Nightingale CXO User manual

How To Care For Your CXO™
With regular care and maintenance, your CXO™ will provide many years of
superior performance and satisfaction. To maintain the quality of your
Nightingale product, please follow the cleaning procedures outlined here.
Mechanism
Once a year lubricate using WD40 or similar product. (Spray with plastic
straw attached to sprayer) NOTE: To prevent dripping, avoid over
lubrication which may cause damage to surrounding surfaces.
ABLEX™ Mesh
Clean with mild detergent and water applied with a clean damp cloth
or sponge. Rinse with a damp (water) cloth and let dry. Never use
hot water and avoid scrubbing. Use gentle movements.
Plastic parts
To clean spray with a mild detergent and wipe off using a damp
(water) cloth. Do not use abrasives or excessive amounts of cleaner.
Frame
Powder coat frames can be cleaned by wiping with a damp
cloth and any mild detergent.
* The instruction for the care and maintenance of Nightingale Products are
provided to you as a service. No warranty is implied since results may vary.
MANUFACTURING CONTRACT OFFICE CHAIRS SINCE 1928
User Guide Instructions
Nightingale Ofce Chairs
Toll-Free Phone: [phone]
Fax: [phone]
Website: www.nightingalechairs.com
Email: [email protected]
94%
RECYCLABLE
SCAN this QR Code To Learn
More About How To Use
This CXO Chair.
Quality is not an act,
it is a habit...
The Nightingale CXO™
is 94% Recyclable
Quality is not an act,
it is a habit...
The Nightingale CXO™
is 94% Recyclable
Quality is not an act,
it is a habit...
The Nightingale CXO™
is 94% Recyclable
MODEL 6200D
SHOWN
TM

Congratulations On Purchasing
Nightingale’s CXO™
Please read and understand this user INSTRUCTION
guide BEFORE operating this ofce chair.

H

I
(Found in the back)

C

B
(Found in the back)
Headrest Available
Only On CXO 6200D
Model
[ MODEL CXO 6200D ]
[ MODEL CXO 6200 ]



E

D

A

F

G1

G2
How To Use and Adjust My CXOTM PASS IT ON!
Our customers often tell us
their friends stop and ask about
their CXO™ If this happens to you,
please give your friend this card so
they can learn more about our chairs.
Nightingalechairs.com
1.800.363.8954
[email protected]
PASS IT ON!
Our customers often tell us
their friends stop and ask about
their CXO™ If this happens to you,
please give your friend this card so
they can learn more about our chairs.
Nightingalechairs.com
1.800.363.8954
[email protected]
PASS IT ON!
Our customers often tell us
their friends stop and ask about
their CXO™ If this happens to you,
please give your friend this card so
they can learn more about our chairs.
Nightingalechairs.com
1.800.363.8954
[email protected]

C. Infinite Tilt Lock
To lock chair in desired position
rotate the paddle clockwise. To
unlock chair for free movement
rotate paddle counter clockwise.
A. Pneumatic Height Adjustment
To lower chair, rotate the paddle
counter clockwise while seated. To
raise chair rotate the paddle counter
clockwise with no weight on the
seat.
H. Horizontal and Vertical
Lumbar Adjustment
For horizontal lumbar adjustment
press H1 button down and move
lumbar to desired (in or out)
position, release button to lock.
For vertical lumbar adjustment,
lift lumbar H2 to desired position.
To lower lumbar lift to top position
and lower to lowest position.
From that lowest position lumbar
can then be reset as required.
B. Seat Slider LIFT lever bar up
to unlock, move seat to desired
position, release lever to lock
into position.
D. Tension Knob Turn clock-
wise to increase tension, turn
counter-clockwise to decrease
tension.
I. Ratchet Height Adjustable
Headrest Simply lift headrest to
desired position and headrest
locks automatically. To lower
headrest lift to top position and
headrest can then be lowered to
lowest position. From the lowest
position the headrest can be
reset as required. Headrest
Feature Available Only On The
6200D CXO Version.
F. Horizontal Arm Adjustment
Pull arm out from seat to
desired position from bottom of
arm, for increased width. Push
arm in to decrease width.
E. Arm Height Adjustment
To raise or lower arm height,
pull trigger up and move to
desired position. Release
trigger to lock into position.


G1
G2


G1. Arm Pivot Adjustment
(Front button on side of pad)
Push button in to pivot, release
button to lock into position.
G2. Arm Pad Front To Back
Adjustment (Back button on side
of pad) Push button in to move
to desired position, release
button to lock into position.
H2
H1
