Ninja BL642W User manual

www.ninjakitchen.com
®
HELP
LINE
1-877-646-5288
®
BL642W
OWNER’S GUIDE

21-877-646-5288
IMPORTANT SAFETY INSTRUCTIONS
For Household Use Only
WHEN USING ELECTRICAL APPLIANCES,
BASIC SAFETY PRECAUTIONS SHOULD
ALWAYS BE FOLLOWED, INCLUDING THE
FOLLOWING:
READ ALL INSTRUCTIONS BEFORE
USING YOUR NUTRI NUTRI NINJA®
| NINJA®BLENDER WITH AUTO-iQ™
TECHNOLOGY.
POLARIZED PLUG
WARNING: To reduce the risk of electric
shock, this appliance has a polarized plug
(one blade is wider than the other). This plug
will fit into a polarized outlet only one way.
If the plug does not fit fully into the outlet,
reverse the plug. If it still does not fit, contact
a qualified electrician to install the proper
outlet. DO NOT modify the plug in any
way.
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK
OR INJURY:
1 To protect against electrical shock, do not
submerge the appliance or allow the power
cord to come into contact with water or any
other liquid.
2 DO NOT allow young children to operate the
appliance or use as a toy. Close supervision
is necessary when any appliance is used by
or near children.
3 Never leave an appliance unattended when in
use.
4 Turn the appliance Off and remove the power
cord from the electrical outlet when not in
use, before assembling or disassembling
parts and before cleaning. To unplug, grasp
the plug and pull from the electrical outlet.
Never pull from the power cord.
5 DO NOT abuse the power cord. Never carry
the appliance by the power cord or yank it
to disconnect from electrical outlet; instead
grasp the plug and pull to disconnect.
6 DO NOT operate any appliance with a
damaged cord or plug, or after the appliance
malfunctions, has been dropped or damaged
in any manner. This appliance has no
serviceable parts. Return the appliance to
EURO-PRO Operating LLC for examination,
repair or adjustment.
7 DO NOT let the power cord hang over
the edge of table or counter or touch hot
surfaces such as the stove.
8 Always use appliance on a dry, level surface.

3
www.ninjakitchen.com
21 DO NOT overfill.
22 Never feed food by hand. Always use the
food pusher.
23 DO NOT operate the appliance empty.
24 To reduce the risk of burns, always allow the
appliance to cool before taking off parts and
before cleaning.
25 In the event that the unit overloads, the
control panel lights will flash and the unit
will shut down. Unplug the appliance and let
it cool down for approximately 15 minutes
before using again.
26 THIS PRODUCT IS INTENDED FOR
HOUSEHOLD USE ONLY. Do not use this
appliance for anything other than its intended
use. Do not use outdoors.
27 The maximum rating is based on the 6-Blade
Assembly (pitcher) that drives the greatest
power and other recommended attachments
may draw significantly less power or current.
WARNING: Extension cords are
not recommended for use with this
product.
SAVE THESE
INSTRUCTIONS
9 Keep hands, hair, clothing, as well as
utensils out of container while processing to
reduce the risk of severe injury to persons
or damage to the appliance. A scraper may
be used but only when the appliance is not
running.
10 CAUTION: Blade assemblies are sharp and
removable, handle with care. When handling
the blade assemblies, always hold by the
shaft.
11 Avoid contact with moving parts.
12 DO NOT attempt to sharpen blades.
13 DO NOT use the appliance if blade assembly
is bent or damaged.
14 To reduce risk of injury, never place the blade
assembly on base without pitcher or bowl
properly attached.
15 DO NOT operate this appliance on or near
any hot surfaces (such as gas or electric
burner or in a heated oven).
16 The use of attachments or accessories
including canning jars, not recommended by
the manufacturer may result in fire, electric
shock or personal injury.
17 DO NOT remove the container from the
motor base while the appliance is in
operation.
18 To reduce the risk of injury, NEVER operate
the appliance without the lid in place; DO
NOT try to defeat the interlock mechanism;
make sure that the attachment is properly
installed before operating the appliance.
19 DO NOT expose containers to extreme
temperaturechanges.
20 CAUTION: DO NOT BLEND HOT LIQUIDS.

41-877-646-5288
THIS BOOK COVERS MODEL NUMBERS:
BL642W 30
TECHNICAL SPECIFICATIONS
Voltage: 120V~, 60Hz.
Power: 1500 Watts
Pitcher Capacity: 72 ounces (9 cups, 2.1 L)
64 liquid ounces (8 cups, 1.9 L)
Nutri Ninja®Cup Capacity: 18 ounces (2 cups, 500 mL)
24 ounces (3 cups, 700 mL)
32 ounces (4 cups, 950 mL)
Euro-Pro, Auto-iQ, Nutri Ninja, Pro Extractor Blades
and Ninja are trademarks of Euro-Pro Operating LLC.

5
www.ninjakitchen.com
Contents
Thank you for
purchasing the
Nutri Ninja®|
Ninja® Blender
with Auto-iQ™
Technology.
Getting to Know Your Nutri Ninja®| Ninja® Blender with Auto-iQ™Technology.....................6
Using the Nutri Ninja®| Ninja® Blender with Auto-iQ™Technology .....................................8
Assembly and Use for the Ninja®Blender ........................................................................9
Assembly and Use for the Nutri Ninja® Cups ..................................................................11
Programs, Speed Settings, & Uses ................................................................................12
Care & Maintenance ....................................................................................................13
Troubleshooting Guide..................................................................................................14
Replacement Parts.......................................................................................................14
Warranty & Registration................................................................................................15

61-877-646-5288
Getting To Know Your Nutri Ninja®| Ninja® Blender
with Auto-iQ™Technology
f Silicone Grip Sleeve (x3)
gBlender Pitcher
hBlender Lid with locking handle
i Stacked Blades (blender)
aJumbo Multi Serve 32 oz. Nutri
Ninja®Cup
bRegular 24 oz. Nutri Ninja®Cup
cSmall 18 oz. Nutri Ninja®Cup
dPro Extractor Blades™
eSip & Seal™Lids (x3)
jMotor Base
d
c
ef
a
h
j
b
g
i
NOTE: Blades are not
interchangeable.

7
www.ninjakitchen.com
Nutri Ninja®| Ninja® Blender with Auto-iQ™Technology Features:
• Patent Pending Ninja™Blade Technology
• BPA Free Blender Pitcher, Nutri Ninja®Cups and Lids
• Total Crushing™Technology
• Drip-Free Pour Spout
• LED Control Panel with Timer
• Sturdy, Non-Slip Base
• Smart Lid technology for easy release
• 3 speeds: Low, Medium, & High
• 5 Auto-iQ™Programs - Auto-iQ™Frozen Drinks/Smoothies, Auto-iQ™Puree, Nutri Ninja®Auto-iQ™Blend, Nutri Ninja®
Auto-iQ™Ultra Blend and Auto-iQ™Pulse
• Nutri Ninja®Nutrient & Vitamin Extraction
The Nutri Ninja®| Ninja® Blender with Auto-iQ™Technology is a professional, high powered innovative tool with a sleek
design and outstanding performance, a true asset to any kitchen. The Nutri Ninja®| Ninja® Blender with Auto-iQ™
Technology features intelligent programs that combine unique pulsing, blending and pausing patterns that do the work
for you! Get great results every time with no guesswork required! For best results, be sure to carefully read all the
instructions contained in the manual before using this appliance.

81-877-646-5288
Using the Nutri Ninja®| Ninja® Blender with Auto-iQ™Technology
CAUTION: Blade assemblies are sharp and
removable, handle with care. When handling the
blade assemblies, always hold them by the shaft.
BEFORE FIRST USE
1Remove all packaging material and labels from the
appliance.
2Wash the lids, blender pitcher, Nutri Ninja®cups and
blades in warm, soapy water with a soft cloth. Use
caution when washing the blade assemblies as
the blades are very sharp.
3Rinse and dry thoroughly.
4The blender pitcher, Nutri Ninja®cups, lids and blades,
are all dishwasher safe. It is recommended that the lids
and blades be placed on the top rack. Ensure that the
blades are removed from the containers before placing in
the dishwasher.
5Wipe the motor base clean with a damp cloth.
PLEASE KEEP THESE IMPORTANT
SAFEGUARDS IN MIND WHEN USING THE
APPLIANCE:
IMPORTANT: Never add ingredients into the
container before placing the blade in first.
IMPORTANT: Blades are not interchangeable.
IMPORTANT: DO NOT attempt to operate the
appliance without the lid on.
IMPORTANT: Never run the appliance empty.
CAUTION: DO NOT PROCESS HOT FOODS OR
HOT LIQUIDS.
CAUTION: Never remove the container while the
appliance is still running.
WARNING: Never leave the appliance unattended
while in use.
CAUTION: If using
the pour spout,
ensure the lid
is fully locked
onto the blender
pitcher.
CAUTION: If
pouring with
the lid removed,
ALWAYS remove
the blade
assembly first.

9
www.ninjakitchen.com
Assembly and Use for the Blender
Use caution when handling the blade assemblies
as the blades are very sharp.
WARNING: Never leave the appliance unattended while
in use.
IMPORTANT: Make sure that the motor base is
plugged in for use.
1Holding the Stacked Blade Assembly by the top of the
shaft, place it onto the drive gear inside the pitcher.
Ensure that the attachment is seated properly and is
standing upright. (Fig. 1)
NOTE: The blade will fit loosely on the drive gear.
2Place the motor base on a clean, dry, level surface such
as a counter or table top.
3 Align and lower the Pitcher onto the motor base.
(Fig. 2) Handle should be aligned slightly to the right
of the “LOCK” symbol on the motor base.
4Rotate the pitcher clockwise until it locks in place, you
will hear a click when the lock is engaged. (Fig. 3)
5The pitcher can be placed on the motor base two ways;
the handle can be on the front right corner or the front
left corner. (Fig. 4a, Fig. 4b)
6Add the ingredients to the pitcher, making sure that
they do not exceed the highest measured marking line
on the side of the pitcher.
NOTE: When blending any kind of liquids, such as
mixtures of any drinks or smoothies, do not exceed the
“Max Liquid” mark (64 ounces) on the pitcher.
NOTE: If you need to add additional ingredients while
the appliance is processing, open the pour spout cap
and pour the ingredients in through the opening.
7Holding the lid by the handle in the upright position, place
it on top of the pitcher aligning the triangle ( ) located
on the lid with the triangle ( ) located on the pitcher’s
handle. (Fig. 5a) Press the handle down until you hear
a click. The triangles on the lid and the blender handle
MUST be aligned in order for the blender to turn on.
(Fig. 5b)
8Plug the power cord into the electrical outlet and press
the power button ( ).
NOTE: As a safety feature, the power light
( ) will flash and the motor will not work if the
pitcher and lid are not installed correctly. When
the pitcher and lid are installed properly, the
power light ( ) will be solid, indicating that the
appliance is ready for use.
ASSEMBLY
HIGH PULSE
LOW DOUGH
SMOOTHIE
SINGLE
SERVE
PUREE FROZEN
BLENDING
FROZEN DRINKS
SMOOTHIES
PUREE
PULSE
HIGH
MED
LOW
AUTO
AUTO
AUTO
HIGH PULSE
LOW DOUGH
SMOOTHIE
SINGLE
SERVE
PUREE FROZEN
BLENDING
FROZEN DRINKS
SMOOTHIES
PUREE
PULSE
HIGH
MED
LOW
AUTO
AUTO
AUTO
Fig. 2
Fig. 5a
Fig. 4a
HIGH PULSE
LOW DOUGH
SMOOTHIE
SINGLE
SERVE
PUREE FROZEN
BLENDING
FROZEN DRINKS
SMOOTHIES
PUREE
PULSE
HIGH
MED
LOW
AUTO
AUTO
AUTO
Fig. 4b
Fig. 1 Fig. 3
Fig. 5b

10 1-877-646-5288
WARNING: Never leave the appliance unattended while
in use.
NOTE: Nutri Ninja®| Ninja® Blender with Auto-iQ™
Technology can sense which jar is on the motor base.
The available function lights will illuminate depending
on which jar is placed on the motor base. (Fig. 6)
9Press the power button to turn on the unit. Select
the speed or Auto-iQ™program that best suits your
needs. The Auto-iQ™program will stop the appliance
automatically at the end of the program. (Fig. 7)
NOTE: Pulse ingredients for even chopping by
holding the Auto-iQ™Pulse button until your desired
consistency is reached.
10 To pause the appliance, press the selected speed or
Auto-iQ™program a second time. When the program is
paused, the light on the program button will flash until
you press it again to resume the rest of the program.
11 When you have reached your desired consistency, stop
the appliance by pressing the power button ( ) and
wait for the blade to stop turning. (Fig. 8)
Assembly and Use for the Blender - cont.
Fig. 8
USE
REMOVAL
Fig. 6
Fig. 9
AUTO
Fig. 7 Fig. 10
12 Turn the pitcher counter clockwise to remove and then
lift off the base. (Fig. 9)
CAUTION: Never insert your hands in the pitcher as the
blades are sharp. Always use a spatula to dislodge food
that has stuck to the sides of the pitcher.
CAUTION: If using the pour spout, ensure that the lid is
fully locked onto the blender pitcher.
CAUTION: If pouring with the lid removed, ALWAYS
remove the blade assembly first before pouring.
13 Depending on the consistency of the contents in the
container, open the pour spout cap and use the spout
to empty liquid contents.
14 For thicker consistencies, remove the lid and blade
attachment carefully (by its shaft), then empty contents
from the container. To remove the lid, press the release
button on the lid and pull the lid handle up to a 90°
angle ands lift the lid off the blender pitcher. (Fig. 10)
15 Make sure that the unit is unplugged when not in use.

11
www.ninjakitchen.com
NOTE: Nutri Ninja®| Ninja® Blender with Auto-iQ™
Technology can sense which jar is on the motor base.
The available function lights will illuminate depending
on which jar is placed on the motor base. (Fig. 1)
WARNING: Never leave the appliance unattended while
in use.
IMPORTANT: Make sure that the motor base is
plugged in for use.
1Place the motor base on a clean, dry, level surface such
as a counter or table top.
2Add ingredients to the Nutri Ninja®cup.
3Place the Pro Extractor Blades™onto the cup and tightly
screw it on clockwise until you have a good seal. (Fig. 2)
4Turn the Nutri Ninja®cup upside down and place it
onto the motor base, aligning the tabs on the cup with
the motor base. Rotate the Nutri Ninja®cup clockwise
until it locks in place, you will hear a click when the
lock is engaged. (Fig. 3)
Fig. 2 Fig. 3
Assembly and Use for the Nutri Ninja®Cups
Fig. 4 Fig. 5 Fig. 6
ASSEMBLY USE REMOVAL
5Press the power button on, and select the speed
or Auto-iQ™program that suits your needs.
(Fig. 4) The Auto-iQ™program will stop the appliance
automatically at the end of the program.
6To pause the appliance, press the selected speed or
Auto-iQ™program a second time. When the program is
paused, the light on the program button will flash until
you press it again to resume the rest of the program.
7Once you have reached your desired consistency, stop the
appliance by pressing the power button and wait for the
blade to stop turning. Turn the Nutri Ninja®cup counter-
clockwise and pull straight up to remove. (Fig. 5, Fig. 6)
NOTE: Do not overfill! To avoid spilling, do not add
ingredients past the “Max Liquid” line.
8Turn the cup upright and remove the Pro Extractor
Blades™by twisting the Pro Extractor Blades™counter
clockwise.
9Place the Sip & Seal™lid onto the Nutri Ninja®cup,
twist to seal and enjoy!
10 Make sure that the motor base is unplugged when
not in use.
Use caution when handling the blade assemblies as the blades are very sharp.
AUTO
Fig. 1

12 1-877-646-5288
Programs, Speed Settings & Uses for the Blender Pitcher
FUNCTION CONTAINER BLADE
TYPE
SPEED or
PROGRAM TYPE OF FOOD
Processing Blender Pitcher Stacked Blade Auto-iQ™Puree
Medium
Dips
Batters
Chopping Blender Pitcher Stacked Blade Auto-iQ™Pulse
High
Salsa
Vegetables
Nuts
Frozen Drinks /
Ice Crush Blender Pitcher Stacked Blade Auto-iQ™Frozen Drinks/
Smoothies
Ice
Frozen Drinks
Pureeing Blender Pitcher Stacked Blade Auto-iQ™Puree
Smoothies
Soups
Milkshakes
Programs, Speed Settings & Uses for the Nutri Ninja®Cup
FUNCTION CONTAINER BLADE
TYPE
SPEED or
PROGRAM TYPE OF FOOD
Smoothies Nutri Ninja®Cup Pro Extractor
Blades™NutriNinja Auto-iQ™Blend
Smoothies
Frappes
Milkshakes
Protein Drinks
Green Smoothies Nutri Ninja®Cup Pro Extractor
Blades™
NutriNinja Auto-iQ™Ultra
Blend
Frozen Fruits
Frozen Vegetables
Kale
Celery
Spinach
Seeds
Ice
Grating Nutri Ninja®Cup Pro Extractor
Blades™
Auto-iQ™Pulse
High
Grated Cheese
Bread Crumbs
Spices
Chopping Nutri Ninja®Cup Pro Extractor
Blades™
Auto-iQ™Pulse
High
Salsa
Vegetables
Nuts

13
www.ninjakitchen.com
HOW TO CLEAN
CAUTION: Make sure that the motor base is unplugged
from the power source before inserting or removing any
attachment and before cleaning.
CAUTION: DO NOT immerse the motor base into water or
any other liquid.
1Separate/remove all parts from each other.
2 Clean the motor base with a damp cloth and wipe dry.
3Place the blender pitcher and Nutri Ninja®cup in the
dishwasher. Place the lids and attachments on the
top rack. Use caution when handling the blade
assemblies as the blades are very sharp.
NOTE: You may also wash the containers by filling ¾ of
the container with warm water and a drop of dish washing
detergent, placing the corresponding lid on the container
and pressing the
Auto-iQ™ Pulse button a few times.
Once clean, remove the container from the motor base.
Rinse the container, attachment and lid under running
water. Allow all the parts to dry before storing.
Please call customer service if any servicing needs to be
performed on the appliance at 1-877-646-5288.
Care & Maintenance
HOW TO STORE
1 Store the Nutri Ninja®| Ninja® Blender with Auto-iQ™
Technology
upright with the pitcher on the motor base,
6-Blade assembly inside the pitcher and lid on the
pitcher. Do not place anything on top. S tore the Nutri
Ninja®cup and the rest of the attachments along side
the appliance or in a cabinet where they will not be
damaged and won’t cause a hazard.
RESETTING THE MOTOR THERMOSTAT
The Nutri Ninja®| Ninja® Blender with Auto-iQ™
Technology features a unique safety system which
prevents damage to the unit’s motor and drive system
should you inadvertently overload your appliance. If
the appliance is being overloaded, the motor
will stop. Allow the appliance to cool for
approximately 15 minutes. To reset the appliance,
follow the resetting procedure below:
1 Unplug the appliance from the electrical outlet.
2 Remove and empty the container and ensure that no
food is jamming the cutting blades or attachments.
3 Allow the appliance to cool for approximately 15
minutes.
4 Re-install the container onto the base and re-plug the
appliance into the electrical outlet.
5 Proceed to use the appliance as before making sure not
to exceed the recommended maximum capacities.

14 1-877-646-5288
Troubleshooting Guide
Replacement Parts
ORDERING REPLACEMENT PARTS
To order additional parts and attachments, please visit our website: www.ninjakitchen.com
or feel free to contact customer service: 1-877-646-5288.
PROBLEMS POSSIBLE REASONS & SOLUTIONS
Motor Doesn’t Start or
Attachment Doesn’t Rotate.
Make sure the container is securely placed on motor base.
Make sure the lid is securely on container in the correct position (align
arrows).
The appliance is turned “Off”. Press the power button ( ) to turn “On”.
Check that the plug is securely inserted into the electrical outlet.
Check the fuse or circuit breaker.
The unit has overloaded. The appliance will stop and the power light will
flash. Unplug and wait approximately 15 minutes before using again.
The unit has overheated. Unplug and wait approximately 15 minutes before
using again.
Check to make sure the unit is not overloaded.
Food is Unevenly Chopped.
Either you are chopping too much food at one time, or the pieces are not of
even size and processing smaller amounts per batch.
Food is Chopped Too Fine or is
Too Watery.
The food has been over processed. Use Auto-iQ™Pulse button for
controlled processing.
Food Collects On Lid or On the
Sides of the Container.
The mixture is too thick. Add more liquid.
You Cannot Achieve Snow
From Solid Ice.
Do not use ice that has been sitting out or has started to melt. Use ice
straight from the freezer.
Start with a few pulses and then go to a continuous blending cycle.
Motor Base Won’t Stick to
Counter or Table Top.
Make sure surface and suction feet are wiped clean. Suction feet will only
stick to smooth surfaces. Suction feet WILL NOT stick on some surfaces
such as, wood, tile and non-polished finishes.
DO NOT attempt to use appliance when the motor base is stuck to a
surface that is not secure, (cutting board, platter, plates, etc.).
You get an “Err” Message
Your Ninja is able to detect which jar is on the base. You may be trying
to use a program that is not designed for the jar you have installed. The
programs will light up indicating which programs are available for each jar.
You have a blinking red light
The unit is not installed properly. For your safety the unit will only be able to
be turned on when it is properly assembled. Please refer to the assembly
pages of this inspiration guide for assistance.

15
www.ninjakitchen.com
Available Accessories for the Nutri Ninja®| Ninja®
Blender with Auto-iQ™Technology
Thank you for purchasing your Nutri Ninja®| Ninja® Blender with Auto-iQ™Technology. You may have purchased some of
the following additional accessories. Please refer to the assembly and usage instructions on the next few pages for the
accessories you purchased.
To purchase the additional accessories shown below, please call customer service at 1-877-646-5288.

16 1-877-646-5288
Available Accessories for the Nutri Ninja®| Ninja®
Blender with Auto-iQ™Technology
fSlicing/Shredding Disc
(food processor)
gGrating Disc (food processor)
h24 oz. Mini Prep Bowl
iSpindle for Discs & Mini Prep Bowl
j Mini Prep Bowl Blade
aFood Processor Bowl
bFood Processor Lid
c Chopping Blade (food processor)
d Dough Blade (food processor)
eFeed Chute Lid
a
e
d
c
g
h
i
j
f
b
FROZEN DRINKS
SMOOTHIES
FOOD
PUREE
NutriNinja
NutriNinja
PULSE
HIGH
MED
ON
OFF
1500
WATTS
LOW
AUTO
AUTO
AUTO
A
UTO BLEND
A
UTO BLAST
FROZEN DRINKS
SMOOTHIES
FOOD
PUREE
NutriNinja
NutriNinja
PULSE
HIGH
MED
ON
OFF
1500
WATTS
LOW
AUTO
AUTO
AUTO
A
UTO BLEND
A
UTO BLAST
FROZEN DRINKS
SMOOTHIES
FOOD
PUREE
NutriNinja
NutriNinja
PULSE
HIGH
MED
ON
OFF
1500
WATTS
LOW
AUTO
AUTO
AUTO
A
UTO BLEND
A
UTO BLAST
NEW SHOOT LID
JUNE 9/14
HAS NEW BASE
NEW BOWL AND BLADE
JUNE 9/14
FROZEN DRINKS
SMOOTHIES
FOOD
PUREE
NutriNinja
NutriNinja
PULSE
HIGH
MED
ON
OFF
1500
WATTS
LOW
AUTO
AUTO
AUTO
A
UTO BLEND
A
UTO BLAST
FROZEN DRINKS
SMOOTHIES
FOOD
PUREE
NutriNinja
NutriNinja
PULSE
HIGH
MED
ON
OFF
1500
WATTS
LOW
AUTO
AUTO
AUTO
A
UTO BLEND
A
UTO BLAST
FROZEN DRINKS
SMOOTHIES
FOOD
PUREE
NutriNinja
NutriNinja
PULSE
HIGH
MED
ON
OFF
1500
WATTS
LOW
AUTO
AUTO
AUTO
A
UTO BLEND
A
UTO BLAST
NEW SHOOT LID
JUNE 9/14
HAS NEW BASE
NEW BOWL AND BLADE
JUNE 9/14
FROZEN DRINKS
SMOOTHIES
FOOD
PUREE
NutriNinja
NutriNinja
PULSE
HIGH
MED
ON
OFF
1500
WATTS
LOW
AUTO
AUTO
AUTO
A
UTO BLEND
A
UTO BLAST
FROZEN DRINKS
SMOOTHIES
FOOD
PUREE
NutriNinja
NutriNinja
PULSE
HIGH
MED
ON
OFF
1500
WATTS
LOW
AUTO
AUTO
AUTO
A
UTO BLEND
A
UTO BLAST
FROZEN DRINKS
SMOOTHIES
FOOD
PUREE
NutriNinja
NutriNinja
PULSE
HIGH
MED
ON
OFF
1500
WATTS
LOW
AUTO
AUTO
AUTO
A
UTO BLEND
A
UTO BLAST
NEW SHOOT LID
JUNE 9/14
HAS NEW BASE
NEW BOWL AND BLADE
JUNE 9/14
CAUTION: Blade assemblies are sharp and
removable, handle with care. When handling the
blade assemblies, always hold them by the shaft.
BEFORE FIRST USE
1Remove all packaging material and labels from the
appliance.
2Wash the lids, food processor bowl, mini prep bowl,
discs, and blades in warm, soapy water with a soft
cloth. Use caution when washing the blade
assemblies as the blades are very sharp.
3Rinse and dry thoroughly.
4The food processor bowl, mini prep bowl, discs, lids and
blades, are all dishwasher safe. It is recommended that
the lids and blades be placed on the top rack. Ensure
that the blades are removed from the containers before
placing in the dishwasher.
5Wipe the motor base clean with a damp cloth.

17
www.ninjakitchen.com
Assembly and Use for the Processor Bowl
NOTE: Nutri Ninja®
|
Ninja®Blender with Auto-iQ™
Technology can sense which jar is on the motor base.
The available function lights will illuminate depending
on which jar is placed on the motor base. (Fig. 1)
Use caution when handling the blade assemblies
as the blades are very sharp.
WARNING: Never leave the appliance unattended while
in use.
IMPORTANT: Make sure that the motor base is
plugged in for use.
1 Holding the desired blade by the top of the shaft, place
it onto the drive gear inside the bowl. Ensure that the
attachment is seated properly and is standing upright.
(Fig. 2)
NOTE: The blade will fit loosely on the drive gear.
2Place the motor base on a clean, dry, level surface such
as a counter or table top.
3 Align and lower the Processor Bowl onto the motor
base. (Fig. 3) Handle should be aligned slightly to the
right of the “LOCK” symbol on the motor base.
4Rotate the bowl clockwise until it locks in place, you will
hear a click when the lock is engaged. (Fig. 4)
5The bowl can be placed on the motor base two ways;
the handle can be on the front right corner or the front
left corner. (Fig. 5a, Fig. 5b)
6Add the ingredients to the bowl, making sure that they
do not exceed the highest measured marking line on
the side of the bowl.
8Holding the lid by the handle in the upright position,
place it on top of the Processor Bowl aligning the
triangle ( ) located on the lid with the triangle ( )
located on the Processor Bowl handle. (Fig. 6a) Press
the handle down until you hear a click.
The triangles on the lid and the Processor Bowl handle
MUST be aligned in order for the blender to turn on.
(Fig. 6b)
NOTE: The 64 oz. bowl is not intended for blending
drinks. Do not overfill.
7 Plug the power cord into the electrical outlet and press
the power button ( ).
NOTE: As a safety feature, the power button ( ) will
flash and the motor will not work if the bowl and lid
are not installed correctly. When the bowl and lid
are installed properly, the power button ( ) will be
solid, indicating that the appliance is ready for use.
ASSEMBLY
FROZEN DRINKS
SMOOTHIES
PUREE
PULSE
HIGH
MED
LOW
AUTO
AUTO
AUTO
Fig. 5a Fig. 5b
FROZEN DRINKS
SMOOTHIES
PUREE
PULSE
HIGH
MED
LOW
AUTO
AUTO
AUTO
Fig. 2
FROZEN DRINKS
SMOOTHIES
PUREE
PULSE
HIGH
MED
LOW
AUTO
AUTO
AUTO
Fig. 3
Fig. 1
FROZEN DRINKS
SMOOTHIES
PUREE
PULSE
HIGH
MED
LOW
AUTO
AUTO
AUTO
Fig. 4
Fig. 6a
Fig. 6b

18 1-877-646-5288
USING THE CHOPPING BLADE ASSEMBLY
WARNING: Never leave the appliance unattended while
in use.
1Holding the Chopping Blade assembly by the shaft,
place it onto the gear shaft inside the bowl. Ensure that
the attachment fits around the gear shaft and that it is
standing straight.
2 Add the ingredients and secure the bowl lid onto the
bowl. (Fig. 1)
3Plug the power cord into the electrical outlet and press
on the power button ( ).
4Select the speed or Auto-iQ™program that best suits
your needs. Pulse ingredients for even chopping by
holding the Auto-iQ™Pulse button until your desired
consistency is reached.
NOTE: Please refer to “Speed Settings & Uses” chart
for suggested uses and speeds.
5When you have reached your desired consistency, stop
the appliance by pressing the power button ( ) and
wait for the blade to stop turning. (Fig. 2)
6To remove the lid, press the release button on the lid
and pull the lid handle up to a 90°angle. (Fig. 2)
7Turn the bowl counter-clockwise and lift it to remove it
from the motor base. (Fig. 3)
CAUTION: If pouring from the bowl, ALWAYS remove
the blade assembly first before pouring.
USING THE DOUGH BLADE
WARNING: Never leave the appliance unattended while
in use.
1Place the motor base on a clean, dry, level surface such
as a counter or table top. (Fig. 4) Press down on the
motor base to adhere it to a counter or table top to give
the unit a better grip using the suction cups.
2Secure the bowl onto the motor base.
3Holding the dough blade by the shaft, place it onto the
gear shaft inside the bowl. Ensure that the attachment
fits around the gear shaft and that it is standing straight.
4Add the ingredients and secure the bowl lid onto the bowl.
5Plug the power cord into the electrical outlet and press
on the power button ( ). Select the speed that best
suits your needs.
NOTE: Please refer to “Speed Settings & Uses” chart
for suggested uses and speeds.
6Once finished making dough, stop the appliance by
pressing the power button ( ) and wait for the blade to
stop turning. To remove the lid, press the release button
on the lid and pull the lid handle up to a 90°angle.
(Fig. 2)
7Turn the bowl counter-clockwise and lift it to remove it
from the motor base. (Fig. 3)
Assembly and Use for the Processor Bowl - cont.
REMOVAL
Fig. 2 Fig. 3
USE
Fig. 4
USE
Fig. 1
Use caution when handling the blade assemblies as the blades are very sharp.

19
www.ninjakitchen.com
USING THE DISCS
NOTE: Disc attachments must be used with the
feed chute lid.
IMPORTANT: Use only the High setting when using
either disc.
1Place the motor base on a clean, dry, level surface such
as a counter or table top. (Fig. 5)
2Secure the bowl onto the motor base.
3Place the spindle inside the bowl.
4Use the finger holes to grasp the selected disc and
place it over the spindle.
5Place the feed chute lid on the bowl and turn clockwise
until you here a click indicating the lid is locked in
place. (Fig. 5)
6Plug the power cord into the electrical outlet and press
up on the power toggle ( ) to turn the power “On”.
7Select HIGH on the control panel. The discs will begin
spinning.
8Add the food that you want to slice, shred or grate
through the feed chute on the lid. (Fig. 5) Use the
two-part food pusher to help guide the food through
the feed chute. The middle piece of the food pusher is
removable to use for smaller ingredients.
9When finished,stop the appliance by pressing the power
button ( ) and wait for the disc to stop turning. Press
the button on the feed chute lid located near the handle
to unlock and turn the lid counter-clockwise. Lift to
remove from the processor bowl. Using the finger holes,
carefully lift the disc out of the bowl and remove the
spindle.
Fig. 5
Use caution when handling the discs as the blades are very sharp.
Assembly and Use for the Disc Attachments

20 1-877-646-5288
ASSEMBLY
Assembly and Use for the Mini Prep Bowl
USE
WARNING: Never leave the appliance unattended while in use.
USING THE 3 CUP MINI PREP BOWL
NOTE: The mini prep bowl must be used with the
flat food processor lid.
1Place the 64 oz. bowl onto the motor base.
2Holding the spindle by the shaft, place it onto the
gear shaft inside the 64 oz. bowl. Ensure that the
attachment fits around the gear shaft and that it is
standing straight. (Fig. 1)
3Place the mini prep bowl aligning the spindle inside the
center post. (Fig. 2)
4Hold the prep bowl blade by the shaft and carefully place
it over the center post of the mini prep bowl. (Fig. 3)
5Add ingredients into the mini prep bowl.
6Holding the lid by the handle in the upright position,
place it on top of the 64 oz. bowl aligning the arrow
() located on the lid with the arrow ( ) located on the
bowl’s handle. (Fig. 4) Press the handle down until you
hear a click.
Fig. 1
Fig. 4
Fig. 2
Fig. 3
Fig. 5
FROZEN DRINKS
SMOOTHIES
FOOD
PUREE
NutriNinja
NutriNinja
PULSE
HIGH
MED
ON
OFF
1500
WATTS
LOW
AUTO
AUTO
AUTO
A
UTO BLEND
A
UTO BLAST
FROZEN DRINKS
SMOOTHIES
FOOD
PUREE
NutriNinja
NutriNinja
PULSE
HIGH
MED
ON
OFF
1500
WATTS
LOW
AUTO
AUTO
AUTO
A
UTO BLEND
A
UTO BLAST
REMOVAL
Fig. 6
Fig. 7
7Plug the power cord into the electrical outlet and press
on the power button ( ).
8Select the speed that best suits your needs. For best
results, hold the Auto-iQ™Pulse button down until you
have reached your desired consistency. (Fig. 5)
NOTE: Please refer to “Speed Settings & Uses” chart
for suggested uses and speeds.
9When you have reached your desired consistencey, stop
the appliance by pressing the power button
() and wait for the blade to stop turning.
10 To remove the lid, pull the lid handle up to a 90° angle
and lift the lid off. (Fig. 6)
11 Carefully hold the mini prep bowl blade by the shaft and
lift it out of the mini prep bowl. (Fig. 7)
12 Turn the bowl counter clockwise and then lift off the
base.
CAUTION: If pouring from the bowl, ALWAYS remove
the blade assembly first before pouring.