Ninja BL682Z User manual

®BL682Z
OWNER’S GUIDE
ninjakitchen.com
1 877 646-5288

11-877-646-5288
IMPORTANT SAFETY INSTRUCTIONS
For Household Use Only
WHEN USING ELECTRICAL APPLIANCES,
BASIC SAFETY PRECAUTIONS SHOULD
ALWAYS BE FOLLOWED, INCLUDING THE
FOLLOWING:
READ ALL INSTRUCTIONS BEFORE
USING YOUR NUTRI NINJA® | NINJA®
BLENDER SYSTEM WITH AUTO-iQ™
TECHNOLOGY.
POLARIZED PLUG
WARNING: To reduce the risk of electric
shock, this appliance has a polarized plug (one
blade is wider than the other). This plug will fit
into a polarized outlet only one way. If the plug
does not fit fully into the outlet, reverse the
plug. If it still does not fit, contact a qualified
electrician to install the proper outlet. DO NOT
modify the plug in any way.
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR
INJURY:
1 WARNING: Remove utensils prior to
processing. Failure to remove may cause the
jar to be damaged or to shatter which may
cause personal injury.
2 WARNING: The blade assemblies are
sharp, not locked in place and removable,
handle with care. When handling the blade
assemblies, always hold by the shaft.
Failure to do so will result in a risk of
laceration.
3 WARNING: Stacked Blade Assembly is
sharp and not locked in place. If using the
pour spout, ensure the lid is fully locked
onto the pitcher. If pouring with the lid
removed, carefully remove the Stacked
Blade Assembly first, holding it by the shaft.
Failure to do so will result in a risk of
laceration.
4WARNING: Chopping Blade Assembly is
sharp and not locked in place. Before
emptying contents carefully remove lid and
Chopping Blade Assembly, holding it by the
shaft. Failure to do so will result in a risk of
laceration.
5 CAUTION: Do not blend hot liquids, doing
so may cause excessive pressure build-up,
resulting in risk of the user being burned.
6CAUTION: We do not recommend grinding
in any of our Nutri Ninja®Cups.
7 CAUTION: Remove the Pro Extractor
Blades®Assembly from the Nutri Ninja cup
upon completion of blending. Some
ingredients have the potential to expand
after blending resulting in excessive
pressure buildup that can pose a risk of
injury.

2
www.ninjakitchen.com
8 To protect against electrical shock, do not
submerge the appliance or allow the power cord
to come into contact with water or any other
liquid.
9 DO NOT allow the appliance to be used by
children. Close attention is necessary when used
near children. This is not a toy.
10 Never leave an appliance unattended when in
use.
11 Appliance accessories are not intended to be
used in the microwave as it may result in damage
to the accessories.
12 Turn the appliance Off and remove the power
cord from the electrical outlet when not in use,
before assembling or disassembling parts and
before cleaning. To unplug, grasp the plug and
pull from the electrical outlet. Never pull from the
power cord.
13 DO NOT abuse the power cord. Never carry
the appliance by the power cord or yank it to
disconnect from electrical outlet; instead grasp
the plug and pull to disconnect.
14 DO NOT operate any appliance with a damaged
cord or plug, or after the appliance malfunctions,
has been dropped or damaged in any manner.
This appliance has no serviceable parts. Return
the appliance to SharkNinja Operating LLC for
examination, repair or adjustment.
15 DO NOT let the power cord hang over the edge of
table or counter or touch hot surfaces such as the
stove.
16 Always use appliance on a dry, level surface.
17 Keep hands, hair, clothing, as well as utensils
out of container while processing to reduce the
risk of severe injury to persons or damage to the
appliance. A scraper may be used but only when
the appliance is not running.
18 Avoid contact with moving parts.
19 DO NOT attempt to sharpen blades.
20 DO NOT use the appliance if blade assemblies
are bent or damaged.
21 To reduce risk of injury, never place the blade
assemblies on the base without the pitcher or
Nutri Ninja cup properly attached.
22 DO NOT operate this appliance on or near any
hot surfaces (such as gas or electric burner or in
a heated oven).
23 The use of attachments or accessories
including canning jars, not recommended by the
manufacturer may result in fire, electric shock or
personal injury.
24 DO NOT remove the container from the motor
base while the appliance is in operation.
25 To reduce the risk of injury, NEVER operate the
appliance without the lid in place; DO NOT try
to defeat the interlock mechanism; make sure
that the attachment is properly installed before
operating the appliance.
26 DO NOT expose containers to extreme
temperature changes.
27 DO NOT overfill.
28 DO NOT operate the appliance empty.
29 To reduce the risk of burns, always allow the
appliance to cool before taking off parts and
before cleaning.
30 In the event that the unit overloads, the control
panel lights will flash and the unit will shut down.
Unplug the appliance and let it cool down for
approximately 15 minutes before using again.
31 THIS PRODUCT IS INTENDED FOR
HOUSEHOLD USE ONLY. Do not use this
appliance for anything other than its intended
use. Do not use outdoors.
32 The maximum rating is based on the Stacked
Blade Assembly (pitcher) that drives the greatest
power and other recommended attachments may
draw significantly less power or current.
SAVE THESE
INSTRUCTIONS

31-877-646-5288
THIS BOOK COVERS MODEL NUMBER:
BL682Z
TECHNICAL SPECIFICATIONS
Voltage: 120V~, 60Hz.
Power: 1500 Watts
Pitcher Capacity: 72 oz. (9 cups, 2.1 L)
Max Liquid Capacity: 64 oz. (8 cups, 1.9 L)
Bowl Capacity: 64 oz. (8 cups, 1.8 L)
Nutri Ninja®Cup Capacity: 24 oz. (3 cups, 710 mL)
32 oz. (4 cups, 950 mL)

4
www.ninjakitchen.com
Contents
Thank you for
purchasing the
Nutri Ninja®
|
Ninja®Blender
System with
Auto-iQ™
Technology.
Getting to Know Your Nutri Ninja®
|
Ninja®Blender System with Auto-iQ™Technology ......5
Before First Use ...........................................................................................................7
Assembly and Use of the Pitcher...................................................................................8
Assembly and Use of the Food Processor Bowl ............................................................10
Assembly and Use of the Nutri Ninja Cups ...................................................................12
Programs, Speed Settings & Uses...............................................................................13
Care & Maintenance ..................................................................................................15
Troubleshooting Guide................................................................................................16
Replacement Parts.....................................................................................................16
Warranty & Registration..............................................................................................18

51-877-646-5288
Getting To Know Your Nutri Ninja®
|
Ninja®Blender System with Auto-iQ™Technology
c d
a
j
l
b
e
i
k
eFood Processor Bowl
fFood Processor Lid
gDough Blade Assembly
hChopping Blade Assembly
aJumbo Multi-Serve 32 oz. Nutri
Ninja Cup
bRegular 24 oz. Nutri Ninja Cup (x2)
cPro Extractor Blades®Assembly
dSip & Seal®Lids (x3)
iPitcher
jPitcher Lid with Locking Handle
k Stacked Blade Assembly
lMotor Base
m Power Cord (not shown)
g
f
h

6
www.ninjakitchen.com
The Nutri Ninja®
|
Ninja®Blender System with Auto-iQ™Technology is a professional, high powered innovative tool with
a sleek design and outstanding performance, a true asset to any kitchen. The Nutri Ninja
|
Ninja Blender System with
Auto-iQ Technology features intelligent programs that combine unique pulsing, blending and pausing patterns that do the
work for you! Get great results every time with no guesswork required! For best results, be sure to carefully read all the
instructions contained in the manual before using this appliance.
Nutri Ninja
|
Ninja Blender System with Auto-iQ Technology Features:
• Ninja Blade Technology
• BPA Free Pitcher, Nutri Ninja Cups, Food Processor Bowl and Lids
• Drip-Free Pour Spout
• Total Crushing®Technology
• LED Control Panel with Timer
• Sturdy, Non-Slip Base
• Smart Lid technology for easy release
• 3 speeds: Low/Dough, Medium, & High
• 5 Auto-iQ settings - Auto-iQ Frozen Drinks/Smoothies, Auto-iQ Food Puree, Nutri Ninja Auto-iQ Blend,
Nutri Ninja Auto-iQ Ultra Blend and Auto-iQ Pulse
• Nutri Ninja Nutrient & Vitamin Extraction*
* Extract a Drink Containing Vitamins & Nutrients From Fruits & Veggies

71-877-646-5288
Before First Use
CAUTION: Do not immerse the motor base into
water or any other liquid.
1Remove all packaging material and labels from the
appliance. Separate/remove all parts from each other.
2Wash the lids, pitcher, bowl, Nutri Ninja®cups and
Blade Assemblies in warm, soapy water. When washing
the blade assemblies, use a dish-washing utensil with a
handle to avoid direct hand contact with blades.
WARNING : Handle the Blade Assemblies with care
when washing, as the blades are very sharp.
3Handle blade assemblies with care to avoid contact
with sharp edges. Rinse and air dry thoroughly.
4The pitcher, bowl, Nutri Ninja®cups, lids and Blade
Assemblies are all dishwasher safe. It is recommended
that the lids and Blade Assemblies be placed on the
top rack. Ensure that the blades are removed from the
containers before placing in the dishwasher.
5Wipe the motor base clean with a damp cloth.
PLEASE KEEP THESE IMPORTANT
SAFEGUARDS IN MIND WHEN USING THE
APPLIANCE:
IMPORTANT: Make sure that the motor base
is plugged in for use.
IMPORTANT: Never add ingredients into the
container before placing the Blade Assembly
in first.
IMPORTANT: Blade Assemblies are not
interchangeable.
IMPORTANT: DO NOT attempt to operate the
appliance without the lid on.
IMPORTANT: Never run the appliance empty.
IMPORTANT: Appliance accessories are not
intended to be used in the microwave as it
may result in damage to the accessories.
WARNING: Stacked
Blade Assembly is
sharp and not locked in
place. If using the pour
spout, ensure the lid
is fully locked onto the
pitcher. Failure to do so
will result in a risk of
laceration.
WARNING: Stacked
Blade Assembly is sharp
and not locked in place.
If pouring with the lid
removed, carefully
remove the Stacked
Blade Assembly first,
holding it by the shaft. Failure to do so
will result in a risk of laceration.
WARNING: Chopping
Blade Assembly is sharp and
not locked in place. Before
emptying contents carefully
remove lid and Chopping
Blade Assembly, holding it by
the shaft. Failure to do so will result in a
risk of laceration.

8
www.ninjakitchen.com
Assembly and Use of the Pitcher
Fig. 5b
ASSEMBLY
MED
LOW/
DOUGH
FROZENDRINKS
SMOOTHIES
PUREE
PULSE
HIGH
MED
LOW/
DOUGH
AUTO
AUTO
AUTO
FROZENDRINKS
SMOOTHIES
PUREE
PULSE
HIGH
MED
LOW/
DOUGH
AUTO
AUTO
AUTO
MED
LOW/
DOUGH
Fig. 5aFig. 4Fig. 3bFig. 1 Fig. 2
WARNING: Handle the Stacked Blade Assembly with care, as the blades are sharp.
WARNING: Remove utensils prior to processing. Failure to remove may cause the pitcher to be damaged or
to shatter, which may cause personal injury.
WARNING: Never leave the appliance unattended while in use.
CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the
user being burned.
IMPORTANT: Make sure that the motor base is plugged in for use.
Fig. 3a
OR
1 Review warning and caution statements above before
proceeding to number 2.
2Place the motor base on a clean, dry, level surface such
as a counter or table top. Press down on the motor
base to make sure that the Suction Cups adhere to the
counter or table top.
3 Align and lower the Pitcher onto the motor base.
(Fig. 1) Handle should be aligned slightly to the right of
the “LOCK” symbol on the motor base.
4Rotate the pitcher clockwise until it clicks in place. As
the pitcher rotates, it will lower and the safety tabs on
the bottom of the pitcher will slide under the safety tabs
on the top of the motor base. (Fig. 2)
5The pitcher can be placed on the motor base two ways;
the handle can be on the front right corner or the front
left corner. (Fig. 3a, Fig. 3b)
6Holding the Stacked Blade Assembly by the top of the
shaft, place it onto the drive gear inside the pitcher.
Ensure that the Stacked Blade Assembly is seated
properly and is standing upright. (Fig. 4)
NOTE: The Stacked Blade Assembly will fit loosely on
the drive gear.
7Add the ingredients to the pitcher, making sure that
they do not exceed the highest measured marking line
on the side of the pitcher.
NOTE: If you need to add additional ingredients while
the appliance is processing, open the pour spout cap
and pour the ingredients in through the opening.
NOTE: When blending any kind of liquids, such as
mixtures of any drinks or smoothies, do not exceed the
“MAX” liquid mark (64 oz.) on the Pitcher.
8Holding the lid by the handle in the upright position,
place it on top of the Pitcher aligning the triangle
( ) located on the lid with the triangle ( ) located on
the Pitcher’s handle. (Fig. 5a) Press the handle down
until you hear a click. The triangles on the lid and
the blender handle MUST be aligned in order for the
blender to turn on. (Fig. 5b)
IMPORTANT: As a safety feature, the power light
( ) will flash and the motor will not work if the
Pitcher and lid are not installed correctly. When
the Pitcher and lid are installed properly, the
power light ( ) will be solid, indicating that the
appliance is ready for use.
9Plug the power cord into the electrical outlet and press
the power button ( ).
It’s best to add the liquid ingredients first and then the dry ingredients.

91-877-646-5288
Assembly and Use of the Pitcher - cont.
Fig. 8
USE REMOVAL
Fig. 6
Fig. 9
Fig. 7
Fig. 10
Fig. 11
10 Review warning and caution statements on page 8
before proceeding.
NOTE: Nutri Ninja®| Ninja® Blender with Auto-iQ™
Technology can sense which jar is on the motor base.
The available function lights will illuminate depending
on which jar is placed on the motor base. (Fig. 6)
11 Press the power button to turn on the unit. Select
the speed or Auto-iQ program that best suits your
needs. The Auto-iQ program will stop the appliance
automatically at the end of the program. (Fig. 7)
NOTE: Pulse ingredients for even chopping by holding
the Auto-iQ Pulse button until your desired consistency
is reached.
12 To pause the appliance, press the selected speed or
Auto-iQ program a second time. When the program is
paused, the light on the program button will flash until
you press it again to resume the rest of the program.
13 When you have reached your desired consistency, stop
the appliance by pressing the power button ( ) and
wait for the blade to stop turning. (Fig. 8)
14 Turn the pitcher counter clockwise to remove and then
lift off the base. (Fig. 9)
WARNING: Never insert your hands in the pitcher
as the Stacked Blade Assembly is sharp. Always
use a spatula to dislodge food that has stuck to
the sides of the pitcher.
15 Open the pour spout cap and use the spout to empty
liquid contents.
16 For thicker consistencies, first remove the lid by
pressing the release button and pulling the lid handle
up to a 90 degree angle to lift lid off the pitcher. Then,
carefully remove the Stacked Blade Assembly by the
top of the shaft. Place Stacked Blade Assembly away
from the work area to avoid accidental contact. Finally,
empty contents from the pitcher. (Fig. 10)
17 Make sure that the unit is unplugged when not in use.
18 To release the motor base from the counter or table top,
place your hands underneath both sides of the motor
base and gently pull the unit up and towards you.
(Fig. 11)

10
www.ninjakitchen.com
Assembly and Use of the Processor Bowl
NOTE: Nutri Ninja®|Ninja®Blender System with Auto-
iQ™Technology can sense which jar is on the motor
base. The function lights will illuminate depending on
which jar is placed on the motor base. (Fig. 1)
1 Review warning and caution statements above before
proceeding to number 2.
2Place the motor base on a clean, dry, level surface such as a
counter or table top. Press down on the motor base to make
sure that the suction cups adhere to the counter or table top.
3 Align and lower the Processor Bowl onto the motor
base. (Fig. 2) Handle should be aligned slightly to the
right of the “LOCK” symbol on the motor base.
4Rotate the bowl clockwise until it locks in place, you will
hear a click when the lock is engaged. (Fig. 3)
5The bowl can be placed on the motor base two ways;
the handle can be on the front right corner or the front
left corner. (Fig. 4a, Fig. 4b)
6 Holding the desired blade assembly by the top of the
shaft, place it onto the drive gear inside the bowl.
Ensure that the blade assembly is seated properly and
is standing upright. (Fig. 5)
NOTE: The blade will fit loosely on the drive gear.
7Add the ingredients to the bowl, making sure that they
do not exceed the highest measured marking line on
the side of the bowl.
8Holding the lid by the handle in the upright position,
place it on top of the Processor Bowl aligning the
triangle ( ) located on the lid with the triangle ( )
located on the Processor Bowl handle. (Fig. 6a) Press
the handle down until you hear a click. The triangles on
the lid and the Processor Bowl handle MUST be aligned
in order for the blender to turn on. (Fig. 6b)
NOTE: The 64 oz. bowl is not intended for blending
drinks. Do not overfill.
9 Plug the power cord into the electrical outlet and press
the power button ( ).
NOTE: As a safety feature, the power button ( ) will
flash and the motor will not work if the bowl and lid
are not installed correctly. When the bowl and lid
are installed properly, the power button ( ) will be
solid, indicating that the appliance is ready for use.
ASSEMBLY
FROZENDRINKS
SMOOTHIES
PUREE
PULSE
HIGH
MED
LOW/
DOUGH
AUTO
AUTO
AUTO
FROZENDRINKS
SMOOTHIES
PUREE
PULSE
HIGH
MED
LOW/
DOUGH
AUTO
AUTO
AUTO
MED
LOW/
DOUGH
MED
LOW/
DOUGH
Fig. 1
MED
LOW/
DOUGH
Fig. 6b
WARNING: Chopping Blade Assembly is sharp and not locked in place. Before emptying contents carefully
remove lid and Chopping Blade Assembly, holding it by the shaft. Failure to do will result in risk of
laceration.
WARNING: Remove utensils prior to processing. Failure to remove may cause the bowl to be damaged or to
shatter, which may cause personal injury.
WARNING: Never leave the appliance unattended while in use.
CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the
user being burned.
CAUTION: Remove the lid from the bowl upon completion of processing. Some ingredients have the potential
to expand after blending resulting in excessive pressure buildup that can pose a risk of injury.
IMPORTANT: Make sure that the motor base is plugged in for use.
Fig. 5 Fig. 6aFig. 2 Fig. 4bFig. 3
Fig. 4a
OR

11 1-877-646-5288
Assembly and Use of the Processor Bowl - cont.
Fig. 2 Fig. 3 Fig. 5Fig. 1 Fig. 4
REMOVALUSE
CHOPPING BLADE
ASSEMBLY
USE
DOUGH BLADE
ASSEMBLY
USING THE CHOPPING BLADE ASSEMBLY
1Review warning and caution statements on page 10
before proceeding to number 2.
2Place the motor base on a clean, dry, level surface such
as a counter or table top. Press down on the motor
base to make sure that the suction cups adhere to the
counter or table top.
3Secure the bowl onto the motor base.
4Holding the Chopping Blade Assembly by the shaft,
place it onto the gear shaft inside the bowl. Ensure that
the Chopping Blade Assembly fits around the gear shaft
and that it is standing straight. (Fig. 1)
5 Add the ingredients and secure the bowl lid onto the
bowl.
6Plug the power cord into the electrical outlet and press
on the power button ( ). Select the speed or Auto-iQ™
program that best suits your needs. Pulse ingredients
for even chopping by holding the Auto-iQ Pulse button
until your desired consistency is reached.
NOTE: Please refer to “Speed Settings & Uses” chart
for suggested uses and speeds.
7When you have reached your desired consistency, stop
the appliance by pressing the power button ( ) and
wait for the blade to stop turning. (Fig. 2)
8To remove the lid, press the release button on the lid
and pull the lid handle up to a 90°angle. (Fig. 2)
9Turn the bowl counter-clockwise and lift it to remove it
from the motor base. (Fig. 3)
10 To release the motor base from the counter or table top,
place your hands underneath both sides of the motor
base and gently pull the unit up and towards you.
(Fig. 4)
USING THE DOUGH BLADE ASSEMBLY
1Review warning and caution statements on page 10
before proceeding to number 2.
2Place the motor base on a clean, dry, level surface such
as a counter or table top. Press down on the motor
base to make sure that the suction cups adhere to the
counter or table top.
3Secure the bowl onto the motor base.
4 Holding the Dough Blade Assembly by the shaft, place
it onto the gear shaft inside the bowl. Ensure that the
Dough Blade Assembly fits around the gear shaft and
that it is standing straight. (Fig. 5)
5 Add the ingredients and secure the bowl lid onto the
bowl.
6Plug the power cord into the electrical outlet and press
on the power button ( ). Select the LOW/DOUGH
button and process until ingredients come together to
form a mass.
NOTE: Please refer to “Speed Settings & Uses” chart
for suggested uses and speeds.
7 Once finished making dough, stop the appliance by
pressing the power button ( ) and wait for the blade to
stop turning.
8 To remove the lid, press the release button on the lid
and pull the lid handle up to a 90° angle. (Fig. 2)
9Turn the bowl counter-clockwise and lift it to remove it
from the motor base. (Fig. 3)
10 To release the motor base from the counter or table top,
place your hands underneath both sides of the motor
base and gently pull the unit up and towards you.
(Fig. 4)

12
www.ninjakitchen.com
WARNING: Handle the Pro Extractor Blades®Assembly with care, as the blades are sharp.
WARNING: Remove utensils prior to processing. Failure to remove may cause the Nutri Ninja cup to be
damaged or to shatter, which may cause personal injury.
WARNING: Never leave the appliance unattended while in use.
CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the
user being burned.
CAUTION: Remove the Pro Extractor Blades Assembly from the cup upon completion of blending. Some
ingredients have the potential to expand after blending resulting in excessive pressure buildup that can
pose a risk of injury.
IMPORTANT: Make sure that the motor base is plugged in for use.
NOTE: Nutri Ninja®| Ninja® Blender with Auto-iQ™Technology
can sense which jar is on the motor base. The available
function lights will illuminate depending on which jar is placed
on the motor base. (Fig. 1)
1 Review warning and caution statements above before
proceeding to number 2.
2Place the motor base on a clean, dry, level surface such as a
counter or table top. Press down on the motor base to make
sure that the suction cups adhere to the counter or table top.
3Add ingredients to the Nutri Ninja cup.
4Place the Pro Extractor Blades®onto the cup and tightly
screw it on clockwise until you have a good seal. (Fig. 2)
5Turn the Nutri Ninja cup upside down and place it onto the
motor base, aligning the tabs on the cup with the motor base.
Rotate the Nutri Ninja cup clockwise until it locks in place, you
will hear a click when the lock is engaged. (Fig. 3)
6Press the power button on, and select the speed or Auto-iQ
program that suits your needs. (Fig. 4) The Auto-iQ program
will stop the appliance automatically at the end of the
program.
Fig. 2 Fig. 3
Assembly and Use of the Nutri Ninja®Cups
Fig. 4 Fig. 5 Fig. 6
ASSEMBLY USE REMOVAL
7To pause the appliance, press the selected speed or Auto-iQ
program a second time. When the program is paused, the
light on the program button will flash until you press it again
to resume the rest of the program.
8Once you have reached your desired consistency, stop the
appliance by pressing the power button and wait for the blade
to stop turning. Turn the Nutri Ninja cup counter-clockwise
and pull straight up to remove. (Fig. 5, Fig. 6)
NOTE: Do not overfill! To avoid spilling, do not add ingredients
past the “Max Liquid” line.
9Turn the cup upright and remove the Pro Extractor Blades by
twisting the Pro Extractor Blades counter clockwise.
10 Place the Sip & Seal®lid onto the Nutri Ninja cup, twist to seal
and enjoy!
11 Make sure that the motor base is unplugged when not in use.
12 To release the motor base from the
counter or table top, place your hands
underneath both sides of the motor
base and gently pull the unit up and
towards you.
Fig. 1

13 1-877-646-5288
Programs, Speed Settings & Uses for the Pitcher
Programs, Speed Settings & Uses for the Food Processor Bowl
FUNCTION CONTAINER BLADE
TYPE
SPEED or
PROGRAM TYPE OF FOOD
Frozen Drinks /
Ice Crush Pitcher Stacked Blade Assembly
Auto-iQ™Frozen Drinks/
Smoothies
Ice
Frozen Drinks
Smoothies
Pureeing Pitcher Stacked Blade
Assembly Auto-iQ Food Puree
Smoothies
Soups*
Milkshakes
FUNCTION CONTAINER BLADE
TYPE
SPEED or
PROGRAM TYPE OF FOOD
Mincing Food Processor
Bowl
Chopping
Blade
Assembly
Auto-iQ Pulse
Onion
Garlic
Herbs
Kneading and
Dough Mixing
Food Processor
Bowl
Dough Blade
Assembly Low/Dough
Bread Dough
Pie Dough
Pizza Dough
Pretzel Dough
Cookie Dough
Processing Food Processor
Bowl
Chopping
Blade
Assembly
Auto-iQ Food Puree
Low/Dough
Medium
High
Pâtés
Stewed Fruits
Dips
Apple Sauce
Spreads
Baby Food
Emulsifying Food Processor
Bowl
Chopping
Blade
Assembly
Low/Dough
Medium
Salad Dressings
Dips
Sauces*
Grinding Food Processor
Bowl
Chopping
Blade
Assembly
Medium Meat
Grating Food Processor
Bowl
Chopping
Blade
Assembly
Auto-iQ Pulse
High
Grated Cheese
Bread Crumbs
Spices
Chopping Food Processor
Bowl
Chopping
Blade
Assembly
Auto-iQ Pulse
Salsa
Vegetables
Nuts
Batters Food Processor
Bowl
Dough Blade
Assembly Low/Dough Cake Mixes Batters
* When blending soups or sauces, make sure they’re cooled to room temperature first - Ninja containers
are not intended for hot blending.
* When blending soups or sauces, make sure they’re cooled to room temperature first - Ninja containers
are not intended for hot blending.

14
www.ninjakitchen.com
Programs, Speed Settings & Uses for the Nutri Ninja®Cup
FUNCTION CONTAINER BLADE
TYPE
SPEED or
PROGRAM TYPE OF FOOD
Smoothies Nutri Ninja Cup
Pro Extractor
Blades®
Assembly
Nutri Ninja Auto-iQ™
Blend
Smoothies
Frappes
Milkshakes
Protein Drinks
Green Smoothies Nutri Ninja Cup
Pro Extractor
Blades
Assembly
Nutri Ninja Auto-iQ
Ultra Blend
Frozen Fruits
Frozen Vegetables
Kale
Celery
Spinach
Seeds
Ice
Grating Nutri Ninja Cup
Pro Extractor
Blades
Assembly
Auto-iQ Pulse
High
Grated Cheese
Bread Crumbs
Spices
Chopping Nutri Ninja Cup
Pro Extractor
Blades
Assembly
Auto-iQ Pulse
High
Salsa
Vegetables
Nuts

15 1-877-646-5288
HOW TO CLEAN
CAUTION: Make sure that the motor base is
unplugged from the power source before inserting
or removing any blade assembly and before
cleaning.
CAUTION: DO NOT immerse the motor base into
water or any other liquid.
1Separate/remove all parts from each other.
2 Hand Washing: Wash the containers, lids and blade
assemblies in warm, soapy water. When washing the
blade assemblies, use a dish-washing utensil with a
handle to avoid direct hand contact with blades. Handle
blade assemblies with care to avoid contact with sharp
edges. Rinse and air dry thoroughly.
Dishwasher: The containers, lids, blade assemblies
and attachments are all dishwasher safe. The lids and
blade assemblies are top rack dishwasher safe. Ensure
the blade assembly is removed from the container
before placing in the dishwasher.
WARNING: Handle the Blade Assemblies with
care when washing, as the blades are sharp.
Contact with the blades’ edges can result in
laceration.
3 Wipe the motor base clean with a damp cloth .
Please call customer service if any servicing needs to be
performed on the appliance at 1-877-646-5288.
Care & Maintenance
HOW TO STORE
1 Store the Nutri Ninja®
|
Ninja®Blender System with
Auto-iQ™Technology upright with the blade assembly
inside the corresponding container with the lid secured
on top. Do not place anything on top. Store the rest
of the attachments in a safe place where they will not
be damaged and won’t cause harm. Loosely w rap the
power cord around the cord wrap on the back of the motor
base.
RESETTING THE MOTOR THERMOSTAT
The Nutri Ninja
|
Ninja Blender System with
Auto-iQ Technology features a unique safety system
which prevents damage to the unit’s motor and
drive system should you inadvertently overload your
appliance. If the appliance is being overloaded,
the motor will stop. Allow the appliance to
cool for approximately 15 minutes. To reset the
appliance, follow the resetting procedure below:
1 Unplug the appliance from the electrical outlet.
2 Remove and empty the container and ensure that no
food is jamming the blade assemblies or attachments.
3 Allow the appliance to cool for approximately 15
minutes.
4 Re-install the container onto the base and re-plug the
appliance into the electrical outlet.
5 Proceed to use the appliance as before making sure not
to exceed the recommended maximum capacities.

16
www.ninjakitchen.com
PROBLEMS POSSIBLE REASONS & SOLUTIONS
Motor doesn’t start or Blade
Assembly doesn’t rotate.
Make sure the container is securely placed on motor base.
Make sure the lid is securely on container in the correct position (align
arrows).
The appliance is turned “Off”. Press the power button ( ) to turn “On”.
Check that the plug is securely inserted into the electrical outlet.
Check the fuse or circuit breaker.
The unit has overloaded. The appliance will stop and the power light will
flash. Unplug and wait approximately 15 minutes before using again.
The unit has overheated. Unplug and wait approximately 15 minutes before
using again.
Check to make sure the unit is not overloaded.
Food is unevenly chopped.
Either you are chopping too much food at one time, or the pieces are not of
even size and processing smaller amounts per batch.
Food is chopped too fine or is
too watery.
The food has been over processed. Use Auto-iQ™Pulse button for
controlled processing.
Food collects on lid or on the
sides of the container.
The mixture is too thick. Add more liquid.
You cannot achieve snow
from solid ice.
Do not use ice that has been sitting out or has started to melt. Use ice
straight from the freezer.
Start with a few pulses and then go to a continuous blending cycle.
Motor base won’t stick to
counter or table top.
Make sure surface and suction feet are wiped clean. Suction feet will only
stick to smooth surfaces. Suction feet WILL NOT stick on some surfaces
such as, wood, tile and non-polished finishes.
DO NOT attempt to use appliance when the motor base is stuck to a
surface that is not secure, (cutting board, platter, plates, etc.).
You get an “Err” message.
Your Ninja is able to detect which jar is on the base. You may be trying
to use a program that is not designed for the jar you have installed. The
programs will light up indicating which programs are available for each jar.
You have a blinking red light.
The unit is not installed properly. For your safety the unit will only be able to
be turned on when it is properly assembled. Please refer to the assembly
pages of this inspiration guide for assistance.
Troubleshooting Guide
Replacement Parts
ORDERING REPLACEMENT PARTS
To order additional parts and attachments, please visit our website: www.ninjakitchen.com
or feel free to contact customer service: 1-877-646-5288.

17 1-877-646-5288
Notes

18
www.ninjakitchen.com
Product Registration
Please visit www.ninjakitchen.com or call 1-877-646-5288 to register your new Ninja™product within ten (10) days of
purchase. You will be asked to provide the store name, date of purchase and model number along with your name and address.
The registration will enable us to contact you in the unlikely event of a product safety notification. By registering you
acknowledge to have read and understood the instructions for use, and warnings set forth in the accompanying instructions.
ONE (1) YEAR LIMITED WARRANTY
SharkNinja Operating LLC warrants this product to be free from material defects and workmanship for a period of one (1)
year from the date of purchase when utilized for normal household use, subject to the following conditions, exclusions and
exceptions.
The liability of SharkNinja Operating LLC is limited solely to the cost of the repair or replacement of the unit at our option.
This Limited Warranty does not cover normal wear of parts and does not apply to any unit that has been tampered with or
used for commercial purposes. This Limited Warranty does not cover damage caused by misuse, abuse, negligent handling or
damage due to faulty packaging or mishandling in transit. This Limited Warranty does not cover damage or defects caused by
or resulting from damages from shipping or repairs, service or alteration to the product or any of its parts, which have been
performed by a repair person not authorized by SharkNinja Operating LLC.
If your appliance fails to operate properly while in use under normal household conditions within the warranty period, return
the complete appliance and accessories, freight prepaid. For assistance with warranty service options or customer support,
please call our customer care and product specialists at , call 1-877-646-5288 or visit our website www.ninjakitchen.com.
If the appliance is found to be defective in material or workmanship, SharkNinja Operating LLC will repair or replace it free of
charge. Proof of purchase is required and a fee of $19.95 will apply to cover the cost of return freight. *
This Limited Warranty is extended to the original purchaser of the unit and excludes all other legal, implied and/or conventional
warranties. The responsibility of SharkNinja Operating LLC if any, is limited to the specific obligations expressly assumed
by it under the terms of this Limited Warranty. In no event is SharkNinja Operating LLC liable for incidental or consequential
damages to anyone of any nature whatsoever. Some states do not permit the exclusion or limitation of incidental or
consequential damages, so the above may not apply to you.
This Limited Warranty gives you specific legal rights, and you may also have other rights which vary from state to state or from
province to province.
*IMPORTANT: Carefully pack item to avoid damage in shipping. Be sure to include proof of purchase date and
to attach tag to item before packing with your name, complete address and phone number with a note giving
purchase information, model number and what you believe is the problem with the item. We recommend you
insure the package (as damage in shipping is not covered by your Limited Warranty). Mark the outside of your
package “ATTENTION CUSTOMER SERVICE”.

SharkNinja Operating LLC
US: Newton, MA 02459
CAN: Ville St-Laurent, QC H4S 1A7
1-877-646-5288
www.ninjakitchen.com
Copyright © SharkNinja Operating LLC 2016
Ninja, Nutri Ninja, Pro Extractor Blades, SharkNinja, and Sip & Seal are registered trademarks of
SharkNinja Operating LLC.
Auto-iQ is a trademark of SharkNinja Operating LLC
For SharkNinja U.S. Patent information visit sharkninja.com/USPatents.
Illustrations may differ from actual product. We are constantly striving to improve our products, therefore the
specifications contained herein are subject to change without notice.
Printed in China
BL682Z_30_160210.2