Nightingale SXO 6100 Series Instruction Manual

User Handbook
SXO
6100 Series
nightingalechairs.com

Congratulations,
this SXO™ is yours.
6100D
6100CH-SM
Please read and understand this user
handbook before operating this oce chair.
A
B
F
E
DC

Using & Adjusting Your SXO™
Pneumatic Height Adjustment
To lower, tilt the lever up while seated. To
raise, tilt the same lever up with all weight
off the seat.
Adjustable Headrest (Optional)
Simply lift headrest to desired position—
locks automatically. To unlock, lift to top
position and slide down.
F
A
Seat Slider
Lift middle lever up to unlock. Hold the lever
with minimal weight on seat, and use gentle
force to move seat to desired position.
Release to lock.
E
Height & Pivot Adjustable Arms
To pivot, press/hold button under the arm
pad and adjust angle—release to lock. To
adjust arm height, press/hold front button
and lift or slide into position—release to lock.
HEIGHT
PIVOT
B
Multi-Position Tilt Lock
Single position lock—turn left lever up to lock,
turn lever down to unlock. To activate positive
back lock release, gently lean into back.
C
Tension Knob Control
Turn front-knob clockwise to increase tension,
turn the same knob counter-clockwise to
decrease tension.
D

Care Instructions
With regular care and maintenance, your SXO™
will provide many years of superior performance
and satisfaction. To maintain the quality of your
Nightingale product, please follow the cleaning
instructions outlined here.
Nightingale Corp.
T 1.800.363.8954
F 1.800.637.6784
nightingalechairs.com
[email protected]
for more information, please visit
nightingalechairs.com
Mechanism
Once a year, lubricate using light sewing machine oil or similar product.
(Spray with plastic straw attached to sprayer). NOTE: To prevent dripping,
avoid over lubrication which may cause damage to surrounding surfaces.
ABLEX™ Mesh
Clean with mild detergent and water applied with a clean damp cloth or
sponge. Rinse with a damp (water) cloth and let dry. Never use hot water
and avoid scrubbing. Use gentle movements.
Plastic Parts
To clean, spray with a mild detergent and wipe off using a damp (water)
cloth. Do not use abrasives or excessive amounts of cleaner.
Frame
Powder coat frames can be cleaned by wiping with a damp cloth and any
mild detergent.
*The instruction for the care and maintenance of Nightingale Products are provided
to you as a sevice. No warranty is implied since results may vary.
®
2
certified by NSF RECYCLABLE