Ninja BL680A User manual

www.ninjakitchen.com
®BL680A
OWNER’S GUIDE

11-877-646-5288
IMPORTANT SAFETY INSTRUCTIONS
For Household Use Only
WHEN USING ELECTRICAL APPLIANCES,
BASIC SAFETY PRECAUTIONS SHOULD
ALWAYS BE FOLLOWED, INCLUDING THE
FOLLOWING:
READ ALL INSTRUCTIONS BEFORE
USING YOUR NUTRI NINJA®
| NINJA®
BLENDER SYSTEM WITH AUTO-iQ™
TECHNOLOGY.
POLARIZED PLUG
WARNING: To reduce the risk of
electric shock, this appliance has a polarized
plug (one blade is wider than the other). This
plug will fit into a polarized outlet only one
way. If the plug does not fit fully into the
outlet, reverse the plug. If it still does not fit,
contact a qualified electrician to install the
proper outlet. DO NOT modify the plug in
any way.
WARNING: Extension cords are not
recommended for use with this product.
WARNING: TO REDUCE THE RISK OF
FIRE, ELECTRIC SHOCK OR INJURY:
1 CAUTION: Blade assemblies are sharp
and removable, handle with care. When
handling the blade assemblies, always
hold by the shaft.
2CAUTION: DO NOT BLEND HOT FOODS
OR HOT LIQUIDS.
3CAUTION: We do not recommend
grinding in any of our Nutri Ninja®Cups.
4 To protect against electrical shock, do not
submerge the appliance or allow the power
cord to come into contact with water or any
other liquid.
5 DO NOT allow young children to operate the
appliance or use as a toy. Close supervision is
necessary when any appliance is used by or
near children.
6 Never leave an appliance unattended when
inuse.
7 Appliance accessories are not intended to
be used in the microwave as it may result in
damage to the accessories.
8 Turn the appliance Off and remove the power
cord from the electrical outlet when not in
use, before assembling or disassembling parts
and before cleaning. To unplug, grasp the plug
and pull from the electrical outlet. Never pull
from the power cord.
9 DO NOT abuse the power cord. Never carry
the appliance by the power cord or yank it
to disconnect from electrical outlet; instead
grasp the plug and pull to disconnect.

2
www.ninjakitchen.com
21 To reduce the risk of injury, NEVER operate
the appliance without the lid in place; DO NOT
try to defeat the interlock mechanism; make
sure that the attachment is properly installed
before operating the appliance.
22 DO NOT expose containers to extreme
temperaturechanges.
23 DO NOT overfill.
24 DO NOT operate the appliance empty.
25 To reduce the risk of burns, always allow the
appliance to cool before taking off parts and
before cleaning.
26 In the event that the unit overloads, the
control panel lights will flash and the unit
will shut down. Unplug the appliance and let
it cool down for approximately 15 minutes
before using again.
27 THIS PRODUCT IS INTENDED FOR
HOUSEHOLD USE ONLY. Do not use this
appliance for anything other than its intended
use. Do not use outdoors.
28 The maximum rating is based on the 6-Blade
Assembly (pitcher) that drives the greatest
power and other recommended attachments
may draw significantly less power or current.
SAVE THESE
INSTRUCTIONS
10 DO NOT operate any appliance with a
damaged cord or plug, or after the appliance
malfunctions, has been dropped or damaged
in any manner. This appliance has no
serviceable parts. Return the appliance to
EURO-PRO Operating LLC for examination,
repair or adjustment.
11 DO NOT let the power cord hang over the
edge of table or counter or touch hot surfaces
such as the stove.
12 Always use appliance on a dry, level surface.
13 Keep hands, hair, clothing, as well as utensils
out of container while processing to reduce
the risk of severe injury to persons or damage
to the appliance. A scraper may be used but
only when the appliance is not running.
14 Avoid contact with moving parts.
15 DO NOT attempt to sharpen blades.
16 DO NOT use the appliance if blade assembly
is bent or damaged.
17 To reduce risk of injury, never place the blade
assembly on base without pitcher or bowl
properly attached.
18 DO NOT operate this appliance on or near any
hot surfaces (such as gas or electric burner or
in a heated oven).
19 The use of attachments or accessories
including canning jars, not recommended by
the manufacturer may result in fire, electric
shock or personal injury.
20 DO NOT remove the container from the motor
base while the appliance is in operation.

31-877-646-5288
THIS BOOK COVERS MODEL NUMBERS:
BL680A 30
TECHNICAL SPECIFICATIONS
Voltage: 120V~, 60Hz.
Power: 1500 Watts
Pitcher Capacity: 72 ounces (9 cups, 2.1 L)
MAX Liquid Capacity: 64 ounces (8 cups, 1.8 L)
Bowl Capacity: 64 ounces (8 cups, 1.8 L)
Nutri Ninja®Cup Capacity: 24 ounces ( 3 cups, 710 mL)
32 ounces (4 cups, 950 mL)
Euro-Pro,Nutri-Ninja, Total Crushing and Ninja are registered
trademarks of Euro-Pro Operating LLC.
Sip & Seal,Pro Extractor Blades and Auto-iQ are trademarks of
Euro-Pro Operating LLC.

4
www.ninjakitchen.com
Contents
Thank you for
purchasing the
Nutri Ninja®
|
Ninja®Blender
System with
Auto-iQ™
Technology.
Getting to Know Your Nutri Ninja®
|
Ninja®Blender System with Auto-iQ™Technology ......5
Using the Nutri Ninja®
|
Ninja®Kitchen Blender System with Auto-iQ™Technology ...........7
Assembly and Use for the Ninja®Blender ......................................................................8
Assembly and Use for the Food Processor ...................................................................10
Assembly and Use for the Nutri Ninja®Cups ................................................................12
Speed Settings & Uses ...............................................................................................13
Care & Maintenance ..................................................................................................15
Troubleshooting Guide................................................................................................16
Replacement Parts.....................................................................................................16
Warranty & Registration..............................................................................................18

51-877-646-5288
Getting To Know Your Nutri Ninja®
|
Ninja®Blender System with Auto-iQ™Technology
c d e
a
k
m
b
f
j
l
fFood Processor Bowl
gFood Processor Lid
hDough Blade (food processor)
iChopping Blade (food processor)
aJumbo Multi-Serve 32 oz. Nutri
Ninja®Cup
bRegular 24 oz. Nutri Ninja®Cup (x2)
cPro Extractor Blades™
dSip & Seal™Lids (x3)
eSilicone Grip Sleeve (x3)
jBlender Pitcher
kBlender Lid
l Stacked Blades (blender)
mMotor Base
NOTE: Blades are not
interchangeable.
h
g
i

6
www.ninjakitchen.com
The Nutri Ninja®
|
Ninja®Blender System with Auto-iQ™Technology is a professional, high powered innovative tool with
a sleek design and outstanding performance, a true asset to any kitchen. The Nutri Ninja®
|
Ninja®Blender System with
Auto-iQ™Technology features intelligent programs that provides unique pulsing, blending and pausing patterns that do
the work for you! Get great results every time with no guesswork required! For best results, be sure to carefully read all
the instructions contained in the manual before using this appliance.
Nutri Ninja®
|
Ninja®Blender System with Auto-iQ™Technology Features:
• 5Auto-iQ™settings - Auto-iQ™Frozen Drinks/Smoothies, Auto-iQ™Food Puree, Nutri Ninja®Auto-iQ™Blend,
Nutri Ninja®Auto-iQ™Ultra Blend and Auto-iQ™Pulse
• PatentPendingNinja®Blade Technology
• BPAFreeBlenderPitcher(MAXLiquidCapacity:64oz.),NutriNinja®Cups, Food Processor Bowl and Lids
• TotalCrushing®Technology
• LEDControlPanelwithTimer
• Sturdy,Non-SlipBase
• SmartLidtechnologyforeasyrelease
• 3speeds:Low/Dough,Medium,&High
• NutriNinja®Nutrient & Vitamin Extraction
• Drip-FreePourSpout

71-877-646-5288
Using the Nutri Ninja®
|
Ninja®Blender System with Auto-iQ™Technology
CAUTION: Blade assemblies are sharp, not locked in
place and removable, handle with care. When handling
the blade assemblies, always hold them by the shaft.
BEFORE FIRST USE
1Remove all packaging material and labels from the
appliance.
2Wash the lids, blender pitcher, food processor bowl,
Nutri Ninja®cups and blades in warm, soapy water with
a soft cloth.
CAUTION: Handle the the blade assemblies with
care when washing, as the blades are very sharp.
3Rinse and dry thoroughly.
4The blender pitcher, food processor bowl, Nutri Ninja®
cups, lids and blades, are all dishwasher safe. It is
recommended that the lids and blades be placed on the
top rack. Ensure that the blades are removed from the
containers before placing in the dishwasher.
5Wipe the motor base clean with a damp cloth.
PLEASE KEEP THESE IMPORTANT
SAFEGUARDS IN MIND WHEN USING THE
APPLIANCE:
WARNING: Never leave the appliance
unattended while in use
CAUTION: DO NOT PROCESS HOT FOODS
OR HOT LIQUIDS.
CAUTION: Never remove the container
while the appliance is still running.
IMPORTANT: Never add ingredients
into the container before placing the
bladein first.
IMPORTANT: Blades are not
interchangeable.
IMPORTANT: DO NOT attempt to operate
the appliance without the lid on.
IMPORTANT: Never run the
applianceempty.
IMPORTANT: Appliance accessories
are not intended to be used in the
microwave as it may result in damage
to the accessories.
CAUTION: Blades
are not locked in
place. If using the
pour spout, ensure
the lid is fully
locked onto the
blender pitcher.
CAUTION: Blades
are not locked in
place. If pouring
with the lid
removed, ALWAYS
remove the blade
assembly first.

8
www.ninjakitchen.com
Assembly and Use for the Blender
1Holding the Stacked Blade Assembly by the top of the
shaft, place it onto the drive gear inside the pitcher.
Ensure that the attachment is seated properly and is
standing upright. (Fig. 1)
NOTE: The blade will fit loosely on the drive gear.
2Place the motor base on a clean, dry, level surface such as a
counter or table top. Press down on the motor base to make
sure that the suction cups adhere to the counter or table top.
3 Align and lower the Pitcher onto the motor base.
(Fig. 2) Handle should be aligned slightly to the right
of the “LOCK” symbol on the motor base.
4Rotate the pitcher clockwise until it locks in place, you
will hear a click when the lock is engaged. (Fig. 3)
5The pitcher can be placed on the motor base two ways;
the handle can be on the front right corner or the front
left corner. (Fig. 4a, Fig. 4b)
6Add the ingredients to the pitcher, making sure that
they do not exceed the highest measured marking line
on the side of the pitcher.
NOTE: If you need to add additional ingredients while
the appliance is processing, open the pour spout cap
and pour the ingredients in through the opening.
NOTE: When blending any kind of liquids, such as
mixtures of any drinks or smoothies, do not exceed the
“Max liquid” mark (64 ounces) on the pitcher
7Holding the lid by the handle in the upright position, place
it on top of the pitcher aligning the triangle ( ) located on
the lid with the triangle ( ) located on the pitcher’s handle.
(Fig. 5a) Press the handle down until you hear a click.
The triangles on the lid and the blender handle MUST be
aligned in order for the blender to turn on. (Fig. 5b)
8Plug the power cord into the electrical outlet and press
the power button ( ).
IMPORTANT: As a safety feature, the power light
( ) will flash and the motor will not work if the
pitcher and lid are not installed correctly. When
the pitcher and lid are installed properly, the
power light ( ) will be solid, indicating that the
appliance is ready for use.
ASSEMBLY
Fig. 2
HIGH PULSE
LOW DOUGH
SMOOTHIE
SINGLE
SERVE
PUREE FROZEN
BLENDING
MED
LOW /
DOUGH
Fig. 4a
HIGH PULSE
LOW DOUGH
SMOOTHIE
SINGLE
SERVE
PUREE FROZEN
BLENDING
MED
LOW /
DOUGH
Fig. 4b
Fig. 1
HIGH PULSE
LOW DOUGH
SMOOTHIE
SINGLE
SERVE
PUREE FROZEN
BLENDING
MED
LOW /
DOUGH
Fig. 3
Fig. 5a
Fig. 5b
WARNING: Never leave the appliance unattended while in use.
CAUTION: Use caution when handling the blade assemblies as the blades are very sharp.
IMPORTANT: Make sure that the motor base is plugged in for use.

91-877-646-5288
WARNING: Never leave the appliance unattended
while in use.
NOTE: Nutri Ninja®
|
Ninja®Blender System with Auto-
iQ™Technology can sense which jar is on the motor
base. The function lights will illuminate depending on
which jar is placed on the motor base. (Fig. 6)
9Press the power button to turn on the unit. Select
the speed or Auto-iQ™program that best suits your
needs. The Auto-iQ™program will stop the appliance
automatically at the end of the program. (Fig. 7)
NOTE: Pulse ingredients for even chopping by
holding the Auto-iQ™Pulse button until your desired
consistency is reached.
10 To pause the appliance, press the selected speed or
Auto-iQ™Program a second time. (Fig. 8)
11 When you have reached your desired consistency, stop
the appliance by pressing the power button ( ) and
wait for the blade to stop turning. (Fig. 8)
12 Turn the pitcher counter clockwise to remove and then
lift off the base. (Fig. 9)
CAUTION: Never insert your hands in the pitcher as the
blades are sharp. Always use a spatula to dislodge
food that has stuck to the sides of the pitcher.
13 Depending on the consistency of the contents in the
container, open the pour spout cap and use the spout
to empty liquid contents.
CAUTION: Blades are not locked in place. If using
the pour spout, ensure the lid is fully locked onto
the blender pitcher.
14 For thicker consistencies, remove the lid and blade
attachment carefully (by its shaft), then empty contents
from the container. To remove the lid, press the release
button on the lid and pull the lid handle up to a 90°
angle ands lift the lid off the blender pitcher. (Fig. 10)
CAUTION: Blades are not locked in place. If
pouring with the lid removed, ALWAYS remove the
blade assembly first.
15 Make sure that the unit is unplugged when not in use.
16 To release the motor base from the counter or table
top, place your hands underneath both sides of the
motor base and gently pull the unit up and towards you.
(Fig. 11)
Assembly and Use for the Blender - cont.
Fig. 8
USE REMOVAL
Fig. 6
Fig. 9
Fig. 7
Fig. 10
Fig. 11

10
www.ninjakitchen.com
Assembly and Use for the Processor Bowl
NOTE: Nutri Ninja®|Ninja®Blender System with Auto-
iQ™Technology can sense which jar is on the motor
base. The function lights will illuminate depending on
which jar is placed on the motor base. (Fig. 1)
1 Holding the desired blade by the top of the shaft, place
it onto the drive gear inside the bowl. Ensure that the
attachment is seated properly and is standing upright.
(Fig. 2)
NOTE: The blade will fit loosely on the drive gear.
CAUTION: Blades are not locked in place
2Place the motor base on a clean, dry, level surface such as a
counter or table top. Press down on the motor base to make
sure that the suction cups adhere to the counter or table top.
3 Align and lower the Processor Bowl onto the motor
base. (Fig. 3) Handle should be aligned slightly to the
right of the “LOCK” symbol on the motor base.
4Rotate the bowl clockwise until it locks in place, you will
hear a click when the lock is engaged. (Fig. 4)
5The bowl can be placed on the motor base two ways;
the handle can be on the front right corner or the front
left corner. (Fig. 5a, Fig. 5b)
6Add the ingredients to the bowl, making sure that they
do not exceed the highest measured marking line on
the side of the bowl.
7Holding the lid by the handle in the upright position,
place it on top of the Processor Bowl aligning the
triangle ( ) located on the lid with the triangle ( )
located on the Processor Bowl handle. (Fig. 6a) Press
the handle down until you hear a click. The triangles on
the lid and the Processor Bowl handle MUST be aligned
in order for the blender to turn on. (Fig. 6b)
NOTE: The 64 oz. bowl is not intended for blending
drinks. Do not overfill.
NOTE: To add liquids during blending, open the drizzle
hole on the top of the lid and pour the liquid slowly into
the mixture.
8 Plug the power cord into the electrical outlet and press
the power button ( ).
IMPORTANT: As a safety feature, the power
button ( ) will flash and the motor will not work
if the bowl and lid are not installed correctly.
When the bowl and lid are installed properly, the
power button ( ) will be solid, indicating that the
appliance is ready for use.
ASSEMBLY
MED
LOW /
DOUGH
Fig. 5a Fig. 5b
MED
LOW /
DOUGH
Fig. 2
MED
LOW /
DOUGH
Fig. 3Fig. 1
MED
LOW /
DOUGH
Fig. 4
Fig. 6a
Fig. 6b
WARNING: Never leave the appliance unattended while in use.
CAUTION: Use caution when handling the blade assemblies as the blades are very sharp.
IMPORTANT: Make sure that the motor base is plugged in for use.

11 1-877-646-5288
Assembly and Use for the Processor Bowl - cont.
WARNING: Never leave the appliance unattended while in use.
CAUTION: Use caution when handling the blade assemblies as the blades are very sharp.
USING THE CHOPPING BLADE ASSEMBLY
1Holding the Chopping Blade assembly by the shaft,
place it onto the gear shaft inside the bowl. Ensure that
the attachment fits around the gear shaft and that it is
standing straight.
2 Add the ingredients and secure the bowl lid onto the
bowl. (Fig. 1)
3Plug the power cord into the electrical outlet and press
on the power button ( ). Select the speed or Auto-iQ™
program that best suits your needs. Pulse ingredients
for even chopping by holding the Auto-iQ™Pulse
button until your desired consistency is reached.
NOTE: Please refer to “Speed Settings & Uses” chart
for suggested uses and speeds.
4When you have reached your desired consistency, stop
the appliance by pressing the power button ( ) and
wait for the blade to stop turning. (Fig. 2)
5To remove the lid, press the release button on the lid
and pull the lid handle up to a 90°angle. (Fig. 2)
6Turn the bowl counter-clockwise and lift it to remove it
from the motor base. (Fig. 3)
CAUTION: If pouring from the bowl, ALWAYS
remove the blade assembly first before pouring.
7To release the motor base from the counter or table top,
place your hands underneath both sides of the motor
base and gently pull the unit up and towards you.
(Fig. 4)
USING THE DOUGH BLADE
1Holding the dough blade by the shaft, place it onto the
gear shaft inside the bowl. Ensure that the attachment
fits around the gear shaft and that it is standing straight.
(Fig. 5)
2Add the ingredients and secure the bowl lid onto the bowl.
3Plug the power cord into the electrical outlet and press
on the power button ( ). Select LOW/DOUGH on the
control panel and process until ingredients come
together to form a mass.
NOTE: Please refer to “Speed Settings & Uses” chart
for suggested uses and speeds.
4Once finished making dough, stop the appliance by
pressing the power button ( ) and wait for the blade to
stop turning.
5To remove the lid, press the release button on the lid
and pull the lid handle up to a 90°angle. (Fig. 2)
6Turn the bowl counter-clockwise and lift it to remove it
from the motor base. (Fig. 3)
7To release the motor base from the counter or table top,
place your hands underneath both sides of the motor
base and gently pull the unit up and towards you.
(Fig. 4)
REMOVAL
Fig. 2 Fig. 3 Fig. 4
USE
Fig. 5
USE
Fig. 1

12
www.ninjakitchen.com
6. To pause the appliance, press the selected speed or
Auto-iQ™Program a second time.
7Once you have reached your desired consistency, turn
the power button off. Turn the Nutri Ninja®cup counter-
clockwise and pull straight up to remove. (Fig. 5, Fig. 6)
NOTE: Do not overfill! To avoid spilling, do not add
ingredients past the “Max” liquid line.
8Turn the cup upright and remove the Pro Extractor
Blades™by twisting the blade assembly counter
clockwise.
9Place the Sip & Seal™lid onto the Nutri Ninja®cup,
twist to seal and enjoy!
10 Make sure that the motor base is unplugged when
not in use.
11 To release the motor base
from the counter or table top,
place your hands underneath
both sides of the motor base
and gently pull the unit up and
towards you. (Fig. 7)
NOTE: Nutri Ninja®
|
Ninja®Blender System with Auto-iQ™
Technology can sense which jar is on the motor base. The
function lights will illuminate depending on which jar is
placed on the motor base. (Fig. 1)
1Place the motor base on a clean, dry, level surface such as a
counter or table top. Press down on the motor base to make
sure that the suction cups adhere to the counter or table top.
2Add ingredients to the Nutri Ninja®cup.
3Place the Pro Extractor Blades™onto the cup and tightly
screw it on clockwise until you have a good seal. (Fig. 2)
4Turn the Nutri Ninja®cup upside down and place it
onto the motor base, aligning the tabs on the cup with
the motor base. Rotate the Nutri Ninja®cup clockwise
until it locks in place, you will hear a click when the
lock is engaged. (Fig. 3)
5Press the power button on, and select the speed or
Auto-iQ™program that suits your needs.
The Auto-iQ™program will stop the appliance
automatically at the end of the program. (Fig. 4)
Assembly and Use for the Nutri Ninja® Cups
Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6
Fig. 7
Fig. 1
ASSEMBLY USE REMOVAL
WARNING: Never leave the appliance unattended while in use.
CAUTION: Use caution when handling the blade assemblies as the blades are very sharp.
IMPORTANT: Make sure that the motor base is plugged in for use.

13 1-877-646-5288
Programs, Speed Settings & Uses for the Blender Pitcher
Programs, Speed Settings & Uses for the Food Processor Bowl
FUNCTION CONTAINER BLADE
TYPE
SPEED or
PROGRAM TYPE OF FOOD
Frozen Drinks /
Ice Crush Blender Pitcher Stacked Blade Auto-iQ™Frozen Drinks/ Smoothies
Ice
Frozen Drinks
Smoothies
Milkshakes
Pureeing Blender Pitcher Stacked Blade Auto-iQ™Food Puree Soups
FUNCTION CONTAINER BLADE
TYPE
SPEED or
PROGRAM TYPE OF FOOD
Mincing Food Processor
Bowl
Chopping
Blade Auto-iQ™Pulse
Onion
Garlic
Herbs
Kneading and
Dough Mixing
Food Processor
Bowl Dough Blade Low/Dough
Bread Dough
Pie Dough
Pizza Dough
Pretzel Dough
Cookie Dough
Processing Food Processor
Bowl
Chopping
Blade
Auto-iQ™Food Puree
Low/Dough
Medium
High
Pâtés
Stewed Fruits
Dips
Apple Sauce
Spreads
Emulsifying Food Processor
Bowl
Chopping
Blade
Low/Dough
Medium
Salad Dressings
Sauces
Grinding Food Processor
Bowl
Chopping
Blade Medium Meat
Grating Food Processor
Bowl
Chopping
Blade
Auto-iQ™Pulse
High
Grated Cheese
Bread Crumbs
Chopping Food Processor
Bowl
Chopping
Blade Auto-iQ™Pulse
Salsa
Vegetables
Nuts
Batters Food Processor
Bowl Dough Blade Low/Dough Cake Mixes Batters

14
www.ninjakitchen.com
Programs, Speed Settings & Uses for the Nutri Ninja®Cup
FUNCTION CONTAINER BLADE
TYPE
SPEED or
PROGRAM TYPE OF FOOD
Smoothies Nutri Ninja®Cup Pro Extractor
Blades™
Nutri Ninja®Auto-iQ™
Blend
Smoothies
Protein Drinks
Green Smoothies Nutri Ninja®Cup Pro Extractor
Blades™
Nutri Ninja®Auto-iQ™
Ultra Blend
Frozen Fruits
Frozen Vegetables
Kale
Celery
Spinach
Seeds
Ice
Grating Nutri Ninja®Cup Pro Extractor
Blades™
Auto-iQ™Pulse
High
Grated Cheese
Bread Crumbs
Chopping Nutri Ninja®Cup Pro Extractor
Blades™
Auto-iQ™Pulse
High
Salsa
Vegetables

15 1-877-646-5288
HOW TO CLEAN
CAUTION: Make sure that the motor base is
unplugged from the power source before inserting
or removing any attachment and before cleaning.
CAUTION: DO NOT immerse the motor base into
water or any other liquid.
CAUTION: Use caution when handling the blade
assemblies as the blades are very sharp.
1Separate/remove all parts from each other.
2 Clean the motor base with a damp cloth and wipe dry.
3Place the blender pitcher, Nutri Ninja®cup and food
processor bowl in the dishwasher. Place the lids and
attachments on the top rack.
OR
4 Carefully hand wash the lids, blender pitcher, food
processor bowl, Nutri Ninja®cups and blade assemblies in
warm, soapy water with a soft cloth.
Please call customer service if any servicing needs to be
performed on the appliance at 1-877-646-5288.
Care & Maintenance
HOW TO STORE
1 Store the Nutri Ninja®
|
Ninja®Blender System with
Auto-iQ™Technology
upright with the pitcher on the
motor base, 6-Blade assembly inside the pitcher and lid on
the pitcher. Do not place anything on top. Store the bowl
with the 4-Blade assembly inside and the lid on top. S tore
the Nutri Ninja®cup and the rest of the attachments
along side the appliance or in a cabinet where they will
not be damaged and won’t cause a hazard.
RESETTING THE MOTOR THERMOSTAT
The Nutri Ninja®
|
Ninja®Blender System with
Auto-iQ™Technology
features a unique safety system
which prevents damage to the unit’s motor and
drive system should you inadvertently overload your
appliance. If the appliance is being overloaded,
the motor will stop. Allow the appliance to
cool for approximately 15 minutes. To reset the
appliance, follow the resetting procedure below:
1 Unplug the appliance from the electrical outlet.
2 Remove and empty the container and ensure that no
food is jamming the cutting blades or attachments.
3 Allow the appliance to cool for approximately 15
minutes.
4 Re-install the container onto the base and re-plug the
appliance into the electrical outlet.
5 Proceed to use the appliance as before making sure not
to exceed the recommended maximum capacities.

16
www.ninjakitchen.com
PROBLEMS POSSIBLE REASONS & SOLUTIONS
Motor Doesn’t Start or
Attachment Doesn’t Rotate.
Make sure the container is securely locked on the motor base.
Make sure the lid is securely on the container in the correct position (align
arrows).
The appliance is turned “Off”. Press the power button ( ) to turn “On”.
Check that the plug is securely inserted into the electrical outlet.
Check the fuse or circuit breaker.
The unit has overloaded. The appliance will stop and the power light will
flash. Unplug and wait approximately 15 minutes before using again.
The unit has overheated. Unplug and wait approximately 15 minutes before
using again.
Check to make sure the unit is not overloaded.
Food is Unevenly Chopped.
Either you are chopping too much food at one time, or the pieces are not of
even size and processing smaller amounts per batch.
Food is Chopped Too Fine or is
Too Watery.
The food has been over processed. Use Auto-iQ™Pulse button for
controlled processing.
Food Collects On Lid or On the
Sides of the Container.
The mixture is too thick. Add more liquid.
You Cannot Achieve Snow
From Solid Ice.
Do not use ice that has been sitting out or has started to melt. Use ice
straight from the freezer.
Start with a few pulses and then go to a continuous blending cycle.
Motor Base Won’t Stick to
Counter or Table Top.
Make sure surface and suction feet are wiped clean. Suction feet will only
stick to smooth surfaces. Suction feet WILL NOT stick on some surfaces
such as, wood, tile and non-polished finishes.
DO NOT attempt to use appliance when the motor base is stuck to a
surface that is not secure, (cutting board, platter, plates, etc.).
You get an “Err” Message
Your Ninja®is able to detect which jar is on the base. You may be trying
to use a program that is not designed for the jar you have installed. The
programs will light up indicating which programs are available for each jar.
You have a blinking red light
The unit is not installed properly. For your safety the unit will only be able to
be turned on when it is properly assembled. Please refer to the assembly
pages of this inspiration guide for assistance.
Troubleshooting Guide
Replacement Parts
ORDERING REPLACEMENT PARTS
To order additional parts and attachments, please visit our website: www.ninjakitchen.com
or feel free to contact customer service: 1-877-646-5288.

17 1-877-646-5288
Notes

18
www.ninjakitchen.com
Product Registration
Please visit www.ninjakitchen.com or call 1-877-646-5288 to register your new Ninja®product within ten (10) days of
purchase. You will be asked to provide the store name, date of purchase and model number along with your name and address.
The registration will enable us to contact you in the unlikely event of a product safety notification. By registering you
acknowledge to have read and understood the instructions for use, and warnings set forth in the accompanying instructions.
ONE (1) YEAR LIMITED WARRANTY
EURO-PRO Operating LLC warrants this product to be free from material defects and workmanship for a period of one (1)
year from the date of purchase when utilized for normal household use, subject to the following conditions, exclusions and
exceptions.
The liability of EURO-PRO Operating LLC is limited solely to the cost of the repair or replacement of the unit at our option.
This Limited Warranty does not cover normal wear of parts and does not apply to any unit that has been tampered with or
used for commercial purposes. This Limited Warranty does not cover damage caused by misuse, abuse, negligent handling or
damage due to faulty packaging or mishandling in transit. This Limited Warranty does not cover damage or defects caused by
or resulting from damages from shipping or repairs, service or alteration to the product or any of its parts, which have been
performed by a repair person not authorized by EURO-PRO Operating LLC.
If your appliance fails to operate properly while in use under normal household conditions within the warranty period, return
the complete appliance and accessories, freight prepaid. For assistance with warranty service options or customer support,
please call our customer care and product specialists at , call 1-877-646-5288 or visit our website www.ninjakitchen.com.
If the appliance is found to be defective in material or workmanship, EURO-PRO Operating LLC will repair or replace it free of
charge. Proof of purchase is required and a fee of $19.95 will apply to cover the cost of return freight. *
This Limited Warranty is extended to the original purchaser of the unit and excludes all other legal, implied and/or conventional
warranties. The responsibility of EURO-PRO Operating LLC if any, is limited to the specific obligations expressly assumed
by it under the terms of this Limited Warranty. In no event is EURO-PRO Operating LLC liable for incidental or consequential
damages to anyone of any nature whatsoever. Some states do not permit the exclusion or limitation of incidental or
consequential damages, so the above may not apply to you.
This Limited Warranty gives you specific legal rights, and you may also have other rights which vary from state to state or from
province to province.
*IMPORTANT: Carefully pack item to avoid damage in shipping. Be sure to include proof of purchase date and
to attach tag to item before packing with your name, complete address and phone number with a note giving
purchase information, model number and what you believe is the problem with the item. We recommend you
insure the package (as damage in shipping is not covered by your Limited Warranty). Mark the outside of your
package “ATTENTION CUSTOMER SERVICE”.

Euro-Pro Operating LLC
US: Newton, MA 02459
CAN: Ville St-Laurent, QC H4S 1A7
1-877-646-5288
www.ninjakitchen.com
Copyright © Euro-Pro Operating LLC 2015
Euro-Pro,Nutri-Ninja, Total Crushing and Ninja are registered
trademarks of Euro-Pro Operating LLC.
Sip & Seal,Pro Extractor Blades and Auto-iQ are trademarks of
Euro-Pro Operating LLC.
Illustrations may differ from actual product. We are constantly striving to
improve our products, therefore the specifications contained herein are subject
to change without notice.
Printed in China
BL680A_30_IB_E_2C_150323_1