Ninja FOODI HB150SM Series User manual

FOODI™ COLD
AND HOT
BLENDER
HB150SM
Series
OWNER’S GUIDE
SG ninjakitchen.sg
MY ninjakitchen.my

2 3SG ninjakitchen.sg | MY ninjakitchen.mySG [phone] | MY [phone]
CONTENTS
THANK YOU
for purchasing the Ninja™ Foodi™ Cold and Hot Blender
Important Safety Instructions� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 4
Parts � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �6
Features� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �7
Auto-iQ Programs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Manual Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Before First Use � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �8
Handling the Blender Pitcher � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �9
Getting Started With Your Blender � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �10
Assembling the Heated Blender . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Auto-iQ Programs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Manual Blend . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Manual Cook. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Care & Maintenance� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 12
Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Storing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Resetting the Motor Thermostat. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Ordering Replacement Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Display Screen & Error Messages � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 13
Troubleshooting Guide� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �14
Warranty � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 15
PLEASE READ CAREFULLY AND
KEEP FOR FUTURE REFERENCE�
These instructions are designed to help
youget a complete understanding of
your new Ninja Foodi Blender.
If you have any questions, please call our
Customer Service line at SG [phone]
MY [phone].
TECHNICAL SPECIFICATIONS
Voltage: 220-240V~, 50-60Hz
Watts: 1000W
RECORD THIS INFORMATION
Model Number: ____________________
Serial Number: _____________________
Date of Purchase: ___________________
(Keep receipt)
Store of Purchase: __________________
REGISTER YOUR PURCHASE
SG ninjakitchen.sg
MY ninjakitchen.my

4 5SG ninjakitchen.sg | MY ninjakitchen.mySG [phone] | MY [phone]
1Read all instructions prior to using the
appliance and its accessories.
2Carefully observe and practice all warnings
and instructions. This unit contains
electrical connections, moving parts, and
heating elements that potentially present
risk to the user.
3Take your time and exercise care during
unpacking and appliance setup.
4Take inventory of all contents to ensure
you have all parts needed to properly
and safely operate your appliance.
5Blades are sharp. Handle carefully.
6Turn the appliance OFF, then unplug the
appliance from the outlet when not in
use, before assembling or disassembling
parts, and before cleaning. To unplug,
grasp the plug by the body and pull
from the outlet. NEVER unplug by
grasping and pulling the flexible cord.
7Wash all parts that may contact food
before use. Follow washing instructions
covered in this instruction manual.
8T
o protect against the risk of electric shock,
DO NOT submerge the appliance or allow
the power cord to contact any form of liquid.
9DO NOT use this appliance outdoors. It is
designed for indoor household use only.
10 DO NOT operate any appliance with a
damaged cord or plug, or after the
appliance malfunctions or is dropped
or damaged in any manner. This appliance
has no user-serviceable parts. If damaged,
contact SharkNinja for servicing.
11 This appliance has important markings on
the plug blade. The entire supply cord is
not suitable for replacement. If damaged,
please contact SharkNinja for service.
12 Extension cords should not be used with
this appliance.
13 DO NOT allow children to operate this
appliance or use as a toy. Close
supervision is necessary when any
appliance is used near children.
14 This appliance is not intended to be used
by people with reduced physical, sensory,
or mental capabilities, or lack of
experience and knowledge, unless they
have been given supervision or instruction
concerning use of the appliance by a
person responsible for their safety.
15 Cleaning anda user maintenance shall not
be carried out by children.
16 Keep the appliance and its cord out of
reach of children.
17 Before each use, inspect blade assemblies
for damage. If a blade is bent or damage is
suspected, contact SharkNinja to arrange
for replacement.
18 DO NOT attempt to sharpen blades.
19 DO NOT let cord hang over edge of table
or counter or touch hot surfaces.
20 DO NOT allow the unit or the cord to
contact hot surfaces, including stoves
and other heating appliances.
21 DO NOT place on or near a hot gas or
electric burner or in a heated oven.
22 ALWAYS use the appliance on a dry and
level surface.
23 Keep hands, hair, and clothing out of the
container when loading and operating.
24 ONLY use attachments and accessories
that are provided with the product or are
recommended by SharkNinja. The use of
attachments, including canning jars, not
recommended or sold by SharkNinja may
cause fire, electric shock, or injury.
25 During operation and handling of the
appliance, avoid contact with moving parts.
26 DO NOT operate the appliance with an
empty container.
27 DO NOT fill containers past the max fill
or max liquid lines.
28 DO NOT microwave any containers or
accessories provided with the appliance.
29 Before operation, ensure all utensils are
removed from containers. Failure to
remove utensils can cause containers to
shatter and potentially result in personal
injury and property damage.
30 Keep hands and utensils out of container
while blending to reduce the risk of severe
injury to persons or damage to the blender.
A rubber scraper or spatula may be used
but must be used ONLY when the blender
is not running.
31 NEVER operate the appliance without lids
and caps in place. DO NOT attempt to
defeat the interlock mechanism. Ensure
the container and lid are properly
installed before operation.
32 DO NOT expose the containers and
accessories to extreme temperature
changes. They may experience damage.
33 Be careful if hot liquid is poured into the
food processor or blender as it can be
ejected out of the appliance due to a
sudden steaming.
34 NEVER leave the appliance unattended
while in use.
35
ALWAYS operate blender with cover in place.
36 Allow to cool before assembling or
disassembling parts and before
cleaning appliance.
37
DO NOT grasp the sides of the pitcher after
hot blending or cooking. The surface of the
pitcher is hot during and after operation.
Surfaces are hot during and after operation.
To prevent burns or personal injury, ALWAYS
use protective hot pads or insulated oven
mitts and use available handles and knobs.
38 If you find unmixed ingredients sticking to
the sides of the pitcher, stop the appliance,
remove the lid, and use a rubber scraper or
spatula to dislodge ingredients. NEVER
insert your hands into the pitcher, as you
may contact one of the blades and
experience a laceration.
39
DO NOT attempt to remove the container
and lid from the motor base while the motor
is still spinning. Allow the appliance to come
to a complete stop before removing the lid
and pitcher.
40 If the appliance overheats, a thermal switch
will activate and temporarily disable the
motor. To reset, unplug the appliance and
allow it to cool for approximately 5 minutes
before using again.
41 The maximum wattage rating for this
appliance is based on the configuration of
the high-speed bottom blade and glass
pitcher blender. Other configurations may
draw less power or current.
42 Turn o the appliance and unplug the
motor base before cleaning.
IMPORTANT SAFETY INSTRUCTIONS
PLEASE READ CAREFULLY BEFORE USE • FOR HOUSEHOLD USE ONLY
SAVE THESE INSTRUCTIONS
WARNING
To reduce the risk of injury, fire, electrical shock or property damage,
basic safety precautions must always be followed, including the following
numbered warnings and subsequent instructions� Do not use appliance for
other than intended use�
Read and review instructions for operation and use�
Indicates the presence of a hazard that can cause personal injury, death or
substantial property damage if the warning included with this symbol is ignored�
For indoor and household use only�
When using electrical appliances, basic safety precautions should always be followed,
including the following:

SG ninjakitchen.sg | MY ninjakitchen.mySG [phone] | MY [phone]
PARTS FEATURES
AUTO-IQ PROGRAMS:
Intelligent programs that combine unique
pulsing, blending, pausing, and heating
patterns that do the work for you.
Smoothie (0:45)
Combine your favourite fresh or frozen
ingredients, liquids, and powders to create
smoothies and protein shakes.
Extract (1:05)
Ideal for tough, leafy, or fibrous whole fruits
and vegetables, including their skins, seeds,
and stems.
Frozen Drink (0:55)
Crush ice and frozen fruit into
restaurant-style frozen drinks.
Ice Cream (1:10)
Use your favourite frozen fruit and dairy
to make sorbets and frozen treats.
Sauté (5:21)
Unlock more flavor by quickly cooking onions,
garlic, spices, and more before creating
homemade soups, sauces and dips.
Sauce/Dip (30:30)
Create sweet or savoury sauces and
fondue.
Hearty Soup (30:00)
Create homemade soup with more texture.
Smooth Soup (30:00)
Cook and blend your favourite
silky-smooth soups.
Mixer (10:30)
Use sweet or savoury ingredients to create
bold-flavored concentrates.
Water (10:30)
Create fruit water or wellness tonics and teas.
Cocktail (10:30)
Quickly infuse liquor or create craft cocktails.
B
C
A
E
A Pitcher Lid with Removable Centre Cap
B 1.8 L.* Glass Pitcher with Built-in Heating Element
*1.6 L max cold liquid and 1.4L max hot liquid capacity
C Motor Base
(attached power cord not shown)
D Tmper
E Clening Brush
D
MANUAL SETTINGS:
Blend
Select BLEND, then choose either
LOW, MED or HIGH blending speed.
The setting will run for 60 seconds or
until manually stopped.
Cook
Select COOK, then choose either LOW, MED
or HIGH temperature. The setting will run for
60 minutes or until manually stopped
Pulse
Select either BLEND or COOK, then press
PULSE to process ingredients to your
desired texture and consistency.
OTHER FEATURES:
Power Button
Use to turn the unit on or o.
Clean (6:36)
Combines heat and rapid pulses to remove
stuck-on messes.
Heat On
Light will turn on when you have selected
a program or function that uses heat.
Keep Warm
Light will turn on after cooking, and the
unit will keep contents warm for up to
60 minutes.

8 9SG ninjakitchen.sg | MY ninjakitchen.mySG [phone] | MY [phone]
BEFORE FIRST USE
1Remove all packaging material and labels
from the appliance. Separate all parts from
each other.
2Wash the pitcher, lid, and accessories with
warm, soapy water. Use a dishwashing
utensil with a handle to avoid contact
with the blades.
3Thoroughly rinse and air-dry all parts.
IMPORTANT: Review all warnings on
pages 4–5 before proceeding.
HANDLING THE BLENDER PITCHER
LIFTING AND POURING
FROM THE PITCHER
Firmly grasp the handle with one hand
and carefully pour out ingredients.
NOTE: If pitcher feels too heavy in one
hand, use a protective mitt or glove and
support the pitcher weight with your
other hand.
NOTE: DO NOT submerge the pitcher
when washing.
NOTE: Follow cleaning instructions on
page 12 very carefully.
DO NOT grasp pitcher after hot blending or cooking. Surfaces are hot during and after
operation. To prevent burns or personal injury, A LWAYS use protective hot pads or insulated
oven mitts and use available handles and knobs.

10 11SG ninjakitchen.sg | MY ninjakitchen.mySG [phone] | MY [phone]
GETTING STARTED WITH YOUR BLENDER
ASSEMBLING THE HEATED BLENDER
1Plug in motor base and place on a clean, dry,
level surface such as a countertop or table.
2Lower the pitcher onto the motor base.
6To remove the lid from the pitcher, rotate
lid counterclockwise out of the lock
position and lift up.
3Add ingredients, making sure to not exceed
the max fill lines on side of pitcher. In COOK
or INFUSE modes, DO NOT exceed the level
labelled “SOUP.” In BLEND mode, DO NOT
exceed the level labelled “COLD.”
MANUAL SETTINGS
MANUAL BLEND
Manual Blend speeds give you ultimate
control over your blend.
1To begin, press the Power button.
2Choose BLEND to unlock speed options.
3Select LOW, MED, HIGH or PULSE to
begin blending.
MANUAL COOK
Manual Cook settings puts the control in
your hands.
1 To begin, press the Power button.
2 Choose COOK to unlock temperature options.
3Select LOW, MED or HIGH to begin cooking.
4Timer will count up to 60 seconds or until
manually stopped.
NOTE: You can press PULSE during Manual
Cook mode to gently stir ingredients.
NOTE: The unit will beep 3 times to alert
you the program is going to stir ingredients.
Make sure centre cap is secure during use.
NOTE: After heated programs, steam may
release as the lid is removed. Keep hands
on the outer tabs and lift directly up.
NOTE: For best results, quickly PULSE
ingredients periodically during cooking to
distribute heat and promote even cooking.
NOTE: The Pulse setting will run only
when the PULSE button is pressed.
AUTO-IQ PROGRAMS
1To begin, press the Power button.
2 Press the program of your choice from
the CRUSH, COOK or INFUSE sections.
3The Heat On light will turn on if the
selected program uses heat.
TIP: When making thicker recipes such
as ice creams and dips, use the tamper
to push ingredients toward the blades.
Tamper should be used only when lid is
attached to pitcher. Remove centre cap
and replace with tamper.
Cold line
(1.6 L)
Soup line
(1.4 L)
4To install the lid on the pitcher, place the
lid tab to the right of the handle. Press the
lid down until it is secure. Rotate the tab
clockwise so the arrow on the lid tab aligns
with the arrow on the pitcher handle.
5Secure the centre cap by placing it down
into the lid and twisting clockwise until
it clicks into place.
IMPORTANT: Review all warnings on
pages 4–5 before proceeding.

12 SG ninjakitchen.sg | MY ninjakitchen.mySG [phone] | MY [phone] 1312 13
CARE & MAINTENANCE
CLEANING
Allow parts to cool before cleaning.
Separate all parts before cleaning.
Hand-Washing
Wash the pitcher, lid and tamper with
warm, soapy water. Use the included
cleaning brush to avoid direct contact
with the blades.
Dishwasher
The lid, centre cap, and tamper are
dishwasher safe.
Motor Base
Press the power button to turn o the
unit, then unplug the motor base. Wipe
motor base with a clean, damp cloth.
CLEAN
A combination of heat and rapid pulses
easily removes residue from the nonstick
coating in minutes.
1
Fill pitcher with 700 ml of water and
2 small drops of dish soap.
2Place the lid on the pitcher and ensure it
is properly closed.
3Press CLEAN.
4When program is complete, discard
water and thoroughly rinse pitcher.
TIPS FOR BEST CLEANING RESULTS:
• Give the pitcher a quick rinse before
running CLEAN.
• Run CLEAN immediately after use.
STORING
Store the unit upright with the lid secured
on the pitcher.
RESETTING THE MOTOR
This unit features a unique safety system
that prevents damage to the motor by
temporarily disabling the motor if it begins
to overheat. Should this occur, follow the
reset procedure below.
1 Unplug the unit from the electricaloutlet.
2 Allow the unit to cool for approximately 15
minutes before using.
IMPORTANT: Ensure that maximum
capacities are not exceeded. This is the
most typical cause of appliance overload.
ORDERING REPLACEMENT PARTS
To order additional parts and attachments,
visit ninjakitchen.sg or ninjakitchen.my
DISPLAY SCREEN & ERROR MESSAGES
NOTE: DO NOT stack items on top of the
unit. Store any remaining attachments
alongside the unit or in a cabinet where they
will not be damaged or create a hazard.
NOTE: DO NOT attempt to remove the
pitcher while the blender is running. Wait
for the blades to stop spinning before
removing the pitcher.
NOTE: DO NOT submerge the blender
pitcher. Submerging will damage the
integrated heating element.
NOTE: DO NOT wash the blender pitcher
in the dishwasher. Dishwashing will
damage the integrated heating element.
DISPLAY SCREEN MESSAGES
“Lid”
The lid is not assembled correctly. Be sure
the lid is on the pitcher and locked in place
before running a program.
“Jar”
The pitcher is not properly attached to
the base. Be sure the pitcher is secured
in the base before selecting a program.
“---” Blinking
You are attempting to run a program
too many times in a row. For your safety,
certain programs may be run only two
consecutive times.
ERROR MESSAGES
“E01” or “E02”
Remove and reinstall the pitcher. If that
does not solve the issue, contact
Customer Service at SG [phone]
or MY [phone]. So we may better
assist you, please register your product online
at www.ninjakitchen.sg or ninjakitchen.my
and have the product on hand when you call.
IMPORTANT: Review all warnings on
pages 4–5 before proceeding.

14 15
SG [phone] | MY [phone] SG ninjakitchen.sg | MY ninjakitchen.my
TROUBLESHOOTING GUIDE
Unit doesn’t turn on�
• Make sure unit is plugged in.
• Display will light up with usable programs once connected to power. Pitcher and lid must
be engaged to select a program.
Lid is stuck on pitcher�
• The lid is removed by rotating from the handle counterclockwise and then lifting up.
Cannot change time or temperature settings on Auto-IQ programs�
• All programs were developed by culinary experts to deliver the perfect balance of
heating, stirring, and blending patterns to give perfect results, so you do not have to
set the time or temperature.
• To select a specific temperature, use the Manual COOK setting instead of an
Auto-iQ program.
Program has paused�
• If the lid was removed while running a program or while in a Manual mode, the cooking
or blending function will pause. Replace the lid and push the program button again
to continue from where the time left o.
Why does the blender sometimes count up and other times count down?
• Auto-iQ programs are timed to finish on their own when they are complete, so the clock
counts down until the program has finished. When using Manual modes, the clock will
count up from 0 until the auto shuto time is reached or the button for the currently
running mode is selected again.
My pitcher will not assemble to the base
• Make sure the Ninja logo is facing forward before placing the pitcher directly onto
the blender base. If the pitcher is still not fully seated, rotate the coupling under the
pitcher to help align it to the base.
Pitcher still has residue after running the Clean program�
• Try running the CLEAN program a second time. You may also hand-wash the pitcher
using the included cleaning brush, which is specifically designed to clean those
hard-to-reach areas.
The control panel returns to home display�
• The control panel is designed to return to standby mode when left inactive for
3 minutes. If you have taken longer than 3 minutes to choose a function, or if the
program has finished, the unit will return to standby mode.
Why does the unit beep during Auto-iQ Programs?
• We’ve incorporated STIR ALERT within all Auto-iQ programs to let you know the unit
is about to stir. The alert is 3 beeps followed by a 2-second pause before each stir.
WARNING: To reduce the risk of shock and unintended operation,
turn power o and unplug unit before troubleshooting� The warranty commences on the date of purchase and expires at the end of the 1 year period. In
the unlikely event of a defect due to faulty materials or workmanship within the guarantee period
we will replace the defective/faulty part with a new product, free of charge, or if the unit is deemed
defective/faulty we replace the unit with an equivalent or upgraded model, at our discretion.
For warranty claims, you will need to submit a proof of purchase in the form of a valid receipt
that displays date and place of purchase.
Replacement items will be covered by the limited warranty for the balance of the warranty
period from the date of the original purchase. Please note:
Your warranty is subject to the following conditions:
• DO NOT operate the appliance with a damaged plug or cord, or if the unit has been
dropped, damaged or dropped in water.
• To avoid the risk of electric shock, do not disassemble or attempt to repair the appliance
on your own. If the supply cord is damaged, it must be replaced by a qualified electrician to
avoid a hazard. Incorrect re-assembly or repair can cause a risk of electric shock or injury to
persons when the appliance is used.
• The item has not been misused, abused, neglected, altered, modified or repaired by anyone.
• The item has been subjected to fair wear and tear.
• The item has not been used for trade, professional or hire purposes.
• The item has not sustained damage through foreign objects, substances or accident
• Accidental damage
• Damage as a result of use not in accordance with the rating plate
• Use of parts and accessories that are not genuine Ninja components
Customer costs within warranty
• The customer is responsible for any inwards freight charge to return a product for warranty if
requested, and outward freight charge for warranty parts and or replacement unit.
Who is covered?
• This warranty applies only to the original purchaser, who bought the product from an
authorised retailer and may not be transferred. Proof of purchase is required.
What is not covered?
• Accessories supplied with the item.
• Components that are subject to natural wear and tear caused by normal use in accordance
with operating instructions.
• Unauthorised/improper maintenance/handling or overload is excluded from this warranty.
ONE (1) YEAR LIMITED WARRANTY

Mann&Noble Asia Pte Ltd
600 North Bridge Road, #23-01 Parkview
Singapore 188778
SG [phone] | MY [phone]
SG ninjakitchen�sg | MY ninjakitchen�my
Illustrations may dier from actual product. We are constantly striving to improve
our products, therefore the specifications contained herein are subject to change
withoutnotice.
FOODI and NINJA are trademarks of SharkNinja Operating LLC.
© 2020 SharkNinja Operating LLC
PRINTED IN CHINA
HB150SMSeries_IB_MP_Mv9
VISIT US ONLINE AT:
SG ninjakitchen.sg MY ninjakitchen.my
200135-15