Nilfisk-Advance SC351 User manual

SC351 How To
Prepare for use
1
Unplug battery
charger.
2
Wrap cord accordingly.
3
Inspect squeegee,
brushes or pads then
install.
4
Fill machine with
appropriate solution
(temperature should not exceed
130°F).
5
Inspect ball float cage.
6
Lower recovery tank lid.
7
Get familiar with the
control panel.
8
Enable push-button and
lever to engage
brush/pad holder then
release.
9
Turn machine on.
10
Choose program for the
type of work to be
performed.
11
Press the solution flow
control switch.
12
Begin scrubbing.

SC351 How To
Store the Machine
1
Empty recovery tank
and solution tank.
2
Rinse and wash
recovery tank with
clean water.
3
Inspect and wash,
vacuum grid and
automatic shut-off float.
4
Take squeegee off and
remove debris.
5
Inspect squeegee, rinse
and replace if needed.
6
Remove, clean and
inspect brush or pad.
Rinse with warm water.
Hang to dry. Replace if
needed.
7
Charge batteries.
8
Wipe exterior of
machine with a damp
cloth.
9
Lift recover tank lid to
allow inside of the tank
to dry.

SC351 How To
Daily, Weekly and Occasional Maintenance
1
Clean brush daily.
2
Clean squeegee daily
by removing debris.
3
Check each battery
cell’s water level (does
not apply to gel
batteries). Charge
batteries daily.
4
Clean tank and vacuum
grid daily.
5
Perform squeegee
blade check and/or
replacement weekly.
6
Screw and nut
tightening check.
Perform this task after
the first 8 hours of
operation.
7
Brush deck rubber pad
check and/or
replacement
8
Brush deck end-of-
stroke cable check
and/or replacement
yearly.
9
Brush deck rubber
flange check and/or
replacement yearly.
Every 6 Months