Nightingale CXO 6200 Series User manual

How To Care For Your CXO™
With regular care and maintenance, your CXO™ will provide many years of
superior performance and satisfaction. To maintain the quality of your
Nightingale product, please follow the cleaning procedures outlined here.
Mechanism
Once a year lubricate using WD40 or similar product. (Spray with plastic
straw attached to sprayer) NOTE: To prevent dripping, avoid over
lubrication which may cause damage to surrounding surfaces.
ABLEX™ Mesh
Clean with mild detergent and water applied with a clean damp cloth
or sponge. Rinse with a damp (water) cloth and let dry. Never use
hot water and avoid scrubbing. Use gentle movements.
Plastic parts
To clean spray with a mild detergent and wipe off using a damp
(water) cloth. Do not use abrasives or excessive amounts of cleaner.
Frame
Powder coat frames can be cleaned by wiping with a damp
cloth and any mild detergent.
* The instruction for the care and maintenance of Nightingale Products are
provided to you as a service. No warranty is implied since results may vary.
Nightingale Ofce Chairs
Toll-Free: 1.800.363.8954
Toll-Free Fax: [phone]
www.nightingalechairs.com
[email protected]
SCAN this QR Code To Learn
More About How To Use
This CXO Chair.
CXO User Guide Instructions
6200 Series
94%
RECYCLABLE
MODEL 6200D
SHOWN
Made in a 100% waste
free manufacturing facility.
Since 1928
ISO 14001 & ISO 9001 Certied
TB117-2013 compliant

Congratulations On Purchasing
Nightingale’s CXO™
Please read and understand this user INSTRUCTION
guide BEFORE operating this ofce chair.

H

I
(Found in the back)

C

B
(Found in the back)
Headrest Available
Only On CXO 6200D
Model
[ MODEL CXO 6200D ]
[ MODEL CXO 6200 ]



E

D

A

F

G1

G2
How To Use and Adjust My CXOTM
C. Innite Tilt Lock
To lock chair in desired position
rotate the paddle clockwise. To
unlock chair for free movement
rotate paddle counter clockwise.
A. Pneumatic Height Adjustment
To lower chair, rotate the paddle
counter clockwise while seated. To
raise chair rotate the paddle counter
clockwise with no weight on the
seat.
H. Lumbar Adjustment
Move lumbar inwards to desired
depth for increased lumbar support.
Press button down to release or
decrease support. To raise, lift
lumbar to desired height and release.
To lower lumbar, lift to top position.
B. Seat Slider
LIFT lever bar up to unlock, move
seat to desired position, release
lever to lock into position.
D. Tension Knob
Turn clockwise to increase
tension, turn counter-clockwise
to decrease tension.
I. Height & Angle Adjustable
Headrest
Pull headrest up or down, while
seated, to desired height. To
pivot angle to desired position,
tilt headrest or backward.
Headrest Feature Available Only
On The 6200D CXO Version.
F. Horizontal Arm Adjustment
Pull arm out from seat to
desired position from bottom of
arm, for increased width. Push
arm in to decrease width.
E. Arm Height Adjustment
To raise or lower arm height,
pull trigger up and move to
desired position. Release
trigger to lock into position.
G1
G2
G1. Arm Pivot Adjustment
(Front button on side of pad)
Push button in to pivot, release
button to lock into position.
G2. Arm Pad Front To Back
Adjustment
(Back button on side of pad)
Push button in to move
to desired position, release
button to lock into position.