Ningbo Fiercer Leopard Electrical Appliance Co., Ltd. S-1801 User manual

Name: Ningbo Fiercer Leopard Electrical Appliance Co., Ltd.
Address: No.1&2 Wanghai Road (Wanghai Industrial Area), Xidian town, 315611 Ninghai, Ningbo, PEOPLE'S
REPUBLIC OF CHINA
S-1801 Camera sensor wall light manual
Connecting way of camera:
1、Scan the QR code and automatically enter the application store to
download the corresponding version of Kalay software and install it
successfully.
Android ios
2、In the phone settings, click on WLAN or WIFI, select the network
with 21 digits plus letters, and connect it. (Open the light)
3、Open the Kalay, click the“+”, then chose the“IPCam”. Chose

Name: Ningbo Fiercer Leopard Electrical Appliance Co., Ltd.
Address: No.1&2 Wanghai Road (Wanghai Industrial Area), Xidian town, 315611 Ninghai, Ningbo, PEOPLE'S
REPUBLIC OF CHINA
the “Not been connected to the router”. Then turn to"Add Device
Page", enter "123" in the device password, click the "√" symbol on
the right .

Name: Ningbo Fiercer Leopard Electrical Appliance Co., Ltd.
Address: No.1&2 Wanghai Road (Wanghai Industrial Area), Xidian town, 315611 Ninghai, Ningbo, PEOPLE'S
REPUBLIC OF CHINA
4、Now, the camera has been successfully connected. Next, let the
camera connect to the Internet. Turn to“WiFi Network”page，please
chose available and stable wifi, enter the password of wifi, connect
the wifi successfully.

Name: Ningbo Fiercer Leopard Electrical Appliance Co., Ltd.
Address: No.1&2 Wanghai Road (Wanghai Industrial Area), Xidian town, 315611 Ninghai, Ningbo, PEOPLE'S
REPUBLIC OF CHINA
5、On the Kalay software main page, click to select the camera,
prompt "the current device password is not safe, please modify, thank
you", click "OK" below - -> On the "Change Password" page, change
the password and select "Yes" --> prompt "Congratulations! The
password has been updated successfully", click "OK" --> Settings
successfully, you can start using the camera.
.

Name: Ningbo Fiercer Leopard Electrical Appliance Co., Ltd.
Address: No.1&2 Wanghai Road (Wanghai Industrial Area), Xidian town, 315611 Ninghai, Ningbo, PEOPLE'S
REPUBLIC OF CHINA
6、Click the “speaker”button, you can hear the sound from the
camera. Click the“microphone”, you can talk to someone around the
camera.

Name: Ningbo Fiercer Leopard Electrical Appliance Co., Ltd.
Address: No.1&2 Wanghai Road (Wanghai Industrial Area), Xidian town, 315611 Ninghai, Ningbo, PEOPLE'S
REPUBLIC OF CHINA
7、Install the corresponding version of Kalay software in the new
mobile phone, and set the mobile WiFi network to the same WiFi
network of the camera. Open the kalay software and click the "+"
sign below -> "Network Camera" -> "Add New Connected On the
router device --> local search page, the camera light added in step 3
appears automatically, and the network IP address is displayed below.
Click the camera --> Add device page, enter the camera password in
the device password -- > The camera is added successfully.

Name: Ningbo Fiercer Leopard Electrical Appliance Co., Ltd.
Address: No.1&2 Wanghai Road (Wanghai Industrial Area), Xidian town, 315611 Ninghai, Ningbo, PEOPLE'S
REPUBLIC OF CHINA
Operation of light
Installation
Must be installed by a qualified person
Loosen the screw at the back of the light and remove the wall
bracket.
Drill two mounting holes in the wall bracket using an appropriately
sized drill bit for mounting screws

Name: Ningbo Fiercer Leopard Electrical Appliance Co., Ltd.
Address: No.1&2 Wanghai Road (Wanghai Industrial Area), Xidian town, 315611 Ninghai, Ningbo, PEOPLE'S
REPUBLIC OF CHINA
Hold the wall bracket against the surface it is to be mounted onto and
screw it in place using 2 mounting screws.
Note: if the mounting surface requires the use of wall plugs (e.g.brick
or concrete)or pre-drilling(e.g. hard wood),first mark and drill pilot
holes in the wall using the wall bracket as a template.
Normal working temperature range: -40 to +80°C;
Normal working voltage range: 100-240Vac; 50/60Hz;
Degree of Protection: IP44 suitable for indoor and outdoor use;
The products with non-user replaceable light source - light source
which can only be replaced by the manufacturer, his service agent, or
similar qualified person
Restoring the factory settings
In order to restore the factory settings (for example in order to reset
the default and automatic camera connection with Wi-Fi network after
first configuration in Kalay app) hold down the reset button (figure
below) using, for example, a small screwdriver or other tool for a few
seconds until you hear a short sound signal.

Name: Ningbo Fiercer Leopard Electrical Appliance Co., Ltd.
Address: No.1&2 Wanghai Road (Wanghai Industrial Area), Xidian town, 315611 Ninghai, Ningbo, PEOPLE'S
REPUBLIC OF CHINA
Notes about installation and usage
1. It is forbidden to install the device with visible damage on the casing
or on the power cord.
2. During the installation, make sure to disconnect the power supply
and keep health and safety rules.
3. A correctly installed device can be only connected to an efficient
electrical installation.
4. Works related to electrical connection should be performed by a
specialist with an appropriate electrical
permissions.
5. It is necessary to respect the correct connection of the power cord.
Improper connection may result in

Name: Ningbo Fiercer Leopard Electrical Appliance Co., Ltd.
Address: No.1&2 Wanghai Road (Wanghai Industrial Area), Xidian town, 315611 Ninghai, Ningbo, PEOPLE'S
REPUBLIC OF CHINA
permanent damage to the device (see wiring diagram below).
6. In order to ensure optimal heat dissipation, the camera must not be
covered with any material.
7. Installation must be done directly on a normally flammable
substrates (i.e. the one whose ignition
temperature is at least 200°C, which does not deform and does not
soften at this temperature, e.g. wood and wood-based materials with a
thickness above 2mm) or non-flammable (i.e. that does not maintain
smoking, e.g. metal, gypsum, concrete).
8. Technical changes reserved.
9. Keep this instruction.
10.The Camera sensor wall light complies with FCC RF radiation
exposure limits set forth for an uncontrolled

Name: Ningbo Fiercer Leopard Electrical Appliance Co., Ltd.
Address: No.1&2 Wanghai Road (Wanghai Industrial Area), Xidian town, 315611 Ninghai, Ningbo, PEOPLE'S
REPUBLIC OF CHINA
environment. Caution: To maintain the compliance with the FCC’s
RF exposure guideline, install the Robotic Vacuum Cleaner at least 7.9”
(20 cm) from ALL persons. The
transmitter of this device must not be co-located or operating in
conjunction with any other
antenna or transmitter.

Name: Ningbo Fiercer Leopard Electrical Appliance Co., Ltd.
Address: No.1&2 Wanghai Road (Wanghai Industrial Area), Xidian town, 315611 Ninghai, Ningbo, PEOPLE'S
REPUBLIC OF CHINA

Name: Ningbo Fiercer Leopard Electrical Appliance Co., Ltd.
Address: No.1&2 Wanghai Road (Wanghai Industrial Area), Xidian town, 315611 Ninghai, Ningbo, PEOPLE'S
REPUBLIC OF CHINA
Operation

Name: Ningbo Fiercer Leopard Electrical Appliance Co., Ltd.
Address: No.1&2 Wanghai Road (Wanghai Industrial Area), Xidian town, 315611 Ninghai, Ningbo, PEOPLE'S
REPUBLIC OF CHINA
The light has 2 different control dials which allow you to adjust the
settings these control dials can be located underneath the motion
detector head.
Sensitivity to light(LUX)
The light duration once motion has been detected(Time)
LUX: This is the level of darkness reached before the light turn on. If set to maximum
level, the light will turn on in most situations ranging from dusk to daylight. If set to
minimum level, the light will turn on in the dark. This is the most ideal position for general
evening and night operation.
Time: This dial will set the duration of the time the light will stay illuminated for after
motion has been detected. The time can be adjusted from 3 seconds to 7 minutes. Rotating
the dial clockwise will extend the time the lamp is illuminated.
（FCC warning:
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:

Name: Ningbo Fiercer Leopard Electrical Appliance Co., Ltd.
Address: No.1&2 Wanghai Road (Wanghai Industrial Area), Xidian town, 315611 Ninghai, Ningbo, PEOPLE'S
REPUBLIC OF CHINA
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Modification: Any changes or modifications not expressly approved by the grantee of this
device could void the user’s authority to operate the device.