
Our customers often tell us
their friends stop and ask about
their VERONNA™. If this happens to you,
please give your friend this card so
they can learn more about our chairs.
Nightingalechairs.com
1.800.363.8954
[email protected]
E
C
F
G
H
I