
Meteor
6Original Instructions
EN
3.5 Changing the exhaust lter
Open the cover for the exhaust lter, as seen in the over-
view image (page 2), replace the lter with a new one and
close the cover again.
3.6 Washing/exchanging the HEPA lter
You will have access to the HEPA lter when you have
released the dust container.
Rinse the inside of the lter using lukewarm tap water. Do
not use any cleaning agents and avoid touching the lter
surface. Tap the lter to remove the excess water. Make
sure to let the lter dry before putting it back into the vacuum
cleaner.
If necessary, exchange the lter.
Please note that the machine will not function without a
HEPA lter.
3.7 Parking the tube and nozzle
There are two grooves for parking. One located on the
underside to use when machine stands on the back, and the
other on the back to use when the machine is standing on
the wheels.
3.8 Thermal fuse
The machine is tted with a thermal fuse, which prevents
the machine from overheating. If the thermal fuse blows, the
machine automatically switches o the motor and must cool
before it can be started again.
Restart
1. Turn o the machine and unplug from the wall socket.
2. Make sure that nothing blocks the air ow through the
bent tube, hose, tube, nozzle or lters.
3. Let the machine cool.
4. Plug in the machine again and push the start button. The
machine will not start until cool enough. If the machine
does not start turn it o and unplug. Try again in a while.
4. Cleaning tips
Adjust the suction power by means of the power regulation
or the sliding valve on the bent tube.
Upholstery nozzle (13)
Use the upholstery nozzle for upholstered furniture.
Brush nozzle (14)
Use the brush nozzle for curtains and window sills.
Hard oor nozzle (15)
Use the nozzle for hard oors.
Combination nozzle (16)
Adjust the combination nozzle depending on type of oor.
Crevice nozzle (17)
Use the crevice nozzle for narrow spaces.
Turbo nozzle (18)
Use the turbo nozzle for ecient carpet cleaning.
Mini turbo nozzle (19)
Use the mini turbo nozzle to remove pet hairs and similar
from upholstery and furniture
The models can include dierent nozzles.
5. Trouble-shooting
Repair or service of electrical components such as cable
or motor, must only be carried out by an authorized service
center.
If the machine
does not start
Check that the plug is correctly tted
to the wall socket.
A fuse in the building may have blown
and needs to be changed.
The cable or plug may be damaged
and must be repaired by an authorized
service center.
Reduced suc-
tion power
The dust container may be full and
needs to be emptied, see instructions.
The HEPA lter may be blocked and
has to be washed/exchanged, see
instructions.
The bent tube, hose, tube or nozzle
may be blocked and needs to be
cleaned.
If the machine
stops
The thermal fuse may have blown, see
instructions.
6. Service and Maintenance
• Store the machine indoors and in a dry environment.
• Clean the machine surface with a dry cloth or a damp
cloth with a little cleaning agent.
• Order original accessories from a local dealer.
• Service – contact your local dealer.
7. Guarantee and Service
Nilsk vacuum cleaners for domestic use are guaranteed for
2 years from the date of purchase.
The guarantee covers the motor, cable rewinder, switch and
casing. The nozzles, lters, hoses, tubes and other acces-
sories are covered twelve months due to manufacturing fault
only and the guarantee excludes wear and tear.
The guarantee includes spare parts and labour costs, and
covers manufacturing and material defects that may occur
during normal domestic use.
Service under the guarantee will only be performed if it
can be proven that the defect occurred within the product’s
guarantee period (a correctly completed guarantee
certicate or printed/stamped cash register receipt with date
and product type) and on the condition that the vacuum
cleaner was bought as a new product and distributed by
Nilsk. Equipment defects covered by this warranty will be
repaired or replaced by one of the service centres of the
Nilsk organisation.
Packing and postage/carriage is not covered by the
warranty. Upon completion of any repairs necessary, the
vacuum cleaner will be returned to the customer at the risk
and expense of Nilsk.