Ninja CT610 Series User manual

ninjakitchen.com
1-877-646-5288
INSTRUCTIONS
Professional Touchscreen
Blender
CT610
Series

1
1-877-646-5288
THANK YOU
for purchasing the Ninja® Professional Touchscreen Blender
PLEASE READ CAREFULLY AND KEEP FOR FUTURE
REFERENCE.
These instructions are designed to help youget a complete
understanding of your new Ninja Professional Touchscreen Blender.
If you have any questions, please call our customer service
line at 1-877-646-5288.
TECHNICAL SPECIFICATIONS
Voltage: 120V, 60Hz
Watts: 1000W
TIP: You can find the
model and serial numbers
on the QR code label
located on the back of the
motor base.
RECORD THIS INFORMATION
Model Number: ��������������������������������������
Serial Number: ��������������������������������������
Date of Purchase (Keep receipt): �����������������������
Store of Purchase: �����������������������������������
REGISTER YOUR PURCHASE
registeryourninja.com
1-877-646-5288
Scan QR code using mobile device

2
ninjakitchen.com
ENGLISH
CONTENTS
Important Safety Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Getting to Know Your Ninja® Professional Touchscreen
Blender . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
AUTO-iQ® Mode� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 9
MANUAL Mode � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 9
Before First Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Using Your Total Crushing® Pitcher . . . . . . . . . . . . . . . . . . . . . . 11
Care & Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Cleaning � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �15
Storing� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �15
Resetting the Motor Thermostat� � � � � � � � � � � � � � � � � � � � � � � � � � �15
Ordering Replacement Parts � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 15
Troubleshooting Guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

3
1-877-646-5288
1Read all instructions prior to using the
appliance and its accessories.
2Carefully observe and practice all warnings
and instructions. This unit contains
electrical connections and moving parts
that potentially present risk to the user.
3This product is provided with a Stacked
Blade Assembly. ALWAYS exercise
care when handling the Stacked Blade
Assembly. The Stacked Blade Assembly is
sharp and is NOT locked to the container.
It is designed to be removable to facilitate
cleaning and replacement if needed.
ALWAYS grasp the Stacked Blade
Assembly by the top of the shaft. Failure to
use care when handling the Stacked Blade
Assembly will result in a risk of laceration.
4Take your time and exercise care during
unpacking and appliance setup. This
appliance contains sharp, loose blades that
can cause injury if mishandled.
5Take inventory of all contents to ensure you
have all parts needed to properly and safely
operate your appliance.
6Unplug the appliance from the outlet
when not in use, before assembling or
disassembling parts, and before cleaning.
To unplug, grasp the plug by the body and
pull from the outlet. NEVER unplug by
grasping and pulling the flexible cord.
7Wash all parts that may contact food
before use. Follow washing instructions
covered in this instruction manual.
8To protect against the risk of electric shock,
DO NOT submerge the appliance or allow
the power cord to contact any form of
liquid.
9DO NOT use this appliance outdoors. It is
designed for indoor household use only.
10 This appliance has a polarized plug (one
blade is wider than the other). To reduce
the risk of electric shock, this plug will fit
in a polarized outlet only one way. If the
plug does not fit fully in the outlet, reverse
the plug. If it still does not fit, contact a
qualified electrician. DO NOT modify the
plug in any way.
IMPORTANT SAFETY INSTRUCTIONS
PLEASE READ CAREFULLY BEFORE USE • FOR HOUSEHOLD USE ONLY
WARNING
To reduce the risk of injury, fire, electrical shock or property damage, basic
safety precautions must always be followed, including the following numbered
warnings and subsequent instructions.

4
ninjakitchen.com
ENGLISH
11 DO NOT operate any appliance with
a damaged cord or plug, or after the
appliance malfunctions or is dropped or
damaged in any manner. This appliance
has no user-serviceable parts. If damaged,
contact SharkNinja for servicing.
12 This appliance has important markings on
the plug blade. The entire supply cord is
not suitable for replacement. If damaged,
please contact SharkNinja for service.
13 Extension cords should not be used with
this appliance.
14 DO NOT allow young children to operate
this appliance or use as a toy. Close
supervision is necessary when any
appliance is used near children.
15 This appliance is not intended to be used
by people (including children) with reduced
physical, sensory, or mental capabilities,
or lack of experience and knowledge,
unless they have been given supervision or
instruction concerning use of the appliance
by a person responsible for their safety.
16 Before each use, inspect blade assemblies
for damage. If a blade is bent or damage is
suspected, contact SharkNinja to arrange
for replacement.
17 DO NOT attempt to sharpen blades.
18 DO NOT allow the cord to hang over the
edges of tables or counters. The cord may
become snagged and pull the appliance off
the work surface.
19 DO NOT allow the unit or the cord to
contact hot surfaces, including stoves and
other heating appliances.
20 ALWAYS use the appliance on a dry and
level surface.
21 NEVER place a blade assembly on the
motor base without it first being attached
to its corresponding pitcher and lid.
CONTINUED ON PAGE 5
SAVE THESE INSTRUCTIONS

5
1-877-646-5288
22 Keep hands, hair, and clothing out of the
container when loading and operating.
23 ONLY use attachments and accessories
that are provided with the product or are
recommended by SharkNinja. The use of
attachments not recommended or sold by
SharkNinja may cause fire, electric shock,
or injury.
24 During operation and handling of the
appliance, avoid contact with moving parts.
25 DO NOT operate the appliance with an
empty container.
26 DO NOT fill containers past the max fill or
max liquid lines.
27 DO NOT microwave any containers or
accessories provided with the appliance.
28 Before operation, ensure all utensils are
removed from containers. Failure to remove
utensils can cause containers to shatter
and potentially result in personal injury and
property damage.
29 Keep hands and utensils out of container
while blending to reduce the risk of severe
injury to persons or damage to the blender.
A scraper or spatula may be used but must
be used ONLY when the blender is not
running.
30 NEVER operate the appliance without lids
and caps in place. DO NOT attempt to
defeat the interlock mechanism. Ensure
the container and lid are properly installed
before operation.
31 DO NOT expose the containers and
accessories to extreme temperature
changes. They may experience damage.
32 NEVER leave the appliance unattended
while in use.
33 DO NOT open pour spout cover while
blender is operating.
34 DO NOT blend hot liquids. Doing so may
result in a pressure buildup and steam
exposure that can pose a risk of the user
being burned.
IMPORTANT SAFETY INSTRUCTIONS
PLEASE READ CAREFULLY BEFORE USE • FOR HOUSEHOLD USE ONLY
WARNING
To reduce the risk of injury, fire, electrical shock or property damage, basic
safety precautions must always be followed, including the following numbered
warnings and subsequent instructions.

6
ninjakitchen.com
ENGLISH
SAVE THESE INSTRUCTIONS
35 If you find unmixed ingredients sticking to
the sides of the pitcher, stop the appliance,
remove the lid, and use a scraper or
spatula to dislodge ingredients. NEVER
insert your hands into the pitcher, as
you may contact one of the blades and
experience a laceration.
36 DO NOT attempt to remove the container
and lid from the motor base while the
motor and Stacked Blade Assembly are still
spinning. Allow the appliance to come to a
complete stop before removing the lid and
pitcher.
37 Upon completion of blending, ensure
the Stacked Blade Assembly is removed
BEFORE emptying pitcher contents. The
Stacked Blade Assembly is to be removed
by grasping the top of the shaft and lifting
from the pitcher. Failure to remove the
Stacked Blade Assembly before emptying
the pitcher can result in a risk of laceration.
38 If the appliance overheats, a thermal switch
will activate and temporarily disable the
motor. To reset, unplug the appliance
and allow it to cool for approximately 15
minutes before using again.
39 The maximum wattage rating for this
appliance is based on the configuration
of the Stacked Blade Assembly and Total
Crushing®Pitcher. Other configurations
may draw less power or current.
40 DO NOT spray the motor base or
touchscreen with water or other liquids.
41 Turn off the appliance and unplug the
motor base before cleaning.

7
1-877-646-5288
GETTING TO KNOW YOUR
NINJA® PROFESSIONAL TOUCHSCREEN BLENDER
WELCOME!
Congratulations on
your purchase. Use this
Owner’s Guide to learn
about the great features
of your Ninja Professional
Touchscreen Blender.
From assembly to use
to maintenance, you will
find it all in here.
MAIN UNIT
AMotor Base with Touchscreen
B Pitcher Lid
C 72 oz. Total Crushing®Pitcher*
D Stacked Blade Assembly
NOTE: The top flap of
your box shows the select
accessories that are
included with your model.
If you have any questions,
concerns, or feedback, we’d
love to hear from you. Give us
a call at 1-877-646-5288 or
visit ninjakitchen.com.
To learn more about our
products and to find
great recipes, please visit
ninjakitchen.com.
*64 oz. max liquid capacity.

8
ninjakitchen.com
ENGLISH
A
B
C
D

9
1-877-646-5288
FEATURES
MANUAL MODE:
PULSE
Offers greater control of pulsing and blending. Operates only when
the PULSE button is pressed. Use short presses for short pulses.
LOW/HIGH
Select your preferred speed for ultimate control.
DID YOU KNOW?
• The pitcher, Stacked Blade
Assembly, and lid are BPA
free and dishwasher safe.
IMPORTANT: Review all
warnings on pages 3–6
before proceeding.
INTUITIVE TOUCHSCREEN
The intuitive touchscreen features illuminated controls that
guide you through program selection without all the guesswork.
The power symbol should be used to turn your appliance
on or off.
AUTO-iQ® MODE:
Features intelligent programs that combine unique pulsing,
blending, and pausing patterns that do the work for you.
SMOOTHIE
Great for creamy, super-smooth drinks made from frozen
fruit, ice, or milks.
FROZEN DRINK
Takes all the guesswork out of turning ice, juice, and fruit
into expertly blended frozen drinks.
PUREE
Automatically blends your ingredients to create silky-smooth
dips and sauces.

10
ninjakitchen.com
ENGLISH
BEFORE FIRST USE
1Remove all packaging materials from the unit. Exercise care when unpacking the Stacked
Blade Assembly as it is sharp.
2 The Stacked Blade Assembly is NOT locked in place in the pitcher. Handle the Stacked
Blade Assembly by grasping the top of the shaft.
3 Wash the pitcher, lid, and Stacked Blade Assembly in warm, soapy water using a
dishwashing utensil with a handle to avoid direct contact with the blades. Exercise care when
handling the Stacked Blade Assembly, as the blades are sharp.
4 Thoroughly rinse and air-dry all parts.
5 All attachments are dishwasher safe. It is recommended that the lid and Stacked Blade
Assembly be placed on the top rack of the dishwasher. Ensure the Stacked Blade Assembly
is removed from the pitcher before placing in the dishwasher. Exercise care when handling
the Stacked Blade Assembly.
6 Wipe touchscreen with a soft cloth. Allow it to dry completely before using.

11
1-877-646-5288
TIP: If the Stacked Blade
Assembly is not fully
seated, you will not be
able to install and lock the
lid into position.
TIP: To learn more about
the unit’s programs, refer
to page 9.
NOTE: DO NOT add
ingredients before
completing installation
of the Stacked Blade
Assembly.
NOTE: The pitcher can
be installed in two different
orientations. The handle
can be positioned on the
front-right corner of the
motor base or the front-left
corner of the motor base.
USING YOUR TOTAL CRUSHING® PITCHER
IMPORTANT: Review all
warnings on pages 3–6
before proceeding.
1Plug in motor base and
place on a clean, dry,
level surface such as a
countertop or table.
2Lower the pitcher onto the
motor base. The handle
should be aligned slightly
to the right and the pitcher
should be oriented so the
LOCK symbols on the
motor base are visible.

12
ninjakitchen.com
ENGLISH
3Rotate the container to the
left until you hear a click.
4Exercising care, grasp the
Stacked Blade Assembly
by the top of the shaft and
place it onto the drive gear
inside the pitcher. Note
that the Stacked Blade
Assembly will fit loosely
onto the drive gear.
5Add ingredients, making
sure to not exceed the
Max Fill line marked on the
side of the pitcher.
6Place the lid on the pitcher,
aligning the triangle
symbol located on the lid
with the triangle symbol
located on the pitcher’s
handle. Press down on
the handle until you hear a
click. The triangle symbols
MUST be aligned for the
lid to lock into place and
the unit to operate.

13
1-877-646-5288
USING YOUR TOTAL CRUSHING® PITCHER - CONT.
IMPORTANT: Review all
warnings on pages 3–6
before proceeding.
7AUTO-iQ® MODE
To begin, press the Power button. The unit will automatically
default to AUTO-iQ mode (the Mode button in the upper
right corner of the display will read AUTO-iQ). When
AUTO-iQ mode is selected, choose the pre-set program
that best suits your recipe. The pre-set feature will
automatically stop the unit at the end of the program. To
pause the unit at any time, press the currently active button
a second time, or press the Power button to cancel.
8MANUAL MODE
To begin, press the Power button and then press the Mode
button in the upper right corner of the display to change
from AUTO-iQ to MANUAL mode. Choose the speed that
best suits your recipe. The PULSE setting will run only when
touched. The LOW and HIGH settings will run continuously
until they are manually stopped. To pause the program,
press the active program button a second time.
TIP: Easily toggle between
AUTO-iQ and MANUAL
modes by pressing
the Mode button in the
upper right corner of the
touchscreen. Note that it
automatically defaults to
AUTO-iQ mode.

14
ninjakitchen.com
ENGLISH
9 Wait for the unit to come
to a complete stop before
removing the pitcher from
the motor base.
To remove the pitcher,
turn it counterclockwise
and lift it up.
10 For thinner mixtures, ensure
the lid is locked into place,
open the pour spout cap
on the lid, and empty the
contents of the pitcher
through the pour spout.
11 For thicker mixtures that
cannot be emptied through
the pour spout, remove
the lid and Stacked Blade
Assembly before pouring.
To remove the lid, press
the RELEASE button on
the lid and lift the handle.
The lid can then be
removed from the pitcher.
To remove the Stacked
Blade Assembly, carefully
grasp it by the top of the
shaft and remove from the
pitcher. The pitcher can
then be emptied.
12 Unplug the unit when
finished and release the
motor base from the work
surface. Refer to page 15
for storing instructions.

15
1-877-646-5288
CARE &
MAINTENANCE
CLEANING
1Separate all parts.
2Hand-Washing
Wash the pitcher, lid, and Stacked Blade
Assembly in warm, soapy water using a
dishwashing utensil with a handle to avoid
direct contact with the blades. Exercise care
when handling Stacked Blade Assembly as
the blades are sharp. Thoroughly rinse and
air-dry all parts.
Dishwasher
The pitcher, lid, and Stacked Blade
Assembly are dishwasher safe. It is
recommended that the lid and Stacked
Blade Assembly be placed on the top rack
of the dishwasher. Ensure the Stacked
Blade Assembly is removed from the
pitcher before placing in the dishwasher.
Exercise care when handling Stacked Blade
Assembly.
Motor Base
Turn off the unit and unplug the motor base
before cleaning. Wipe motor base with a
clean, damp cloth.
Clean the touchscreen with a soft cloth,
such as microfiber, to prevent scratching. To
remove residue from the touchscreen, you
may use an all-purpose cleaner.
Never spray the base or touchscreen with
water or other liquids.
DO NOT use abrasive cloths/pads/brushes
to clean the base or touchscreen, as this
can dull or scratch the surface.
STORING
Store your unit upright with the Stacked Blade
Assembly inside the pitcher and the lid secured
on top.
DO NOT stack items on top of the unit. Store
any remaining attachments alongside the unit
or in a cabinet where they will not be damaged
or create a hazard.
RESETTING THE MOTOR THERMOSTAT
This unit features a unique safety system
that prevents damage to the motor and drive
system should you inadvertently overload
it. If the unit is overloaded, the motor will be
temporarily disabled. Should this occur, follow
the reset procedure below.
1 Unplug the unit from the electricaloutlet.
2 Allow the unit to cool for approximately 15
minutes.
3 Remove the lid and Stacked Blade
Assembly from the pitcher. Empty the
pitcher and ensure no ingredients are
jamming the Stacked Blade Assembly.
4 Re-install the pitcher onto the base and plug
the unit into the electrical outlet.
5 Once the unit has been reset, you may
resume using it, making sure to not exceed
the maximum capacities.
IMPORTANT: Ensure that maximum
capacities are not exceeded. This is the
most typical cause of appliance overload.
If your unit needs servicing, please call
Customer Service at 1-877-646-5288.
ORDERING REPLACEMENT PARTS
To order additional parts and attachments,
please visit ninjakitchen.com or contact
Customer Service at 1-877-646-5288.

16
ninjakitchen.com
ENGLISH
TROUBLESHOOTING
GUIDE
WARNING: To reduce the risk of shock and unintended operation, turn
power o and unplug unit before troubleshooting.
Motor does not start or Stacked Blade Assembly does not rotate.
• Make sure the pitcher is securely placed on motor base.
• Make sure the lid is securely on the pitcher in the correct position (arrows aligned).
• If the unit is turned off, press the Power button to turn on.
• Check that the plug is securely inserted into the electrical outlet.
• Check the fuse or circuit breaker.
• Make sure the unit is not overloaded. If it is overloaded, it will stop and the Power light will
flash. Unplug and wait approximately 15 minutes before using again.
• If the unit has overheated, unplug and wait approximately 15 minutes before using again.
Food is chopped too fine or is too watery.
• The food has been over-processed. Try using the PULSE button for more controlled processing.
Food collects on lid or sides of pitcher.
• The mixture is too thick. Add more liquid.
You cannot create snow from ice.
• DO NOT use ice that has been sitting out or has started to melt. Use ice straight from the
freezer.
• Start with a few pulses and then use a continuous blending cycle.
You get an “--” message.
• Your Ninja
®
Professional Touchscreen Blender is able to switch between AUTO-iQ and
MANUAL modes. You may be trying to use a program that is not available for use with the
mode you have selected. Only those programs available for each mode will illuminate.
Unable to access Manual programs.
• The unit will automatically default to AUTO-iQ®mode. To switch from AUTO-iQ to MANUAL
mode, press the Mode button once to switch it from AUTO-iQ to MANUAL. Once pressed,
MANUAL will illuminate and the PULSE, LOW, and HIGH settings will be ready for use.
• To return the unit to AUTO-iQ mode, simply press the Mode button again.

17
1-877-646-5288
NOTES

18
ninjakitchen.com
ENGLISH
ONE (1) YEAR
LIMITED WARRANTY
The 1-Year Limited Warranty applies to purchases made from authorized retailers of SharkNinja Operating LLC.
Warranty coverage applies to the original owner and to the original product only and is not transferable.
SharkNinja warrants that the unit shall be free from defects in material and workmanship for a period of 1 year
from the date of purchase when it is used under normal household conditions and maintained according to the
requirements outlined in this Owner’s Guide, subject to the following conditions and exclusions.
What is covered by my warranty?
1. The original unit and/or non-wearable components deemed defective, in SharkNinja’s sole discretion,
will be repaired or replaced for up to one year from the original purchase date.
2. In the rare event that a replacement unit is issued, the warranty coverage ends six months after the
receipt date of the replacement unit or the remainder of the existing warranty, whichever is greater. If
the unit is replaced, SharkNinja reserves the right to replace the unit with one of equal or greater value.
What is not covered by my warranty?
Our Customer Service/Product Specialists are available to provide all the warranty service options available to
you, including the possibility of upgrading to our VIP Warranty Service Options for select product categories.
1. Normal wear and tear of wearable parts (including all blending vessels, lids, blades and blender base)
which require regular maintenance and/or replacement to ensure the proper functioning of your unit are
not covered by this warranty.
2. Any unit that has been tampered with or used for commercial purposes.
3. SharkNinja will cover the cost for the customer to send the unit to us for repair or replacement. A fee
of $19.95 for return shipping costs will be charged at the time of return shipment of the repaired or
replacement unit.
4. Damage caused by misuse, abuse, or negligent handling, or damage due to mishandling in transit.
5. Consequential and incidental damages.
6. Defects caused by or resulting from damages from shipping or from repairs, service, or alteration to the
product or any of its parts which have been performed by a repair person not authorized by SharkNinja.
7. Products purchased, used or operated outside of North America.
Problems with your unit/How to get service:
If your appliance fails to operate properly while in use under normal household conditions within the warranty
period, visit ninjakitchen.com for product care/maintenance self-help. Our Customer Service and Product
Specialists are also available at 1-877-646-5288 to assist with product support and warranty service options.
How to initiate a warranty claim:
You can call 1-877-646-5288 to have a Customer Service specialist assist you. Please note, you must call 1-877-
646-5288 to initiate a warranty claim. Return and Packing Instruction information will be provided at that time.
For Customer Service hours, visit ninjakitchen.com
Replacement parts are available for purchase at ninjaaccessories.com. For more information on what are
classified as wearable and non-wearable parts, please visit ninjakitchen.com/warranty
This warranty gives you specific legal rights, and you may also have other rights that vary from state to state.
Some states do not permit the exclusion or limitation of incidental or consequential damages, so the above
may not apply to you.

@ninjakitchen
SharkNinja Operating LLC
US: Needham, MA 02494
CAN: Ville St-Laurent, QC H4S 1A7
1-877-646-5288
ninjakitchen.com
Illustrations may differ from actual product. We are constantly striving to improve our products;
therefore the specifications contained herein are subject to change withoutnotice.
AUTO-IQ, NINJA, and TOTAL CRUSHING are registered trademarks of SharkNinja Operating LLC.
For SharkNinja U.S. Patent information, visit sharkninja.com/USPatents.
© 2017 SharkNinja Operating LLC
CT610�Series�IB�E�170630�MP
PRINTED IN CHINA