Nikon Monarch 7iVR User manual

Instruction manual/Manual de instrucciones/
Manuel d’utilisation/Manual de instruções
Pt
En
Fr
Es

English ......................................... p. 3-22
Español ...................................... p. 23-42
Français ...................................... p. 43-62
Português brasileiro ................. p. 63-82

3
En
Fr
Es
Pt
CONTENTS
English
[Introduction]
Introduction ........................................................................ 4
Cautions before use ...................................................... 5-7
[Getting to know the Laser Rangefinder]
Key features ......................................................................... 8
Nomenclature/Composition ......................................... 9
Internal display ................................................................ 10
[Functions]
VR (Vibration Reduction) function............................. 11
Target priority mode....................................................... 11
[First step]
Inserting/Replacing battery......................................... 12
[Mode settings]
Operation overview ........................................................ 13
Changing the distance display unit (m/YD) (F1)... 14
Changing the measurement display mode (F2)... 15
Changing the target priority mode (F3) .................. 16
[Measurement]
Adjusting diopter............................................................. 17
Measuring........................................................................... 17
Single measurement....................................................... 18
Continuous measurement............................................ 18
[Technical notes]
Specifications ............................................................ 19-20
Troubleshooting/Repair ........................................ 21-22

4
En
Fr
Es
Pt
● About the manual
・No part of the manual included with this product may be reproduced, transmitted, transcribed, stored in a
retrieval system, or translated into any language in any form, by any means, without Nikon’s prior written
permission.
・Nikon will not be held liable for any errors this manual may contain.
・The appearance of this product and its specifications are subject to change without notice.
●About controls for radio interference
・This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired
operation.
・This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules and to EU EMC directive. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment
Regulations.
● About measurement results
This Nikon Laser Rangefinder is a basic rangefinder. Its results cannot be used as official evidence.
[Introduction]
Thank you for purchasing the Nikon Laser Rangefinder MONARCH 7i VR.
Before using this product, please read these instructions thoroughly to ensure correct usage.
After reading, please keep this manual handy for easy reference.

5
En
Fr
Es
Pt
Please observe the following
guidelines strictly so you can use
the equipment properly and
avoid potentially hazardous
problems. Before using this
product, read thoroughly the
“Cautions before use” and
instructions on correct usage
accompanying the product.
Keep this manual within reach
for easy reference.
WARNING
This indication alerts you to the fact
that any improper use ignoring the
contents described herein can result
in potential death or serious injury.
CAUTION
This indication alerts you to the fact
that any improper use ignoring the
contents described herein can result
in potential injury or material loss.
SAFETY PRECAUTIONS (Laser)
The Nikon Laser Rangefinder uses an
invisible laser beam. Be sure to
observe the following:
Warning
• Do not press the PWR button while
looking towards the optics from the
objective side. Failure to do this may
negatively affect or damage your
eyes.
• Do not aim at the eye.
• Do not point the laser at people.
• Do not look at the laser with another
optical instrument such as through
lenses or binoculars, nor with the
naked eye. This may result in damage
to the eyes.
• When not measuring, please
keep your fingers away from the
PWR button to avoid accidentally
emitting the laser beam.
• When not in use for an extended
period, please remove the battery
from the body.
• Do not disassemble/remodel/repair
the Nikon Laser Rangefinder. The
emitting laser may be harmful to
your health. A product that has been
disassembled/remodeled/repaired is
not guaranteed by the manufacturer.
• Keep the Nikon Laser Rangefinder
out of reach of children when
stored.
• If the Nikon Laser Rangefinder’s
body cover is damaged, or if it
emits a strange sound due to
dropping or some other cause,
remove the battery immediately
and stop using.
￭ Cautions before use

6
En
Fr
Es
Pt
SAFETY PRECAUTIONS
(Lithium battery)
If handled incorrectly, the battery
may rupture and leak, corroding
equipment and staining clothing.
Be sure to observe the following:
• Install the battery with the + and –
poles positioned correctly.
• The battery should be removed
when exhausted or during
extended periods of non-use.
• Do not short the end terminal of
the battery chamber.
• Do not carry together with keys
or coins in a pocket or bag, it may
short and cause overheating.
• Do not expose the battery to water,
or a flame. Never disassemble the
battery.
• Do not charge the lithium battery.
• If liquid from a damaged battery
comes into contact with clothing or
skin, rinse immediately with plenty
of water. If liquid from a damaged
battery enters the eyes, rinse
immediately with clean water, then
consult a doctor.
• When disposing of the battery,
follow your local area regulations.
this product or other small parts
out of reach of children.
• Prevent children from putting
the rubber eyecup or small parts,
etc. into their mouths. If children
swallow such parts, consult a
doctor immediately.
• If using the rubber eyecup for a
long period of time, some people
may suffer skin inflammation. If any
symptoms occur, stop using it and
consult a doctor immediately.
• When carrying the Nikon Laser
Rangefinder, store it in the case.
• If your Nikon Laser Rangefinder
should fail to operate correctly,
discontinue use immediately and
consult with your local dealer for
instructions on where to send it for
repair.
SAFETY PRECAUTIONS
(Monocular)
The Nikon Laser Rangefinder
employs a monocular in its optical
system in order to aim at the target.
Be sure to observe the following:
Warning
• Never look directly at the sun, an
intense light or the laser beam
when using the Nikon Laser
Rangefinder.
Cautions
• When not using the Nikon Laser
Rangefinder, do not push the
PWR button.
• Do not use this product while
walking. Failure to observe this
may cause injury or malfunction
as a result of walking into
something, hitting others, falling
or other accidents.
• Do not swing around by the
strap. This may result in hitting
others and cause injury.
• Do not place this product in
an unstable place. Failure to
observe this may result in falling
or dropping and cause injury or
malfunction.
• Keep the plastic bag used to wrap

7
En
Fr
Es
Pt
Storage
• Water condensation or mold may
occur on the lens surface because
of high humidity. Therefore, store
the Nikon Laser Rangefinder in a
cool, dry place.
After use on a rainy day or at night,
thoroughly dry it at room
temperature, then store in a cool,
dry place.
CARE AND MAINTENANCE
Lenses
• When removing dust on the lens
surface, use a soft oil-free brush.
• When removing stains or smudges
like fingerprints from the lens
surface, wipe the lenses very gently
with a soft clean cotton cloth or
quality oil-free lens tissue. Use a
small quantity of pure alcohol (not
denatured) to wipe stubborn
smudges. Do not use velvet cloth
or ordinary tissue, as it may scratch
the lens surface. Once the cloth has
been used for cleaning the body, it
should not be used again for the
lens surface.
Main body
• Clean the body surface with a soft,
clean cloth after blowing away dust
with a blower* lightly. Do not use
benzene, thinner, or other cleaners
containing organic solvents.
*A blower is rubber cleaning
equipment that blows air from a
nozzle.
SAFETY PRECAUTIONS
Cautions
• This product is not designed for use
underwater.
• Rain, water, sand and mud should
be removed from the rangefinder
body surface as soon as possible,
using a soft, clean cloth.
• If the Nikon Laser Rangefinder is
exposed to sudden changes in
temperature, water condensation
may occur on lens surfaces. Do
not use the product until the
condensation has evaporated.
• Do not leave the Nikon Laser
Rangefinder in a car on a hot or
sunny day, or near heat-generating
equipment. This may damage or
negatively affect it.
• Do not leave the
eyepiece in direct
sunlight.
The condenser
effect of the lens
may damage the
internal display
surface.
This symbol indicates that this battery is to be
collected separately.
The following apply only to users in European
countries.
• This battery is designated for separate collection at an
appropriate collection point. Do not dispose of as
household waste.
• For more information, contact the retailer or the local
authorities in charge of waste management.
Symbol for separate collection applicable in European
countries
This symbol indicates that this product is to be
collected separately.
The following apply only to users in European
countries.
• This product is designated for separate collection at
an appropriate collection point. Do not dispose of as
household waste.
• For more information, contact the retailer or the local
authorities in charge of waste management.
Symbol for separate collection applicable in European
countries

8
En
Fr
Es
Pt
[Getting to know the Laser Rangefinder]
￭ Key features
• Measurement range of actual distance:
7.3-915 meters/8-1,000 yards
• VR (Vibration Reduction) function is employed for
reducing the vibrations caused by hand movement
• Horizontal distance mode and actual distance mode
can be easily switched
• Target Priority Switching System for measuring
overlapping subjects
• High-quality 6x finder with multilayer coating
• Larger ocular for easy viewing
• Press and hold down the PWR button to activate the
continuous measurement function
• Automatic power shut-off (approx. 8 sec.
unoperated from standby screen)
• Waterproof and fogproof, but not designed
for underwater usage (the battery chamber is
rainproof)
• Invisible/Eyesafe EN/IEC Class 1M Laser
The Nikon Laser Rangefinder uses an invisible
laser beam for measuring. It measures the time the
laser beam takes to travel from the rangefinder
to the target and back. Laser reflectivity and
measurement results may vary according to
climatic and environmental conditions, as well
as the color, surface finish, size, shape and other
characteristics of the target.
The following conditions facilitate measuring:
• Cloudy weather
• Bright-colored target
• Large-size target
• When laser incidence to the target’s reflective
surface is straight
Measurement may be inaccurate or fail in the
following cases:
• In snow, rain or fog
• Small or slender target
• Black or dark target
• Target has stepped surface
• Moving or vibrating target
• When measuring the surface of water
• Target measured through glass
• When the target is glass or a mirror
• When laser incidence to the target’s reflective
surface is oblique

9
En
Fr
Es
Pt
■Nomenclature/Composition
1. PWR button (POWER ON/Measurement
button)
2. Monocular objective lens/Laser emission
aperture
3. Laser detector aperture
4. MODE button
5. 6x monocular eyepiece
6. Eyecup/Diopter adjustment ring
7. Diopter index
8. Strap eyelet
9. Battery chamber cover
10. Battery chamber cover“Open”indication
11. Product number label
12. Indication
• Body ...................................... x1
• Case ....................................... x1
• Strap ...................................... x1
• Lithium battery (CR2) ..... x1
Composition
3
1
2
10
11
6
8
5
7
9
4
12
*The carabiner-like ring that comes with the case is for the purpose of carrying the Laser Rangender only.
Do not hang anything heavy on it, nor tug on it strongly. It cannot be used for climbing.

10
En
Fr
Es
Pt
￭Internal display
: Aim at the target you want to measure. Position the target at the center of the reticle.
: Appears while the laser is being irradiated for a measurement.
Do not look towards the objective lens side while this mark is shown.
: "Failure to measure" or "Unable to measure"
*Because the internal display of this product is enlarged by the eyepiece, dust may sometimes be seen.
This will not, however, affect the measurement accuracy.
Unit of measure (m/yd.)
Target mark
Laser irradiation mark
Battery condition
VR (Vibration Reduction) function-employing
model indication
Distance
First Target Priority mode Distant Target Priority mode
Horizontal distance mode

11
En
Fr
Es
Pt
[Functions]
■VR (Vibration Reduction) function
●ON and OFF
The VR (Vibration Reduction) function is activated concurrently when the Laser
Rangefinder is ON.
When the Laser Rangefinder is OFF, the VR (Vibration Reduction) function
automatically turns off.
■ Target priority mode (First Target Priority mode/Distant Target Priority mode)
This Nikon Laser Rangefinder employs the First Target Priority/Distant Target Priority switching system.
(Factory default setting is Distant Target Priority mode.)
When measuring overlapping subjects:
First Target Priority mode displays the distance of the closest subject and
Distant Target Priority mode displays that of the farthest subject.

12
En
Fr
Es
Pt
￭Inserting/Replacing battery
1. Type of battery
3V CR2 lithium battery x1
2. Inserting/Replacing battery
2-1. Open the battery chamber cover
Rotate the battery chamber cover counterclockwise and remove it. It may not open easily due to its rubber
packing for water resistance.
2-2. Insert the battery/Replace the old battery with a new one
Insert a new battery correctly positioned following the indication seal inside the chamber.
The [+] pole should be positioned toward the inside of the chamber. If the battery is not inserted correctly, the
Nikon Laser Rangefinder will not operate. When replacing the battery, remove the old battery then insert a new
one.
2-3. Close the battery chamber cover
Rotate the battery chamber cover clockwise to screw it into the body. It may not close easily due to the rubber
packing for water resistance, but continue to turn it all the way until it stops. Confirm that the cover is securely
closed.
3. Battery level indicator
*The battery condition mark in the internal display warns when the battery needs to be replaced.
Display Description
After power on, displays for 2 seconds only. Sufficient power available.
After power on, displays for 2 seconds only.
Power getting low.
Prepare to replace the battery.
Displayed continuously. Low. Battery should be replaced with a new one.
Blinks. After blinking 3 times, automatically
powers o.
Power exhausted.
Replace the battery.
[First step]

13
En
Fr
Es
Pt
[Mode settings]
■Operation overview
*Unoperated for 8 seconds or longer returns you to the standby
screen whichever setting mode is displayed.
Long press of MODE button
(1.5 seconds or more)
Standby Changing the distance display
unit (F1)
mYD
Short press of PWR button (less than 1.5
seconds) switches unit.
Short press of MODE button
(less than 1.5 seconds)
Long press of MODE button
(1.5 seconds or more) or
unoperated for 8 seconds or
longer returns you to the standby
screen whichever setting mode is
displayed.
Changing the measurement display
mode (F2)
Short press of PWR button (less than 1.5
seconds) switches mode.
Actual distance
mode
Horizontal
distance mode
Changing the target priority mode
(F3)
Short press of PWR button (less than 1.5
seconds) switches mode.
Distant Target
Priority mode
First Target
Priority mode
Short press of MODE button
(less than 1.5 seconds)
Short press of MODE button
(less than 1.5 seconds)

14
En
Fr
Es
Pt
■Changing the distance display unit (m/YD) (F1)
Factory default setting is yard (YD).
1. From standby, a long press (1 .5 seconds or more) of the MODE button displays
the setting menu of the distance display unit (F1).
2. Short press (less than 1.5 seconds) of the PWR button switches units of meter
and yard.
3. After setting, a short press (less than 1.5 seconds) of the MODE button
displays the setting menu of the measurement display mode (F2).
When setting is completed, a long press (1.5 seconds or more) of the MODE
button or unoperated more than 8 seconds returns you to standby.

15
En
Fr
Es
Pt
■ Changing the measurement display mode (F2)
Horizontal distance mode and actual distance mode can be switched.
Factory default setting is horizontal distance mode.
1. From standby, a long press (1 .5 seconds or more) of the MODE button, then a short
press (less than 1.5 seconds) of the MODE button displays the setting menu of the
measurement display mode (F2 ).
2. Short press (less than 1.5 seconds) of the PWR button switches the measurement
display mode.
3. After setting, a short press (less than 1.5 seconds) of the MODE button displays the
setting menu for target priority mode (F3).
When setting is completed, a long press (1.5 seconds or more) of the MODE button
or unoperated more than 8 seconds returns you to standby.
Displayed item differs according to the setting mode.
Horizontal distance mode Actual distance mode
N/A
Actual
distance
N/A
Horizontal
distance

16
En
Fr
Es
Pt
■Changing the target priority mode (F3)
This Nikon Laser Rangender employs the First Target Priority/Distant Target
Priority switching system.
Factory default setting is Distant Target Priority mode.
1. From standby, a long press (1.5 seconds or more) of the MODE button, then
a short press (less than 1.5 seconds) of the MODE button twice displays the
setting menu of the target priority mode (F3).
2. Short press (less than 1.5 seconds) of the PWR button switches the target
priority mode.
3. After setting, a long press (1.5 seconds or more) of the MODE button or
unoperated more than 8 seconds returns you to standby.
[First Target Priority mode/Distant Target Priority mode]
When measuring overlapping subjects:
First Target Priority mode displays the distance of the closest subject and
Distant Target Priority mode displays that of the farthest subject.

17
En
Fr
Es
Pt
[Measurement]
Caution — Controls, adjustments or usage of procedures other than those specified herein may
produce negative effects or damage to your health due to laser radiation.
■ Measuring
1. Turn on the power.
(Automatic power shut-off after approx. 8 seconds
unoperated.)
Immediately after power-on
2. Aim at the target.
Position the target at the center of the
target mark.
Standby
*Before measuring, be sure to confirm each mode setting.
*Please refer to each section on how to set each mode.
■ Adjusting diopter
Adjust the diopter to obtain a clear internal display in the viewfinder.
First, rotate the diopter adjustment ring counterclockwise until it comes to a complete stop.
Next, turn on the power and rotate the diopter adjustment ring back and forth until the internal display
comes into focus.
3. Pressing the PWR button starts measurement.
After measurement, the result is displayed for approx. 8 seconds, then power automatically turns off.
If you press the
PWR button during power-on, another measurement starts.

18
En
Fr
Es
Pt
Press and hold down the PWR button to start continuous measurement up to approx. 8 seconds.
During measurement, the measured result is displayed consecutively while the laser irradiation mark is
blinking. If you release your finger from the button, continuous measurement stops.
Example of measurement
failure
Example of measured
distance display
Pressing the PWR button once starts single measurement, then displays the results.
■Single measurement
■Continuous measurement
Single measurement
Press PWR button once
Press and hold down the PWR button Continuous measurement
Standby

19
En
Fr
Es
Pt
■Specifications
Model MONARCH 7i VR
Measurement system
Measurement range
(actual distance) 7.3-915 meters/8-1,000 yards
Distance display (increment) Every 0.1m/yd.
Optical system
Magnification (x) 6
Effective diameter of objective
lens (mm) 21
Angular field of view (real) (˚) 7.5
Eye relief (mm) 18.0
Exit pupil (mm) 3.5
Diopter adjustment ±4m
- 1
Others
Operating temperature (˚C/˚F) -10 — +50/14 — 122
Operating humidity (%RH) 80 or less (without dew condensation)
Power source CR2 lithium battery x 1 (DC 3V)
Automatic power shut-off (after approx. 8 sec. unoperated)
Dimensions (L x H x W) (mm/in.) 99 x 75 x 48/3.9 x 3.0 x 1.9
Weight (g/oz.) Approx. 200/7.1 (without battery)
Structure Waterproof (up to 1m/3.3 ft. for 10 minutes)*, fogproof Battery chamber is rainproof — JIS/IEC protection class 4 (IPX4) equivalent
(under Nikon's testing conditions)**
Electromagnetic compatibility FCC Part15 SubPartB class B, EU:EMC directive, AS/NZS, VCCI classB, CU TR 020
Environment RoHS, WEEE
[Technical notes]

20
En
Fr
Es
Pt
Model MONARCH 7i VR
Laser
Laser classification IEC60825-1: Class 1M/Laser Product
FDA/21 CFR Part 1040.10:Class I Laser Product
Wavelength (nm) 905
Pulse duration (ns) 9
Output (W) 20
Beam divergence (mrad) Vertical: 1.8, Horizontal: 0.25
*Waterproof models
This Nikon Laser Rangefinder is waterproof, and will suffer no damage to the optical system nor observation if submerged
or dropped in water to a maximum depth of 1 meter/3.3 feet for up to 10 minutes.
The Nikon Laser Rangefinder offers the following advantages:
• Can be used in conditions of high humidity, dust and rain without risk of damage to internal functions.
• Nitrogen-filled design makes it resistant to condensation and mold.
Observe the following when using the Nikon Laser Rangefinder:
• The unit is not a sealed structure, so it should not be operated nor held in running water.
• If any moisture is found on movable parts of this equipment, stop using it and wipe it off.
** The battery chamber is rainproof, not waterproof. Water may enter the device if the Rangefinder is submerged in water. If
water enters the battery chamber, wipe out any moisture and allow time for the chamber to dry.
Battery life
Continuous operation: Approx. 3,300 times (at approx. 20°C)
This figure may differ according to conditions such as temperature and other factors. Use only as a guide.
・The battery supplied with this Nikon Laser Rangefinder is for operation checking. Due to natural electrical discharge, the life of
this battery will likely be shorter than that noted above.
・If water enters the battery chamber due to submersion, dry the battery chamber well, then replace the battery.