Ninja FIT QB3001ANZ User manual

FIT
QB3001ANZ
OWNER’S GUIDE
AU ninjakitchen.com.au
NZ ninjakitchen.co.nz

3
AU ninjakitchen.com.au | NZ ninjakitchen.co.nz
2AU 02 8801 7666 | NZ 0800 112 660
Important Safeguards� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 4
Getting to Know Your Ninja® Fit � � � � � � � � � � � � � � � � � � � � � 6
Before First Use � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 6
Blending Instructions � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 7
Care & Maintenance� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 8
Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Storing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Resetting the Motor Thermostat. . . . . . . . . . . . . . . . . . . . . . . 8
Troubleshooting Guide� � � � � � � � � � � � � � � � � � � � � � � � � � � � � 9
Replacement Parts ��������������������������������9
Product Registration�������������������������������9
Warranty ����������������������������������������10
PLEASE READ CAREFULLY AND
KEEP FOR FUTURE REFERENCE�
TECHNICAL SPECIFICATIONS
Voltage: 220-240V~, 50-60Hz
Power: 700 Watts
CUP CAPACITY:
470 ml
RECORD THIS INFORMATION
Model Number: �����������������
Serial Number: ������������������
Date of Purchase: ����������������
(Keep receipt)
Store of Purchase: ���������������
REGISTER YOUR PURCHASE
AU ninjakitchen.com.au
NZ ninjakitchen.co.nz
CONTENTS
THANK YOU
for purchasing your Ninja® Fit

4 5
AU 02 8801 7666 | NZ 0800 112 660 AU ninjakitchen.com.au | NZ ninjakitchen.co.nz
Read and review instructions for operation and use�
Indicates the presence of a hazard that can cause personal injury,
death or substantial property damage if the warning included with this
symbol is ignored�
For indoor and household use only�
When using electrical appliances, basic safety precautions should always be
followed, including the following:
SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
PLEASE READ CAREFULLY BEFORE USE • FOR HOUSEHOLD USE ONLY
WARNING
To reduce the risk of injury, fire, electrical shock or property damage, basic safety
precautions must always be followed, including the following numbered warnings
and subsequent instructions� Do not use appliance for other than intended use�
1Read all instructions prior to using the
appliance and its accessories.
2Carefully observe and follow all warnings
and instructions. This unit contains
electrical connections and moving parts
that potentially present risk to the user.
3ALWAYS exercise care when handling the
Blade Assembly. The blades are sharp.
ONLY grasp the Blade Assembly by the
outer perimeter of the blade assembly
base. Failure to use care when handling
the blade assembly will result in a risk of
laceration.
4Take your time and exercise care during
unpacking and appliance setup. This
appliance contains sharp, loose blades
that can cause injury if mishandled.
5Take inventory of all contents to ensure
you have all parts needed to properly
and safely operate your appliance.
6Turn the appliance OFF, then unplug the
appliance from the socket when not in
use, before assembling or disassembling
parts, and before cleaning. To unplug,
grasp the plug by the body and pull from
the socket. NEVER unplug by grasping
and pulling the flexible cord.
7Before use, wash all parts that may
contact food. Follow washing instructions
covered in this instructionmanual.
8Blades are sharp. Handle carefully.
9To protect against the risk of electric
shock, DO NOT submerge the appliance
or allow the power cord to contact any
form of liquid.
10 DO NOT use this appliance outdoors. It is
designed for indoor household use only.
11 DO NOT operate any appliance with
a damaged cord or plug, or after the
appliance malfunctions or is dropped
or damaged in any manner. This
appliance has no user-serviceable parts.
If damaged, contact SharkNinja for
servicing.
12 DO NOT abuse the power cord. Never
carry the appliance by the power cord
or yank it to disconnect from electrical
socket; instead grasp the plug and pull to
disconnect.
13 Extension cords should NOT be used
with this appliance.
14 DO NOT allow children to operate this
appliance, to play with it, or use as a toy.
Keep the appliance and its cord out of
reach of children.
15 This appliance is NOT intended to be
used by people (including children)
with reduced physical, sensory, or
mental capabilities, or lack of experience
and knowledge, unless they are given
supervision or instruction concerning use
of the appliance by a person responsible
for their safety.
16 Before each use, inspect blade
assemblies for damage. If a blade is
bent or damage is suspected, contact
SharkNinja to arrange for replacement.
17 DO NOT attempt to sharpen blades.
18 Keep the appliance and its cord out of
reach of children.
19 DO NOT allow the unit or the cord
to hang over the edges of tables or
worktops. The cord may become
snagged and pull the appliance o the
work surface.
20 DO NOT allow any part of the unit to
contact hot surfaces, including stoves
and other heating appliances.
21 ALWAYS use the appliance on a dry and
level surface.
22 NEVER place a blade assembly on
the motor base without it first being
attached to its corresponding container
(bowl, pitcher, cup) and lid.
23 ONLY use attachments and accessories
that are provided with the product or are
recommended by SharkNinja. The use of
attachments not recommended or sold
by SharkNinja may cause fire, electric
shock, or injury.
24 The use of attachments, including
canning jars, not recommended by the
manufacturer may cause a risk of injury
to persons.
DO NOT use stainless steel cup
accessory model XSKDWSS24 with
blender.
25 During operation and handling of the
appliance, avoid contact with moving
parts.
26 DO NOT operate the appliance with an
empty container.
27 DO NOT fill containers past the MAX
FILL or MAX LIQUID lines.
28 DO NOT microwave any containers or
accessories provided with the appliance.
29 DO NOT perform grinding operations
with the Single-Serve Cup and Blade
Assembly.
30 Before operation, ensure all utensils are
removed from containers. Failure to
remove utensils can cause containers to
shatter and potentially result in personal
injury and property damage.
31 Keep hands, hair, clothing, as well as
utensils out of container while processing
to reduce the risk of severe injury to
persons or damage to the appliance. A
scraper may be used but only when the
appliance is not running.
32 NEVER operate the appliance without
lids and caps in place. DO NOT attempt
to defeat the interlock mechanism.
Ensure the container and lid are properly
installed before operation.
33 DO NOT expose the containers and
accessories to extreme temperature
changes. They may experience damage.
34 NEVER leave the appliance unattended
while in use.
35 DO NOT blend hot liquids. Doing so may
result in pressure buildup and steam
exposure that can pose a risk of the user
being burned.
36 DO NOT remove the cup from the motor
base while the appliance is running.
37 Remove the Blade Assembly from the
Single-Serve Cup upon completion of
blending. DO NOT store ingredients
before or after blending them in the cup
with the blade assembly attached. Some
foods may contain active ingredients or
release gases that will expand if left in a
sealed container, resulting in excessive
pressure buildup that can pose a risk of
injury. For ingredient storage in the cup,
use only Sip & Seal™ Lid to cover.
38 The maximum wattage rating for this
appliance is based on the configuration
of the Blade Assembly and Single-Serve
Cup. Other configurations may draw less
power or current.
39 Max ON time is 1 minute under 900W
load. If the appliance overheats, a thermal
switch will become activated and shut o
the motor. To reset, unplug the appliance
and let it cool down for approximately
30 minutes before using again.
40 DO NOT process dry ingredients without
adding liquid to the Single-Serve Cup.
The Single-Serve Cup is not intended for
dry blending.
41
To protect against risk of electrical shock,
DO NOT immerse the motor base in
water or other liquid.
42 DO NOT spray the motor base with any
liquids. Turn o and unplug the motor
base before cleaning.
43 The maximum wattage rating for this
appliance is achieved by chopping
120g beef in the 470 ml (16 oz.) cup
for 5 seconds.

7
AU ninjakitchen.com.au | NZ ninjakitchen.co.nz
6AU 02 8801 7666 | NZ 0800 112 660
MAIN UNIT
AMotor Base
(attached power cord not shown)
BSip & Seal™ Lid (x2)
C470 ml Single-Serve Cups (x2)
DNinja Blade Assembly
C
A
B
D
To order additional parts
and accessories, visit:
AU ninjakitchen.com.au
NZ ninjakitchen.co.nz.
GETTING TO KNOW YOUR NINJA® FIT
DID YOU KNOW?
• You can take your drinks on the go using
the Sip & Seal Lids.
• The containers, blade assemblies, and
lids are BPA free and dishwasher safe.
NOTE: All attachments are dishwasher
safe. It is recommended that the lids,
containers and blade assemblies
be placed on the top rack of the
dishwasher. Ensure blade assemblies
and lids are removed from their
containers before placing in the
dishwasher. Exercise care when
handling blade assemblies.
NOTE: Handle the blade assembly
by grasping it around the perimeter
of the base.
1Remove all packaging materials from the
appliance. Exercise care when unpacking
blade assemblies. All blade assemblies
are sharp.
2Wash containers, lids, and blade
assemblies in warm, soapy, water using
a dishwashing utensil with a handle to
avoid direct contact with the blades.
Exercise care when handling blade
assemblies, as the blades are sharp.
3Thoroughly rinse and air-dry all parts.
BEFORE FIRST USE
2Place the blade assembly on the top of the
cup and turn clockwise to seal.
3
Turn cup upside down so the bottom of
the blade assembly is flat on the worktop.
4Place the cup upside down on the
motor base. Press down on the cup
to pulse or blend.
1Add ingredients to the Single-Serve
Cup. DO NOT add ingredients past
the MAX LIQUID line on the cup.
6Turn cup over so blade assembly is on
top. Twist blade assembly anti-clockwise
to remove. To take your blended
contents on the go, place the Sip & Seal
Lid on cup and turn clockwise to seal.
Do not store with the blades attached.
5When blending is complete, lift up the
cup to remove.
BLENDING INSTRUCTIONS

8AU 02 8801 7666 | NZ 0800 112 660 9AU ninjakitchen.com.au | NZ ninjakitchen.co.nz
CARE & MAINTENANCE
CLEANING
1Separate all parts.
2Wash all containers in warm, soapy
water with a soft cloth.
3 Hand-Washing
Wash cups, lids, and blade assembly in
warm, soapy water. Use a dishwashing
utensil with a handle to avoid direct
contact with the blades. Exercise care
when handling the blade assembly as the
blades are sharp. Thoroughly rinse and
air-dry all parts.
Dishwasher
Cups, lids, and blade assembly are
dishwasher safe. Place the cups, lids,
and blade assembly on the top rack of
the dishwasher ONLY. Ensure the blade
assembly and lid are removed from the
cup before placing in the dishwasher.
Motor Base
Turn o the unit and unplug the motor
base before cleaning. Wipe motor
base with a clean, damp cloth.
NEVER directly spray the base with
water or other liquids.
DO NOT use abrasive cloths/pads/
brushes to clean the base, as this can
dull or scratch the surface.
RESETTING THE
MOTOR THERMOSTAT
This unit features a unique safety system
that prevents damage to the motor and
drive system should you inadvertently
overload it. If the unit is overloaded, the
motor will be temporarily disabled. Should
this occur, follow the reset procedure below.
1Unplug the unit from the socket.
2Allow the unit to cool for approximately
30 minutes.
3Remove the container’s lid and blade
assembly. Empty the container and
ensure no ingredients are jamming
the blade assembly.
IMPORTANT: Ensure that maximum
capacities are not exceeded. This is
the most typical cause of appliance
overload.
TROUBLESHOOTING GUIDE
WARNING: To reduce the risk of shock and unintended operation,
turn power o and unplug unit before troubleshooting�
Motor doesn't start or blade assembly doesn't rotate
• Make sure the cup is securely placed onto the motor base.
• Check that the plug is securely inserted into the socket.
• Check fuse or breaker in your home. Replace the fuse/reset breaker.
• Check that the inside of the motor base is clean and there is no food blocking the
connection between the motor base and the cup.
• There is too much food in the container. Unplug the motor base. Remove some food
and try again.
• The unit has overheated. Unplug and wait approximately 15 minutes before using again.
Food collects on the sides of the cup
• Too much food is being processed at one time. Turn the motor base o. When the blades
stop rotating, remove the cup from the motor base. Remove some of the food being
processed.
Cannot make snow from ice
• Do not use ice that has been sitting out or has started to melt.
• Be sure to use short pulses in the beginning to break up large pieces.
REPLACEMENT PARTS
To order additional parts and attachments, visit AU ninjakitchen.com.au | NZ ninjakitchen.co.nz.
PRODUCT REGISTRATION
Please visit AU ninjakitchen.com.au | NZ ninjakitchen.co.nz to register your new Ninja®
product within ten (10) days of purchase. You will be asked to provide the store name,
date of purchase, and model number along with your name and address.
The registration will enable us to contact you in the unlikely event of a product safety
notification. By registering, you acknowledge you have read and understood the
instructions for use and warnings set forth in the accompanying instructions.

10 AU 02 8801 7666 | NZ 0800 112 660 11AU ninjakitchen.com.au | NZ ninjakitchen.co.nz
For guarantee claims, you will need to submit a proof of purchase in the form of a valid receipt
that displays date and place of purchase. This warranty does not replace but is in addition to your
statutory rights.
If your product becomes defective due to faulty material or workmanship within a period of 1 year
from the date of purchase, we warrant to do the following:
• For New Zealand Consumers: We will replace the defective/faulty part with a new product,
free of charge, or if the unit is deemed defective/faulty we replace the unit with an
equivalent or upgraded model, at our discretion.
• For Australian Consumers: Our goods come with guarantees that cannot be excluded under
the Australian Consumer Law. You are entitled to a replacement or refund for a major failure
and for compensation for any other reasonably foreseeable loss or damage. You are also
entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality
and the failure does not amount to a major failure.
Replacement items will be covered by the limited warranty for the balance of the warranty period
from the date of the original purchase. Please note:
Your warranty is subject to the following conditions
• DO NOT operate the appliance with a damaged plug or cord, or if the unit has been dropped,
damaged or dropped in water.
• To avoid the risk of electric shock, do not disassemble or attempt to repair the appliance on
your own. If the supply cord is damaged, it must be replaced by a qualified electrician to avoid
a hazard. Incorrect re-assembly or repair can cause a risk of electric shock or injury to persons
when the appliance is used.
• The item has not been misused, abused, neglected, altered, modified or repaired by anyone.
• The item has been subjected to fair wear and tear.
• The item has not been used for trade, professional or hire purposes.
•The item has not sustained damage through foreign objects, substances or accident
What is not covered?
• Accessories supplied with the item.
• Components that are subject to natural wear and tear caused by normal use in accordance with
operating instructions.
• Unauthorised/improper maintenance/handling or overload is excluded from this warranty.
Customer costs within warranty
The customer is responsible for any inwards freight charge to return a product for warranty if
requested, and outward freight charge for warranty parts and or replacement unit.
ONE (1) YEAR LIMITED REPLACEMENT WARRANTY
NOTES

Mann&Noble Pty Ltd
Building D, 33 Quarry Road
Erskine Park NSW, Australia, 2759
AU 02 8801 7666 | NZ 0800 112 660
AU ninjakitchen�com�au | NZ ninjakitchen�co�nz
Illustrations may dier from actual product. We are constantly striving to improve our products; therefore the
specifications contained herein are subject to change withoutnotice.
NINJA is a registered trademark of SharkNinja Operating LLC.
SIP & SEAL is a trademark of SharkNinja Operating LLC.
© 2021 SharkNinja Operating LLC.
PRINTED IN CHINA
QB3001ANZ�IB�MP�Mv6
VISIT US ONLINE AT:
AU ninjakitchen.com.au NZ ninjakitchen.co.nz
Or follow us on any of our social media pages:
@ninjakitchenapac