Nikon COOLSHOT LITE User manual

En
Fr
Instruction manual/Manuel d’utilisation
Laser Rangefinder/Télémètre laser

2
En
Fr
English.................................................... 3
Français ................................................ 21

3
Fr
En
CONTENTS
English
Introduction
Read this First......................................................................4
SAFETY AND OPERATION PRECAUTIONS..................5
Getting to know the Laser Rangefinder
Key features..........................................................................8
Nomenclature/Composition..........................................9
Internal display ................................................................ 10
Functions
STABILIZED function ...................................................... 11
First Target Priority algorithm..................................... 11
LOCKED ON sign
(First Target Priority detection sign)......................... 11
Actual Distance Indicator............................................. 11
Inserting/Replacing battery
Type of battery................................................................. 12
Inserting/Replacing battery........................................ 12
Battery level indicator ................................................... 12
Changing the measurement display mode......... 13
Changing the distance display unit........................ 14
Measurement
Adjusting the focus of the internal display............ 15
Measuring.......................................................................... 15
Single measurement...................................................... 16
Continuous measurement........................................... 16
Technical notes
Specifications ................................................................... 17
Troubleshooting/Repair ............................................... 19
English

4
Fr
En
Introduction
Read this First
Thank you for purchasing the Nikon Laser Rangefinder.
Before using the product, read this manual thoroughly to ensure proper use.
After reading this manual, keep it in a readily accessible place for future reference.
llAbout the manual
• No part of the manual may be reproduced, transmitted, transcribed, stored in a retrieval system, or
translated into any language in any form, by any means, without Nikon’s prior written permission.
• Illustrations and display content shown in this manual may differ from the actual product.
• Nikon will not be held liable for any errors this manual may contain.
• The appearance, specifications, and capabilities of this product are subject to change without notice.
llAbout controls for radio interference
• This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired
operation.
• This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules and to EU EMC directive. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Consult the dealer or an experienced radio/TV technician for help.
Notice for customers in Canada
CAN ICES-3(B)/NMB-3(B)

5
Fr
En
SAFETY AND OPERATION PRECAUTIONS
Strictly observe the guidelines
contained in this manual in
order to use this product safely
and prevent possible injury or
property damage to you and
others. Understand the contents
thoroughly for correct use of the
product.
WARNING
This indicates that improper use by
ignoring the contents described
herein can result in potential death
or serious injury.
CAUTION
This indicates that improper use by
ignoring the contents described
herein can result in potential injury
or material loss.
SAFETY PRECAUTIONS (Laser)
This product uses an invisible laser
beam. Be sure to observe the
following:
WARNING
• Do not press the PWR button while
looking into the laser emission
aperture. You may damage your
eyes.
• Do not aim at eyes.
• Do not point the laser at people.
• Do not look at lasers with other
optical instruments such as lenses
or binoculars. You may damage
your eyes.
• When not measuring, keep your
fingers away from the PWR button
to avoid accidentally emitting the
laser.
• When not in use for an extended
period, remove the battery.
• Do not disassemble, remodel, or
repair the product. The laser
emission may be harmful to your
health. If the product is
disassembled, remodeled, or
repaired, it is no longer
guaranteed by the manufacturer.
• Store the product in a place out of
reach of children.
SAFETY PRECAUTIONS
(Monocular)
WARNING
• Never look directly at the sun,
intense light, or lasers while using
this product. It may seriously
damage the eyes or cause
blindness.
• Users of medical devices such as
cardiac pacemakers should not use
this product and its accessories.
Magnets built into the product
and accessories can cause medical
device malfunctions. Also, keep
credit cards and electronic media
away from this product and its
accessories. Recorded data may
get corrupted.
CAUTION
• Keep the plastic bag used to wrap
this product or other small parts
out of reach of children. The bag
may block their mouths and noses
and cause them to suffocate.
• Be careful of children inadvertently
swallowing small parts or
accessories. If children swallow
such parts, see a doctor
immediately.
• Turn off this product when not in
use.

6
Fr
En
• When carrying this product, store
it in the case.
• If this product fails to operate
correctly for any reason,
discontinue use immediately and
consult with a Nikon authorized
service representative.
• Do not leave this product in an
unstable place. It may fall and
cause injury or malfunction.
• Do not use this product while
walking. You may walk into
something or fall and cause injury
or malfunction.
• Do not swing this product by the
strap. You may hit others and
cause injury.
• The rubber parts of this product
(such as the eyecup) may
deteriorate if used or stored for a
long period of time. The
deteriorated rubber may attach on
clothes and cause stains. Check
their condition before use, and
consult with a Nikon authorized
service representative if a defect is
found.
• Using the rubber eyecup for
extended periods of time may
cause skin inflammation. If you
develop any symptoms, stop use
and see a doctor immediately.
PRECAUTIONS
(Lithium battery)
Incorrect use may cause the lithium
battery to rupture or leak, which will
corrode the device or stain your
hands and clothing.
Be sure to observe the following:
• Install the battery with the + and
– poles positioned correctly.
• Remove the battery when this is
depleted or will not be used for
extended periods.
• Keep the battery away from fire or
water. Never disassemble the
battery.
• Do not charge the lithium battery.
• Do not short the terminal of the
battery chamber.
• Do not carry the battery together
with keys or coins in a pocket or
bag. You may short the battery and
cause overheating.
• If liquid leaked from the lithium
battery comes into contact with
clothing or skin, rinse with plenty
of water. If it enters the eyes or
mouth, rinse with water and
consult a doctor immediately.
• When disposing of the lithium
battery, follow your local area
regulations.
HANDLING AND OPERATION
PRECAUTIONS
• Do not subject this product to
physical shock.
• If you accidentally apply strong
physical shock or drop the product
and suspect a malfunction, consult
with your local dealer or a Nikon
authorized service representative
immediately.
• Do not use the product
underwater.
• Wipe off any rain, water, sand, or
mud on the product as soon as
possible with a soft, clean cloth.
• When this product is exposed to
extreme temperature changes
(suddenly brought from a cold
place to a warm place or vice-
versa), the lens surfaces may get
cloudy. Do not use the product
until the cloudiness has
disappeared.
• Do not leave the product in a car
on a hot or sunny day, or near heat
generating equipment.

7
Fr
En
• Do not leave the
eyepiece in direct
sunlight. The
condenser effect of
the lens may
damage the internal
display surface.
CARE AND MAINTENANCE
PRECAUTIONS
LENS
Be careful that you do not directly
touch the lens surface with your
hands when cleaning it. Remove
dust or lint with a blower*. For
fingerprints or other stains that
cannot be removed with a blower,
wipe the lens with a dry soft cloth or
cleaning cloth for eyeglasses, using a
spiral motion that starts at the center
of the lens and working towards the
edges. Wiping too firmly or wiping
with a hard material may damage
the lens. If this fails, gently wipe the
lens using a cloth lightly dampened
with commercial lens cleaner.
MAIN BODY
After gently removing dust with a
blower, clean the body surface with a
soft, clean cloth. After use at a
seaside, wipe off salt that may be on
the body surface with a damp, soft,
clean cloth, and then wipe with a dry
cloth. Do not use benzene, thinner,
or other cleaners containing organic
solvents.
STORAGE
Water condensation or mold may
occur on lens surfaces because of
high humidity. Therefore, store the
product in a cool, dry place. After use
on a rainy day or at night, thoroughly
dry it at room temperature, then
store in a cool, dry place.
* A rubber cleaning tool that blows
air from a nozzle.
En Symbol for separate collection applicable
in European countries
This symbol indicates that this battery is
to be collected separately.
The following apply only to users in
European countries.
• This battery is designated for
separate collection at an appropriate
collection point. Do not dispose of as
household waste.
• For more information, contact the
retailer or the local authorities in
charge of waste management.
En Symbol for separate collection applicable
in European countries
This symbol indicates that this product is
to be collected separately.
The following apply only to users in
European countries.
• This product is designated for
separate collection at an appropriate
collection point. Do not dispose of as
household waste.
• For more information, contact the
retailer or the local authorities in
charge of waste management.

8
Fr
En Key features
• STABILIZED function is employed for reducing the
vibrations caused by hand movement
• Employs the First Target Priority algorithm that
makes a flagstick easy to measure
• LOCKED ON sign (First Target Priority detection
sign) is lit when measuring overlapping subjects
and the distance to the closest subject is displayed
• High-quality 6× finder with multilayer coating
• Larger ocular for easy viewing
• Switch between two measurement display modes
for the internal display: Golf mode (slope adjusted
distance (horizontal distance ± height) and actual
distance) and Actual distance mode
• Golf mode (default setting) displays the slope
adjusted distance (horizontal distance ± height)
which is useful for golf
• Built-in Actual Distance Indicator
• Press and hold down the PWR button to activate
the continuous measurement function (up to
approx. 8 seconds)
• Automatic power shut-off (approx. 8 sec.
unoperated from standby screen)
• Rainproof — JIS/IEC protection class 4 (IPX4)
equivalent (under Nikon’s testing conditions)
• Invisible/Eyesafe EN/IEC Class 1M Laser
llAbout measurement results
This device is a basic rangefinder. Its measurement results cannot be used as official evidence.
This product uses an invisible laser beam for
measuring. It measures the time the laser beam
takes to travel from the rangefinder to the target
and back. Laser reflectivity and measurement
results may vary according to climatic and
environmental conditions, as well as the color,
surface finish, size, shape and other
characteristics of the target.
Measurement may be inaccurate or fail in the
following cases:
• In snow, rain or fog
• Small or slender target
• Black or dark target
• Target has stepped surface
• Moving or vibrating target
• When measuring the surface of water
• Target measured through glass
• When the target is glass or a mirror
• When laser incidence to the target’s reflective
surface is oblique
Getting to know the Laser Rangefinder

9
Fr
En
Nomenclature/Composition
a
b87
6
5
4
3
2
0
9
1
c
Composition
• Body ×1
• Case ×1
• Lithium battery (CR2) ×1
1MODE button
2PWR button (POWER ON/Measurement
button)
36× monocular eyepiece
4Eyecup/Diopter adjustment ring
5Diopter index
6Strap eyelet
7Battery-chamber cover
8Battery-chamber cover “Open”indication
9Monocular objective lens/Laser emission
aperture
0Actual Distance Indicator
aInvisible laser detector aperture
bProduct number label
cIndication

10
Fr
En Internal display
1Actual distance (in Golf mode)*
: “Failed to measure”or “Unable to measure”
2Target mark
: Aim at the target you want to measure.
Position the target at the center of the mark.
3Unit of measure (m: meter/YD: yard)
4Distance
: “Failed to measure”or “Unable to measure”
5Battery level indicator
6Golf mode mark*
7Laser emission mark
: Appears while the laser is being emitted for a
measurement. Do not look towards the objective lens
side while this mark is shown.
8LOCKED ON sign (First Target Priority detection sign)
: When measuring overlapping subjects, and the
distance to the closest subject is displayed, this sign is
lit.
8
7
6
5
4
3
2
1
* For details, refer to“Changing the measurement display mode”.
• The internal display of this product is enlarged by the eyepiece. Although you may see dust that has
entered, it does not affect the accuracy of measurement.

11
Fr
En
STABILIZED function
llON and OFF
The STABILIZED function is activated concurrently when the Laser Rangefinder is ON.
When the Laser Rangefinder is OFF, the STABILIZED function automatically turns off.
First Target Priority algorithm
When measuring overlapping subjects, First Target Priority algorithm displays the distance to the closest
subject.
LOCKED ON sign (First Target Priority detection sign)
When measuring overlapping subjects, such as a flagstick with trees in the background, and the distance
to a closest subject is displayed, LOCKED ON sign (First Target Priority detection sign)* is lit in the
viewfinder.
*Single measurement: When measuring overlapping subjects and the distance to a closest subject is
displayed, the sign appears.
Continuous measurement: When displayed figures shift to a closer subject, the sign appears.
LOCKED ON sign (First Target Priority
detection sign) is lit.
Actual Distance Indicator
When the measurement display mode is set to Actual distance mode, the Actual Distance Indicator blinks
while the Laser Rangefinder is ON.
You can find out at a glance that the inclinometer function is not being used.
Functions

12
Fr
En Type of battery
3V CR2 lithium battery ×1
Inserting/Replacing battery
1. Open the battery-chamber cover.
Rotate the battery-chamber cover counterclockwise and remove it.
2. Insert the battery.
To replace the battery, take out the old battery before inserting a new one.
Follow the battery insertion mark inside the battery chamber to insert the + and - ends of the battery in
the correct orientation (insert the battery so that - is pointing outward). If the battery is not inserted
correctly, the Laser Rangefinder will not operate.
3. Attach the battery-chamber cover.
Rotate the battery-chamber cover clockwise and secure it firmly. When attaching the battery-chamber
cover, securely screw it all the way and check that it is secured.
• The battery-chamber cover may be difficult to rotate because this product uses a rubber seal to
maintain its water resistance capabilities.
Battery level indicator
Display Description
After power on, displays for 2 seconds only. Sufficient power available.
After power on, displays for 2 seconds only. Power getting low.
Prepare to replace the battery.
Displayed continuously. Low. Battery should be replaced with a new one.
Blinks. After blinking 3 times, automatically
powers off.
The battery is empty.
Replace the battery.
Inserting/Replacing battery

13
Fr
En
Switch between two modes (refer to the figure below) according to your golf
playstyle. The displayed information differs depending on the mode. Factory
default setting is golf mode.
1. Press the PWR button to turn on the Laser Rangefinder.
2. The measurement display mode switches every time you press the MODE
button.
Golf mode: Slope adjusted distance
(horizontal distance ± height) and actual distance Actual distance mode
Incline
Decline N/A
Actual
distance
Slope adjusted
distance
(horizontal distance
± height)
Actual
distance
N/A
• In Actual distance mode, the Actual Distance Indicator blinks.
• The setting is saved even when the Laser Rangefinder is turned OFF.
Changing the measurement display mode

14
Fr
En
Changing the distance display unit
For the display unit of the measurement results, select YD (yards) or m (meters). Factory default setting is
YD (yard).
1. Press the PWR button to turn on the Laser Rangefinder.
2. Press and hold the MODE button for at least 1.5 seconds, and release your finger
from the button when the distance display unit changes.
(yard) (meter)
• The setting is saved even when the Laser Rangefinder is turned OFF.

15
Fr
En
Measurement
Caution — Controls, adjustments or usage of procedures other than those specified herein may produce
negative effects or damage to your health due to laser radiation.
• Before measuring, confirm each menu setting by referring to“Changing the measurement display mode”
and“Changing the distance display unit”.
Adjusting the focus of the internal display
If the internal display is difficult to see, adjust the focus with the following
procedure.
1. Press the PWR button to turn on the power.
2. Look through the eyepiece and rotate the diopter adjustment ring until the
internal display comes into focus.
Diopter adjustment ring
Measuring
1. Press the PWR button to turn on the power.
• If you do not operate the button for about 8
seconds, the power turns off automatically.
2. Aim at the target.
Position the center of the target mark on the
target.
Immediately after power-on
Target mark
3. Press the PWR button to measure.
After measurement, the result is displayed for approx. 8 seconds, then power automatically turns off.
Press the PWR button while the power is on to measure again.

16
Fr
En Single measurement
Pressing the PWR button once starts single measurement, then displays the results.
Example of measured
distance display
Example of measurement
failure
Continuous measurement
Press and hold down the PWR button to start continuous measurement up to approx. 8 seconds. During
measurement, the measured result is displayed consecutively while the laser emission mark is flashing. If
you release your finger from the button, continuous measurement stops.
Standby
Continuous measurement
Press the PWR button once
Press and hold down
the PWR button
Single measurement
llWhen measuring a flagstick at a golf course
Keep targeting the flagstick at the center of the target mark with the continuous measurement function
to minimize the effects of hand shake.

17
Fr
En
Specifications
Measurement range (actual distance) 7.5-1,090 meters/8-1,200 yards
Distance display (increment)
Actual distance (upper): Every 1 m/yd.
Actual distance (lower): Every 0.5 m/yd.
Slope adjusted distance (lower): Every 0.2 m/yd.
Accuracy (actual distance)*1
±0.75 m/yd. (shorter than 700 m/yd.)
±1.25 m/yd. (700 m/yd. and over, shorter than 1,000 m/yd.)
±1.75 m/yd. (1,000 m/yd. and over)
Magnification (×) 6
Effective diameter of objective lens (mm) 21
Angular field of view (real) (˚) 7.5
Exit pupil (mm) 3.5
Eye relief (mm) 18.0
Diopter adjustment ±4 m-1
Dimensions (L × H × W) (mm/in.) 96 × 74 × 41/3.8 × 2.9 × 1.6
Weight (g/oz.) Approx. 170/6.0 (without battery)
Operating temperature (˚C/˚F) -10 — +50/14 — 122
Operating humidity (%RH) 80 or less (without dew condensation)
Power source CR2 lithium battery × 1 (DC 3V)
Automatic power shut-off (after approx. 8 sec. unoperated)
Structure Rainproof*2
Electromagnetic compatibility FCC Part15 SubPartB class B, EU:EMC directive, AS/NZS, VCCI classB,
CU TR 020, ICES-003
Environment RoHS, WEEE
Laser classification IEC60825-1: Class 1M/Laser Product
FDA/21 CFR Part 1040.10: Class I Laser Product
Wavelength (nm) 905
Technical notes

18
Fr
En Pulse duration (ns) 9.7
Output (W) 33.8
Beam divergence (mrad) Vertical: 0.25, Horizontal: 1.8
• The specifications of the product may not be achieved depending on the target object’s shape, surface texture and nature,
and/or weather conditions.
*1 Under Nikon’s measurement conditions.
*2 This product is equivalent to JIS/IEC protection class 4 (IPX4) (under Nikon’s testing conditions). This rating does not
guarantee the water resistance performance of the unit or that it will be free from damage or problems under all
conditions. Please observe the following when using:
• Do not operate or hold the product in running water.
• If any moisture is found on movable parts of this product, stop using the product and wipe it off.
Battery life
Approx. 2,400 times (at approx. 20°C (68°F))
This figure may differ according to conditions such as temperature and other factors. Use only as a guide.
• The battery supplied with this Nikon Laser Rangefinder is for operation checking. Due to natural electrical discharge, the
life of this battery will likely be shorter than that noted above.

19
Fr
En
Troubleshooting/Repair
If this product fails to function as expected, check the list below before consulting your local dealer or the
store where you purchased it.
llIf there is a problem with the product.
Problem Cause/Solution
• Does not turn on
• Press the PWR button (top of the body).
• Check that the battery is inserted correctly.
• Replace the battery with a new one.
• Unable to measure
• Anomalous result
• Confirm the settings.
• Confirm if it can measure a large target close to you (example: a building
approx. 15 m/yd. ahead of you).
• Clean the lens surface if necessary.
• Do not know if STABILIZED
function is working
• Compare the vibration of the target in the viewfinder when the Laser
Rangefinder is ON and OFF.
• While the Laser Rangefinder is ON, the STABILIZED function is always activated.
• Cannot turn off the STABILIZED
function
• The STABILIZED function is activated concurrently when the Laser
Rangefinder is ON. When the Laser Rangefinder is OFF, the STABILIZED
function automatically turns off.
• The STABILIZED function cannot be turned on or off manually.
• There are minute motion sounds
when the power turns on and off
• Due to the STABILIZED system motor, minute motion sounds occur.
These sounds are normal, please continue to use the Laser Rangefinder.
• There are sounds from the inside
when the body is shaken while
the power is off
• The stabilizing mechanism moves inside. These sounds are normal.
These sounds do not occur when the power is on, even if the body is
shaken.
• [ ] is displayed in the internal
display
• Failure indication. Please contact your local dealer or the store where you
purchased the product.

20
Fr
En llIf you require a repair, please contact your local dealer or the store where you purchased the product.
Do not repair or disassemble. It may result in a serious incident.
Please note that Nikon is not responsible for any direct or indirect damage if the user attempts to repair or
disassemble the product.
llAbout performance parts for repair and the repairable period
The repairable period is within the holding period of performance parts for repair (parts necessary to
maintain performance). In some cases, repairs may be possible even after the parts holding period has
passed, so please contact a Nikon service organization, the store where you purchased the product, or
your nearest dealer. In addition, if the product is found to be completely damaged due to malfunction or
damage caused by submersion, fire, or dropping, it cannot be repaired even within the holding period.
Evaluation of the degree of failure or damage is at the discretion of the Nikon service organization.