Nightingale VERONNA 7000 Series Instruction Manual

User Handbook
VERONNA
7000 Series
nightingalechairs.com

Congratulations,
this VERONNA™ is yours.
Please read and understand this user handbook
before operating this office chair.
A
C
B
I
G
E
E
F
H

Using & Adjusting Your VERONNA™
Innite Position Tilt Lock
To lock tilt in position, turn knob
backwards. To unlock chair, turn
knob forward and lean back to
release the lock.
Seat Slide Adjustment
To slide seat forward, lock tilt (D) in
upright position. Push button in to
activate seat slide and slide the seat
forward to desired position, release
button to lock. To return seat to
original position, push button in and
remove weight from chair. Release
button when seat is moved back to
desired position.
Pneumatic Height Adjustment
To lower height, pull lever up while
seated. To raise seat height, pull lever
up with weight off the chair.
Tension Knob
Turn clockwise to increase
tension, turn counter-clockwise
to decrease tension.
Arm Height Adjustment
To raise or lower arm height
push button up and move
arm to desired position.
Release to lock.
Arm Pad Pivot Adjustment
Turn arm pads inward to desired
position for increased arm
support.
Arm Pad Front to Back
Adjustment
Push arm pad forward or pull
backward to desired position
for increased or decreased arm
support.
Lumbar Adjustment
To raise lumbar support,
simultaneously pull up levers on each
side of back lumbar adjustment.
To lower Lumbar support,
simultaneously push down both
sides of the Lumbar support levers.
Arm Pad Width Adjustment
To increase or decrease arm
pad width adjustment, push
arm pad to desired position.
UP
turn
UP
inward
A
D
G
B
E
H
C
F
I

Care Instructions
Mechanism
Once a year, lubricate using light sewing machine oil or similar product. (Spray
with plastic straw attached to sprayer). NOTE: To prevent dripping, avoid over
lubrication which may cause damage to surrounding surfaces.
Plastic Parts
To clean, spray with a mild detergent and wipe off using a damp (water) cloth.
Do not use abrasives or excessive amounts of cleaner.
Frame
Chrome frames can be cleaned by wiping with a damp cloth and any mild
detergent.
Fabric
Clean with mild detergent and water applied with a damp clean cloth or sponge.
Rinse with water. Never use hot water and avoid scrubbing.
Use gentle movements.
*The instruction for the care and maintenance of Nightingale Products are provided to you as a sevice. No
warranty is implied since results may vary.
With regular care and maintenance, your
Veronna™ will provide many years of superior
performance and satisfaction. To maintain the
quality of your Nightingale chair, please follow
the cleaning instructions outlined here.
Nightingale Corp.
T 1.800.363.8954
F 1.800.637.6784
www.nightingalechairs.com
[email protected]
2
RECYCLABLE
for more information, please visit
www.nightingalechairs.com