Ninja BL580VSM Series User manual

ninjakitchen.sg | ninjakitchen.my
WITH
FRESHVAC™
TECHNOLOGY
BL580VSM
Series
OWNER’S GUIDE

1 1
SG [phone] MY [phone] ninjakitchen.sg | ninjakitchen.my
CONTENTS
THANK YOU FOR PURCHASING
The Nutri Ninja™ with FRESHVAC™ Technology
Important Safeguards� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 2
Getting to Know Your
Nutri Ninja™ with FreshVac™ Technology � � � � � � � � � � � � � � � � � 6
Before First Use � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 8
Features� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 9
Single-Serve Cup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Using Your Single-Serve FreshVac™ Cup � � � � � � � � � � � � � � � � 10
Care & Maintenance� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 14
Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Storing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Resetting the Motor Thermostat. . . . . . . . . . . . . . . . . . . . . . . . . . .14
Troubleshooting Guide� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 15
Replacement Parts � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 16
Product Registration� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 16
PLEASE READ CAREFULLY AND
KEEP FOR FUTURE REFERENCE�
These instructions are designed
to help you get a complete
understanding of your new
Nutri Ninja™ with FreshVac™
Technology.
If you have any questions, please
call our Customer Service line at
SG [phone] or MY +60 1800
803 915
THIS BOOK COVERS
MODEL NUMBER:
BL580VSM
TECHNICAL SPECIFICATIONS
Voltage: 220-240V~, 50-60Hz
Power: 1000 Watts
CUP CAPACITY:
700ml
TIP: You can find the model and serial
numbers on the label located on the back
of the unit by the power cord.
GUARANTEE: This product is
unconditionally guaranteed for one year
against all defects of workmanship
and materials. This guarantee does
not aect your statutory rights. If
this product proves unsatisfactory
please contact our customer service
department on SG [phone] or
MY [phone] .
RECORD THIS INFORMATION
Model Number: ________________
Serial Number: _________________
Date of Purchase: _______________
(Keep receipt)
Store of Purchase: ______________
REGISTER YOUR PURCHASE
ninjakitchen.sg | ninjakitchen.my
SG [phone]
ML [phone]
This appliance complies with the WEEE-Directive 2012/19/EU on the disposal of electrical
and electronic equipment (WEEE).
This marking indicates that this product should not be disposed with other
household wastes throughout the EU. To prevent possible harm to the environment
or human health from uncontrolled waste disposal, recycle it responsibly to promote
the sustainable reuse of material sources. To return your used device, please use
the return and collection systems or contact the retailer where this product was
purchased. They can take this product for environmental safe recycling.
This appliance complies with the European directives for electromagnetic compatibility (EMC)
2014/30/EU and its revisions, as well as Low Voltage Directive (LVD) 2014/35/EU and its revisions.

2 3
ninjakitchen.sg | ninjakitchen.my
Read all instructions before using your
NUTRI NINJA™WITH FRESHVAC™ TECHNOLOGY
When using electrical appliances, basic safety precautions
should always be followed, including the following:
WARNING
To reduce the risk of fire, electric
shock, serious injury, death, or
damage when using this appliance,
follow these basic safety precautions.
General Precautions
1Read all instructions prior to using
the appliance and its accessories.
2Carefully observe and follow all
warnings and instructions. This unit
contains electrical connections
and moving parts that potentially
present risk to the user.
3ALWAYS exercise care when
handling the Pro Extractor Blades™
Assembly. The blades are sharp.
ON LY grasp the Pro Extractor
Blades Assembly by the outer
perimeter of the blade assembly
base. Failure to use care when
handling the blade assembly will
result in a risk of laceration.
4Take your time and exercise care
during unpacking and appliance
setup. This appliance contains
sharp, loose blades that can cause
injury if mishandled.
5Take inventory of all contents to
ensure you have all parts needed
to properly and safely operate
your appliance.
6Blades are sharp. Handle carefully.
7Turn the appliance OFF, then
unplug the appliance from the
outlet when not in use, before
assembling or disassembling
parts, and before cleaning. To
unplug, grasp the plug by the
body and pull from the outlet.
NEVER unplug by grasping and
pulling the flexible cord
8Before use, wash all parts that
may contact food. Follow washing
instructions covered in this
instructionmanual.
9To protect against the risk of
electric shock, DO NOT submerge
the appliance or allow the power
cord to contact any form of liquid.
10 DO NOT use this appliance
outdoors. It is designed for indoor
household use only.
11 DO NOT operate any appliance
with a damaged cord or plug, or
after the appliance malfunctions
or is dropped or damaged in any
manner. This appliance has no
user-serviceable parts. If damaged,
contact SharkNinja for servicing.
12 Extension cords should NOT be
used with this appliance.
13 DO NOT allow children to operate
this appliance, to play with it, or
use as a toy. Keep the appliance
and its cord out of reach
of children.
14 This appliance is NOT intended to
be used by people with reduced
physical, sensory, or mental
capabilities, or lack of experience
and knowledge, unless they are
given supervision or instruction
concerning use of the appliance
by a person responsible for their
safety.
15 Before each use, inspect blade
assemblies for damage. If a blade
is bent or damage is suspected,
contact SharkNinja to arrange
for replacement.
16 DO NOT attempt to sharpen blades.
17 DO NOT allow the unit or the cord
to hang over the edges of tables or
worktops. The cord may become
snagged and pull the appliance o
the work surface.
18 DO NOT allow any part of the
unit to contact hot surfaces,
including stoves and other
heating appliances.
19 ALWAYS use the appliance on a
dry and level surface.
20 NEVER place a blade assembly
on the motor base without it first
being attached to the cup.
21 Keep hands, hair, and clothing out
of the container when loading and
operating.
22 ON LY use attachments and
accessories that are provided with
the product or are recommended
by SharkNinja. The use of
attachments not recommended or
sold by SharkNinja may cause fire,
electric shock, or injury.
23 During operation and handling of
the appliance, avoid contact with
moving parts.
24 DO NOT operate the appliance
with an empty container.
25 DO NOT fill containers past the
MAX FILL or MAX LIQUID lines.
26 DO NOT microwave any containers
or accessories provided with
the appliance.
27 DO NOT perform grinding
operations with the Single-
Serve Cup and Pro Extractor
Blades™Assembly.
28 Before operation, ensure all utensils
are removed from containers.
Failure to remove utensils can
cause containers to shatter and
potentially result in personal injury
and property damage.
29 NEVER operate the appliance
without lids and caps in place.
30 DO NOT attempt to defeat the
interlock mechanism. Ensure the
container and lid are properly
installed before operation.
31 DO NOT expose the containers
and accessories to extreme
temperature changes. They may
experience damage.
32 NEVER leave the appliance
unattended while in use.
33 DO NOT blend hot liquids. Doing
so may result in pressure buildup
and steam exposure that can pose
a risk of the user being burned.
34 DO NOT attempt to remove the
container and lids from the motor
base while the blade assembly is
still spinning. Allow the appliance
to come to a complete stop before
removing lid and container.
35 Remove the Pro Extractor Blades™
Assembly from the Single-Serve
Cup upon completion of blending.
DO NOT store ingredients before
or after blending them in the cup
with the blade assembly attached.
Some foods may contain active
ingredients or release gases that
will expand if left in a sealed
container, resulting in excessive
pressure buildup that can pose
a risk of injury. For ingredient
storage in the cup, use only
Spout Lid to cover.
IMPORTANT SAFEGUARDS
HOUSEHOLD USE ONLY • READ ALL INSTRUCTIONS BEFORE USE
SAVE THESE INSTRUCTIONS
SG [phone] MY [phone]

4 5
ninjakitchen.sg | ninjakitchen.my
Read all instructions before using your
NUTRI NINJA™WITH FRESHVAC™ TECHNOLOGY
When using electrical appliances, basic safety precautions should always
be followed, including the following:
WARNING
To reduce the risk of fire, electric
shock, serious injury, death, or
damage when using this appliance,
follow these basic safety precautions.
GENERAL PRECAUTIONS
36 If the appliance overheats, a
thermal switch will activate and
temporarily disable the motor. To
reset, unplug the appliance and
allow it to cool for approximately
30 minutes before using again.
37 The maximum wattage rating for
this appliance is based on the
configuration of the Pro Extractor
Blades Assembly and Single-Serve
Cup. Other configurations may
draw less power or current.
38 DO NOT process dry ingredients
without adding liquid to the Single-
Serve Cup. The Single-Serve Cup is
not intended for dry blending.
39 DO NOT spray the motor base with
any liquids. Turn o and unplug
the motor base before cleaning.
40 DO NOT incinerate this appliance
even if it is severely damaged.
The batteries can explode in a fire.
41 Use certified AA size battery, follow
instruction to insert batteries with
correct polarity, Please remove
batteries if appliance is to be stored
unused for a long time.
42 DO NOT charge non-rechargeable
batteries. Do not mix dierent
type batteries, or new and used
batteries. Do not short-circuit
supplier terminals. Exhausted
batteries need to be removed and
safely disposed of.
43 To protect against risk of electrical
shock, DO NOT immerse the motor
base in water or other liquid.
DO NOT spray the motor base with
any liquids. Turn o and unplug the
motor base before cleaning.
44 DO NOT operate pump during
blending
45 DO NOT operate pump upside
down.
46 DO NOT immerse pump in water or
any other liquid.
IMPORTANT SAFEGUARDS
HOUSEHOLD USE ONLY • READ ALL INSTRUCTIONS BEFORE USE
SAVE THESE INSTRUCTIONS
MAIN UNIT
AFreshVac™ Tab
BFreshVac™ Pump
COverflow Reservoir
DFlip & Seal Cap
E700ml Single Serve
FreshVac™ Cups (x 2)*
FPro Extractor Blades™
Assembly
GMotor Base with Power Cord
HSpout Lid (x2)
GETTING TO KNOW YOUR
NUTRI NINJA™ WITH FRESHVAC™ TECHNOLOGY
WELCOME!
Congratulations on your
purchase. Use this instruction
manual to learn about the great
features of your Nutri Ninja with
FreshVac™ Technology. From
assembly to use to maintenance,
you will find it all in here.
If you have any questions, concerns
or feedback, we’d love to hear from
you. Give us a call on SG [phone]
5111 or MY [phone] or visit
ninjakitchen.sg or ninjakitchen.my
*600ml. max liquid capacity.
SG [phone] MY [phone]

7
ninjakitchen.sg | ninjakitchen.my
6
SG [phone] MY [phone]
PARTS
A
B
C
D
H
Pump
Release
Twist o
Battery
Assembly
G
F
E
BEFORE FIRST USE
IMPORTANT: Review all warnings
on pages 2–5 before proceeding.
DID YOU KNOW?
• You can take your drinks on the go
using the Spout Lids.
• The containers, blade assemblies, and
lids are BPA free and dishwasher safe.
INSTALLING THE BATTERIES
1Unscrew the FreshVac™ Pump’s power
button cap and remove the spring-
loaded battery cover.
2Install 6 AA alkaline batteries
(included), ensuring the +/- symbols
on the batteries match
the markings on the battery cover
and battery housing.
3 Replace the battery cover, making sure it
is fully seated and clicked in place.
4 Screw on the pump’s power button cap.
USING THE OPTIONAL FRESHVAC
POWER CORD:
If you prefer to power your FreshVac
Pump using a power cord, you may
purchase one on ninjakitchen.com
1 Insert the mains plug into an electrical
socket.
2Insert the barrel connector (small
round end of the power cord) into the
port on the pump.
3When the power cord is correctly
attached, you will be able to turn on
the FreshVac Pump.
The power cord must only be supplied for
safety at extra low voltage corresponding to
the marking on the appliance.
NOTE: Use only an optional power
cord manufactured by SharkNinja.
Other after-market adapters are not
compatible with the FreshVac™ pump.
NOTE: If the battery cover and power
button cap are not properly installed
or tightly in place, the pump will
not function.
NOTE: All attachments are dishwasher
safe. It is recommended that the lids,
containers and blade assemblies
be placed on the top rack of the
dishwasher. Ensure blade assemblies
and lids are removed from their
containers before placing in the
dishwasher. Exercise care when
handling blade assemblies. Overflow
reservoir is hand wash only.
Make sure Flip & Seal Lid is open
during dishwasher cycle.
NOTE: Handle the Pro Extractor
Blades™ Assembly by grasping around
the perimeter of the blade assembly
base.
1Remove all packaging materials
from the appliance. Exercise care
when unpacking blade assemblies.
All blade assemblies are sharp.
2Wash containers, lids, and blade
assemblies in warm, soapy, water
using a dishwashing utensil with
a handle to avoid direct contact
with the blades. Exercise care when
handling blade assemblies, as the
blades are sharp.
3Thoroughly rinse and air-dry all parts.
4Wipe screen with a soft, damp
cloth. Allow it to dry completely
before using.
If light blinks white and green,
replace batteries or make sure
they’re properly installed.
White Light:
Vacuum sealing
in progress
Green Light:
Vacuum sealing
complete

9
ninjakitchen.sg | ninjakitchen.my
8
SG [phone] MY [phone]
FEATURES
AUTO-IQ™ PROGRAMS FOR THE SINGLE-SERVE CUP
Intelligent pre-set programs combine unique blending and pausing patterns
that do the work for you. Once a pre-set program is selected, it will start
immediately. Press the selected program again to pause it.
MANUAL SETTINGS:
START | STOP
Press once to start continuous
running; press again to stop.
Timer counts up by seconds,
up to 60 seconds.
PULSE
Runs only while pressed down.
Short presses create short pulses.
Timer counts up by seconds as
long as button is pressed down.
AUTO-IQ PROGRAMS:
AUTO-IQ SMOOTHIE
Make super-smooth, sippable drinks
and shakes from fresh or frozen
fruit, milk, liquids, and ice.
AUTO-IQ EXTRACT
Ideal for tough, leafy, or fibrous
whole fruits and vegetables,
including their skins, seeds,
and stems.
VACUUM BLENDING
WITH THE SINGLE-SERVE FRESHVAC™ CUP
IMPORTANT: Review all warnings
on pages 2–5 before proceeding.
2Place the Pro Extractor Blades™
Assembly on the top of the cup
and turn clockwise to seal.
3Turn cup upside down so the
Flip & Seal Lid is on top and the
bottom of the blade assembly is
flat on the worktop.
1Add ingredients to the FreshVac™
Cup. DO NOT add ingredients past
the MAX LIQUID line on the cup.
4To open the Flip & Seal Lid,
press and lift the latch. Place the
FreshVac™ Pump on top of the
FreshVac™ Tab.
Vacuum blending recommended
for extractions, smoothies, soups, dips,
and dressings for brighter flavours,
vibrant colours, and improved textures.
Non vacuum blending recommended
for whipped desserts that benefit from
added air and frozen drinks with highly
frozen ingredients for thicker results.
IMPORTANT: Overfilling the cup may
cause harm to the FreshVac Pump
when in use.
IMPORTANT: Ensure FreshVac Tab is
dry before using FreshVac Pump.

10 11
SG [phone] MY [phone] ninjakitchen.sg | ninjakitchen.my
5To vacuum seal the cup, place the
pump over the tab. Press the power
button on top of the pump to begin
vacuum sealing. The pump will make
a motorised noise and the light on
the pod will illuminate in white while
vacuum sealing is in progress. You
do not need to hold the pump in
place while vacuum sealing.
8Close the Flip & Seal Lid. Press it
closed until it clicks into place.
9To blend ingredients, follow
instructions on page 12.
When blending is complete, pressure
must be released from the cup
through the FreshVac™ Tab before
opening the lid. See step 7 on the
next page for more information.
6When vacuum sealing is complete,
the pump will shut o automatically
and the green light on the pump
will illuminate.
7To release the pump from the cup,
press the pump release button on
the bottom front of the pump and lift.
IMPORTANT: Do not use FreshVac™
Pump after blending, as this could
damage your pump.
IMPORTANT: Review all warnings
on pages 2–5 before proceeding.
SINGLE-SERVE FRESHVAC™ CUP
WITH VACUUM SPOUT LID
1Place the unplugged motor base on a
clean, dry, and level surface such as a
worktop or table. Press downward on
the motor base to adhere the suction
cups to the work surface. Plug the
motor base into a socket.
2Add ingredients to the Single-Serve
Cup. DO NOT add ingredients past
the MAX LIQUID line on the cup.
5If using a pre-set program, select
the program that best suits your
recipe. The pre-set feature will
automatically stop the unit at the
end of the program. To pause
the unit at any time, press the
currently active program a
second time. Reference page 9
for program descriptions.
4Turn the Single-Serve Cup upside
down and install onto the motor
base. Align the tabs on the cup with
the slots on the base, then twist
until it clicks into place. When the
unit is connected to power and
the container is correctly locked
onto the motor base, the program
buttons will illuminate and the unit
will be ready for use.
3Install the Pro Extractor Blades™
Assembly onto the top of the cup.
Twist the lid clockwise until it’s
sealed tightly.
VACUUM BLENDING
WITH THE SINGLE-SERVE FRESHVAC™ CUP - CONT

13
ninjakitchen.sg | ninjakitchen.my
12
SG [phone] MY [phone]
6When blending is complete,
remove the cup from the motor
base and place on the worktop with
the Pro Extractor Blade Assembly
on the bottom. To remove the cup
from the motor base, turn the cup
anti-clockwise and then lift it.
8Close the Flip and Seal Lid—you
will hear a click when it is
properly closed.
9Remove the Pro Extractor Blade
Assembly and place the vacuum
spout lid on the cup to take your
blended contents on the go.
10 Unplug the unit when finished. To
release the motor base, place your
hands underneath both sides of the
motor base and gently pull the unit
up and towards you. Refer to page
14 for storing instructions.
7Open the flip-top vacuum-seal lid
and pull on the green release tab
to release the vacuum seal. You
will not be able to remove the lid
without releasing the vacuum seal.
DO NOT PULL TAB OUT
TRADITIONAL BLENDING INSTRUCTIONS
IMPORTANT: Review all warnings
on pages 4–7 before proceeding.
2Place the Pro Extractor Blades™
Assembly on the top of the cup
and turn clockwise to seal.
3 Turn cup upside down so the Flip &
Seal Lid is on top and the bottom
of the blade assembly is flat on the
worktop flat on the counter.
1Add ingredients to the FreshVac
Cup. DO NOT add ingredients past
the MAX LIQUID line on the cup.
Non vacuum blending recommended
for whipped desserts that benefit from
added air and frozen drinks with highly
frozen ingredients for thicker results.
5If using a pre-set program, select
the program that best suits your
recipe. The pre-set feature will
automatically stop the unit at the
end of the program. To pause
the unit at any time, press the
currently active program a
second time. Reference page 11
for program descriptions.
4Turn the Single-Serve FreshVac
Cup upside down and install onto
the motor base. When the unit is
correctly locked into the motor
base, program lights will illuminate.

14
SG [phone] MY [phone]
15
ninjakitchen.sg | ninjakitchen.my
7Turn cup over so blade assembly
is on top. Rotate blade assembly
anti-clockwise to remove. To take
your blended contents on the go,
place the spout lid on cup and turn
clockwise to seal.
8Unplug the unit when finished. To lift
the motor base, place your hands
underneath both sides of it and
gently pull the unit up and toward
you. Refer to the Care & Maintenance
section for storing instructions.
6When blending is complete, lift
the cup up and out of the motor
base. Pressure must be released
before opening the cup (see step
14 below). DO NOT store contents
in the cup with the Pro Extractor
Blades™ Assembly attached.
CARE & MAINTENANCE
CLEANING
1Separate all parts.
2Wash all containers in warm, soapy
water with a soft cloth.
3Hand-Washing
Wash cups, lids, blade assembly, and
overflow reservoir in warm, soapy
water. Use a dishwashing utensil
with handle to avoid direct contact
with the blades. Exercise care when
handling the blade assembly as the
blades are sharp. Thoroughly rinse
and air-dry all parts.
TIP: If you find residue underneath
the FreshVac™ Tab, try lifting it gently
and rinsing under warm water.
DO NOT remove FreshVac Tab.
Dishwasher
Cups, lids, and blade assembly are
dishwasher safe. Place the cups, lids,
and blade assembly on the top rack
of the dishwasher ONLY. Ensure the
blade assembly and lid are removed
from the cup before placing in the
dishwasher. Make sure Flip & Seal Lid
on the cup is open before starting
cleaning cycle.
NOTE: Overflow Reservoir is not
dishwasher safe.
Motor Base
Turn o the unit and unplug
the motor base before cleaning.
Wipe motor base with a clean,
damp cloth.
NEVER directly spray the base
with water or other liquids.
DO NOT use abrasive cloths/pads/
brushes to clean the base, as this
can dull or scratch the surface.
FRESHVAC™ PUMP
NEVER submerge the pump in water
or other liquid. To clean pump, apply an
all-purpose cleaner to a soft cloth, such
as microfibre, and wipe gently.
NEVER submerge the pump in water
or other liquid. If you see water or
other liquid in the overflow reservoir:
1 Remove overflow reservoir
from pump and wash and dry it
thoroughly.
2 Run pump for 10 seconds to clear
any fluid.
3 Wipe pump clean with a soft cloth.
4 Reattach overflow reservoir to
pump.
RESETTING THE MOTOR
THERMOSTAT
This unit features a unique safety
system that prevents damage to
the motor and drive system should
you inadvertently overload it. If the
unit is overloaded, the motor will be
temporarily disabled. Should this occur,
follow the reset procedure below.
1Unplug the unit from the
electricalsocket.
2Allow the unit to cool for
approximately 30 minutes.
3 Remove the container’s lid and blade
assembly. Empty the container and
ensure no ingredients are jamming
the blade assemblies.
IMPORTANT: Ensure that
maximum capacities are not
exceeded. This is the most typical
cause of appliance overload.
If your unit needs servicing,
please call Customer Service
on 0800 862 0453.

16
SG [phone] MY [phone]
17
ninjakitchen.sg | ninjakitchen.my
TROUBLESHOOTING GUIDE
WARNING: To reduce the risk of shock and unintended operation,
turn power o and unplug unit before troubleshooting�
Unit doesn’t turn on�
• Make sure unit is plugged in.
• Place cup on base and rotate it clockwise until it clicks into place.
Unit doesn’t turn o�
• Remove cup from base by rotating it anti-clockwise and lifting it. Unplug the power
cord from the socket.
Container does not reach a full vacuum seal
• FreshTab™ Tab is wet. Be sure all vacuum components are dry before using.
• Low battery. If your FreshVac Pump is taking longer than usual to pull a vacuum, try replacing
the batteries.
• Overflow reservoir is incorrectly assembled. Before operating the pump, be sure the overflow
reservoir is correctly assembled on bottom of the pump. Overflow reservoir should sit flush
to pump.
• FreshVac Pump won’t turn on
• Ensure that working batteries are installed correctly in the pump and the battery cover
is securely in place.
• If using an optional power cord, make sure it is manufactured by Ninja Kitchen. Other after-
market adapters are not compatible with the pump.
• If using a SharkNinja power cord, make sure the connector is inserted fully into the pump.
FreshVac Pump won’t turn o
The pump will shut o automatically once a vacuum seal is achieved. If a vacuum seal is
not achieved, you will be able to remove the pump from the lid. If this happens, turn o
the pump and check the following:
• Make sure the Pro Extractor Blades™ Assembly is tightly attached to the cup.
• Ensure the FreshVac Tab on the Flip & Seal Lid is properly installed.
Pump won’t turn on�
• Ensure that working batteries are installed correctly in the pump, and the battery cover
is securely in place.
• If using an optional mains plug adapter, make sure it is manufactured by Ninja Kitchen..
Other after-market adapters are not compatible with the pump.
• If using a Ninja Kitchen mains plug adapter, make sure the connector is inserted fully into
the pump. DO NOT remove the tab from the lid.
Accidentally removed the FreshVac tab and need to reinstall
• In a case you accidentally remove the FreshVac Tab and need to reinstall, follow these
easy steps. First ensure the FreshVac Tab matches up with the opening on the Flip &
Seal Lid. Next, align the bottom side of the tab to match the shape of the opening on
the cup. Then press the tab down until it is seated flat.
What do the lights on the FreshVac Pump mean?
• White LED light indicates the pump has been activated and vacuum sealing is in progress.
• Green LED light indicates vacuum sealing is complete. Pump will automatically shut o when
complete.
• A blinking white and green light indicates the batteries have been loaded incorrectly or need
to be replaced.
17
REPLACEMENT PARTS
To order additional parts and accessories, visit ninjakitchen.sg or ninjakitchen.
my or contact Customer Service on SG [phone] or MY [phone]
915.
PRODUCT REGISTRATION
Please visit ninjakitchen.sg or ninjakitchen.my or call SG [phone]
5111 or MY [phone]. to register your new Ninja™ product
within 28 days of purchase. You will be asked to provide the store
name, date of purchase, and model number along with your name and
address.
The registration will enable us to contact you in the unlikely event of a
product safety notification. By registering, you acknowledge you have
read and understood the instructions for use and warnings set forth in
the accompanying instructions.
TROUBLESHOOTING GUIDE - Cont�
• Can’t remove Pro Extractor Blades™ Assembly from cup
• Cup will be vacuum sealed shut after using the FreshVac Pump.
• Release the vacuum seal by gently pulling up on the FreshVac Tab.
FreshVac Pump does not lock onto cup
• Pump will not lock onto cup. Once pump is activated, the pump will seal to the cup and
become secure.
FreshVac Pump is stuck on the cup
• To release the pump from the cup, press the pump release button (up arrow) and lift up.
Doesn’t mix well; ingredients get stuck
• Using the pre-set programs is the easiest way to achieve great results. The pulses and
pauses allow the ingredients to settle toward the blade assembly. If ingredients are
routinely getting stuck, adding some liquid will usually help.
• When filling the cup, start with fresh fruit or veggies, then leafy greens or herbs. Next add
liquids or yogurt, then seeds, powders, or nut butters. Finally, add ice or frozen ingredients.
Motor base won’t stick to worktop or tabletop
• Make sure surface and suction feet are wiped clean. Suction feet will only stick to smooth
surfaces.
• Suction feet will not stick on some surfaces such as wood, tile, and non-polished finishes.
• DO NOT attempt to use unit when the motor base is stuck to a surface that is not secure
(cutting board, platter, plates, etc.). Unit is dicult to remove from worktop for storage.
• Place your hands underneath both sides of the motor base and gently pull the unit up and
toward you.

Illustrations may dier from actual product. We are constantly striving to improve our products;
therefore the specifications contained herein are subject to change withoutnotice.
AUTO-IQ, SHARKNINJA, NINJA, and NUTRI NINJA are registered trademarks of SharkNinja Operating LLC.
FRESHVAC and PRO EXTRACTOR BLADES is a trademark of SharkNinja Operating LLC.
For SharkNinja U.S. Patent information, visit sharkninja.com/uspatents
© 2019 SharkNinja Operating LLC
PRINTED IN CHINA
BL580VSM_IB_MP_Mv1
Proudly distributed by
Mann&Noble Asia Pte Ltd
600 North Bridge Rd.,
#23-01 Parkview Square, Singapore 188778