Ninja BN750ME User manual

ninjakitchenme.com
2-IN-1 BLENDER WITH AUTO-IQ™
BN750ME
INSTRUCTIONS

2ninjakitchenm e.com
THANK YOU
for purchasing the Ninja™2-in-1 Blender with Auto-iQ™
PLEASE READ CAREFULLY AND
KEEP FOR FUTURE REFERENCE.
TECHNICAL SPECIFICATIONS
Voltage: 220-240V~, 50-60Hz
Power: 1200 Watts
TIP: You can find the model and serial
numbers on the QR code label on the
back of the unit by the power cord.
RECORD THIS INFORMATION
Model Number: ��������������������
Serial Number: ���������������������
Date of Purchase: �������������������
(Keep receipt)
Store of Purchase: ������������������

3ninjakitchenm e.com
CONTENTS
Important Safety Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Before First Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Auto-IQ™Programs for the Total Crushing™Jug . . . . . . . . . . . . . . . . . . . . .9
Auto-IQ™ Programs for the Single-Serve Cup . . . . . . . . . . . . . . . . . . . . . . . .9
Manual Programs ................................................9
Using the Total Crushing™ Jug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Using the Single-Serve Cup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Care & Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Storing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Resetting the Motor Thermostat. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Ordering Replacement Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Troubleshooting Guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

4ninjakitchenm e.com
IMPORTANT SAFETY INSTRUCTIONS
PLEASE READ CAREFULLY BEFORE USE • FOR HOUSEHOLD USE ONLY
1 Read all instructions prior to using the
appliance and its accessories.
2 Carefully observe and follow all
warnings and instructions. This unit
contains electrical connections and
moving parts that potentially present
risk to the user.
3 Take your time and exercise care during
unpacking and appliance setup. This
appliance contains sharp, loose blades
that can cause injury if mishandled.
4 Take inventory of all contents to ensure
you have all parts needed to properly
and safely operate your appliance.
5 Blades are sharp. Handle carefully.
6 This product is provided with a Stacked
Blade Assembly and a Chopping Blade
Assembly. A LWAYS exercise care when
handling blade assemblies. The blade
assemblies are sharp and are NOT locked
in place in their containers. The blade
assemblies are designed to be removable
to facilitate cleaning and replacement if
needed. ONLY grasp the blade assembly
by the top of the shaft. Failure to use care
when handling the blade assemblies will
result in a risk of laceration.
7 ALWAYS exercise care when handling
the Pro Extractor Blades™Assembly.
The blades are sharp. ONLY grasp the
Pro Extractor Blades™ Assembly by the
outer perimeter of the blade assembly
base. Failure to use care when handling
the blade assembly will result in a risk of
laceration.
8 Turn the appliance OFF, then unplug the
appliance from the socket when not in
use, before assembling or disassembling
parts, and before cleaning. To unplug,
grasp the plug by the body and pull
from the socket. NEVER unplug by
grasping and pulling the flexible cord.
9 Before use, wash all parts that may
contact food. Follow washing instructions
covered in this instruction manual.
10 Before each use, inspect blade
assemblies for damage. If a blade is
bent or damage is suspected, contact
SharkNinja to arrange for replacement.
11 DO NOT use this appliance outdoors. It
is designed for indoor household
use only.
12
DO NOT operate any appliance with
a damaged cord or plug, or after the
appliance malfunctions or is dropped or
damaged in any manner. This appliance
has no user-serviceable parts. If damaged,
contact SharkNinja for servicing.
WARNING
To reduce the risk of injury, fire, electrical shock or property damage,
basic safety precautions must always be followed, including the following
numbered warnings and subsequent instructions. Do not use appliance for
other than intended use.
Read and review instructions for operation and use.
Indicates the presence of a hazard that can cause personal injury, death or
substantial property damage if the warning included with this symbol is ignored.
For indoor and household use only.
When using electrical appliances, basic safety precautions should always be followed,
including the following:

5
ninjakitchenm e.com
SAVE THESE INSTRUCTIONS
13 This appliance has important markings
on the plug blade. The entire supply
cord is not suitable for replacement. If
damaged, please contact SharkNinja
for service.
14 Extension cords should NOT be used
with this appliance.
15 To protect against the risk of electric
shock, DO NOT submerge the appliance
or allow the power cord to contact any
form of liquid.
16 DO NOT allow the cord to hang over
the edges of tables or worktops. The
cord may become snagged and pull the
appliance o the work surface.
17 DO NOT allow the unit or the cord to
contact hot surfaces, including stoves
and other heating appliances.
18 ALWAYS use the appliance on a dry
and level surface.
19 DO NOT allow children to operate
this appliance or use as a toy. Close
supervision is necessary when any
appliance is used near children.
20 This appliance is NOT intended to be
used by people with reduced physical,
sensory, or mental capabilities, or lack
of experience and knowledge, unless
they have been given supervision
or instruction concerning use of the
appliance by a person responsible for
their safety.
21 ONLY use attachments and accessories
that are provided with the product or
are recommended by SharkNinja. The
use of attachments, including canning jars,
not recommended or sold by SharkNinja
may cause fire, electric shock, or injury.
22 NEVER place a blade assembly on the
motor base without it first being attached
to its corresponding container (Jug or
cup) with the lid also in place.
23 Keep hands, hair, and clothing out of the
container when loading and operating.
24 During operation and handling of
the appliance, avoid contact with
moving parts.
25 DO NOT fill containers past the
MAX FILL or MAX LIQUID lines.
26 DO NOT operate the appliance with
an empty container.
27 DO NOT microwave any containers or
accessories provided with the appliance.
28 NEVER leave the appliance unattended
while in use.
29 DO NOT blend hot liquids. Doing so may
result in pressure buildup and steam
exposure that can pose a risk
of the user being burned.
30 DO NOT process dry ingredients with
the Single-Serve Blending Cup and
Pro Extractor Blades™ Assembly, the Jug
and Stacked Blade Assembly,
or the processor bowl and Chopping
Blade Assembly.
31 To reduce the risk of injury, never place
Chopping Blade Assembly or discs on
base without first putting bowl properly
in place.
32 DO NOT perform grinding operations
with the Single-Serve Blending Cup
and Pro Extractor Blades™ Assembly,
the Jug and Stacked Blade Assembly.
33 NEVER operate the appliance without
lids and caps in place. DO NOT attempt
to defeat the interlock mechanism.
Ensure the container and lid are properly
installed before operation.
34 Before operation, ensure all utensils are
removed from containers. Failure to
remove utensils can cause containers to
shatter and potentially result in personal
injury and property damage.

6ninjakitchenm e.com
SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
PLEASE READ CAREFULLY BEFORE USE • FOR HOUSEHOLD USE ONLY
WARNING
To reduce the risk of injury, fire, electrical shock or property damage,
basic safety precautions must always be followed, including the following
numbered warnings and subsequent instructions. Do not use appliance for
other than intended use.
35 Keep hands and utensils out of
containers while chopping to reduce the
risk of severe personal injury or damage
to the blender/food chopper. A scraper
may be used ONLY when the blender
or processor is not running. When using
the processor, always use food pusher to
add food. NEVER add food by hand.
36 If you find unmixed ingredients sticking to
the sides of the cup, stop the appliance,
remove the blade assembly, and use a
scraper to dislodge ingredients.
37 DO NOT open the Jug’s pour spout cap
while blender is operating.
38 If you find unmixed ingredients sticking
to the sides of the Jug, stop the
appliance, remove the lid, and use a
spatula to dislodge ingredients. NEVER
insert your hands into the Jug, as you
may contact one of the blades and
experience a laceration.
39 DO NOT attempt to remove the
container or lid from the motor base
while the blade assembly is still spinning.
Allow the appliance to come to a
complete stop before removing lids and
containers.
40If the appliance overheats, a thermal
switch will activate and temporarily
disable the motor. To reset, unplug
the appliance and allow it to cool
for approximately 30 minutes before
using again.
41 DO NOT expose the containers and
accessories to extreme temperature
changes. They may experience damage.
42 Upon completion of processing, ensure
the blade assembly is removed BEFORE
emptying container’s contents. Remove
the blade assembly by carefully grasping
the top of the shaft and lifting it from
the container. Failure to remove the
blade assembly before emptying the
container results in a risk of laceration.
43 If using the Jug’s pour spout, hold the
cover in place on the container or ensure
lid lock is engaged when pouring to
avoid risk of injury.
44 Remove the Pro Extractor Blades™
Assembly from the Single-Serve Cup
upon completion of blending. DO
NOT store ingredients before or after
blending them in the cup with the blade
assembly attached. Some foods may
contain active ingredients or release
gases that will expand if left in a sealed
container, resulting in excessive pressure
buildup that can pose a risk of injury. For
ingredient storage in the cup, use only
Spout Lid to cover.
45 The maximum wattage rating for this
appliance is based on the configuration
of the Pro Extractor Blades™ Assembly and
Single-Serve Cup. Other configurations
may draw less power or current.
46 DO NOT submerge the motor base or
control panel in water or other liquids.
DO NOT spray motor base or control
panel with any liquid.
47 DO NOT attempt to sharpen blades.
48 Turn o the appliance and unplug the
motor base before cleaning.

7
ninjakitchenm e.com
PARTS
A
C
E
F
G
B
D
PARTS
AJug Lid
B2.1 L* Total Crushing™ Jug
CMotor Base
(attached power cord not shown)
DStacked Blade Assembly
ESpout Lid
FPro Extractor Blades™Assembly
G700 ml Single-Serve Cup
*1.8 L max liquid capacity.
There are a variety of accessories that are
compatible with this blenderseries.
NOTE: The top flap of your box shows
the select accessories that are included
with your model.

8ninjakitchenm e.com
1 Remove all packaging materials from the
unit. Exercise care when unpacking blade
assemblies, as the blades are sharp.
2 The Stacked Blade Assembly is NOT
locked in place in their containers.
Handle the Stacked Blade Assembly by
grasping the top of the shaft.
3 Handle the Pro Extractor Blades™
Assembly by grasping around the
perimeter of the blade assembly base.
4 Wash containers, lids, and blade
assemblies in warm, soapy, water using
a dishwashing utensil with a handle to
avoid direct contact with the blades.
Exercise care when handling blade
assemblies, as the blades are sharp.
5 Thoroughly rinse and air-dry all parts.
6 Wipe control panel with a soft cloth.
Allow it to dry completely before using.
BEFORE FIRST USE
IMPORTANT: Review all warnings on
pages 4–6 before proceeding.
DID YOU KNOW?
• You can take your drinks on the go using
the spout lid.
NOTE: All attachments are BPA free
and dishwasher safe. It is recommended
that the containers, lids, and blade
assemblies be placed on the top
rack of the dishwasher. Ensure blade
assemblies and lids are removed
from the containers before placing in
the dishwasher. Exercise care when
handling blade assemblies.

9
ninjakitchenm e.com
FEATURES
BLEND
Make drinks containing fresh or frozen
fruit, liquids and ice, or blend together
dips, dressings and salsas.
MAX BLEND
Ideal for tougher ingredients including
skins, seeds and stems or when you
want an even smoother result.
CRUSH
Turn ice and frozen ingredients into
blended frozen drinks and desserts.
AUTO-IQ™ PROGRAMS
Use the Power button to turn the unit on or o.
AUTO-IQ™ PROGRAMS
Intelligent preset programs combine unique blending and pausing patterns that do
the work for you. Once a preset program is selected, it will start immediately and
automatically stop when blending is complete. To stop blending before the end of the
program, press the currently active button again.
NOTE: The unit can detect which container is installed on the motor base. Only the
functions available for a particular container will illuminate on the control panel.
MANUAL PROGRAMS
LOW, MEDIUM, and HIGH
When selected, each of these speeds
runs continuosly for 60 seconds. Press
the currently active button again to stop
the program sooner. They do not work in
conjunction with any Auto-IQ™programs.
PULSE
Oers greater control of pulsing and
blending. Operates only when PULSE is
pressed. Use short presses for short pulses
and long presses for long pulses.

10 ninjakitchenm e.com
1 Plug in motor base and place on a clean,
dry, level surface such as a worktop or
table.
2 Lower the Total Crushing™ Jug onto
the motor base. The handle should be
aligned slightly to the right and the Jug
should be oriented so the LOCK symbols
are visible on the motor base. Rotate the
Jug clockwise until it clicks into place.
USING THE TOTAL CRUSHING™JUG
3 Exercising care, grasp the Stacked
Blade Assembly by the top of the shaft
and place it onto the drive gear inside
the Jug. Note that the blade assembly
will fit loosely onto the drive gear.
4 Add ingredients to the Jug. DO NOT
add ingredients past the MAX LIQUID
line on the Jug.
IMPORTANT: Review all warnings on
pages 4–6 before proceeding.
NOTE: Auto-iQ™ programs have pauses
and changes in speed throughout
the cycle.
NOTE: DO NOT add ingredients before
installing the Stacked Blade Assembly.
NOTE: If the Stacked Blade Assembly is
not fully seated, you will not be able to
install and lock the lid.
IMPORTANT: As a safety feature, if the
Jug and lid are not properly installed, the
timer will display “... ...” and the motor
will be disabled. If this happens, repeat
step 5 on the following page. When the
Jug and lid are properly installed, the
program button LEDs will illuminate,
indicating the appliance is ready to use.
NOTE: The handle on the jug lid will not
fold down unless it is attached to the
jug.

11
ninjakitchenm e.com
5 Place the lid on the Jug, aligning the
triangle symbol on the lid with the
triangle symbol on the handle. Press
down on the handle until it clicks into
place. The triangle symbols MUST be
aligned for the lid to lock and the unit to
operate. Once the lid is locked in place,
press the Power button to turn unit
on. The available program buttons will
illuminate and the unit will be ready
for use.
6a If using an Auto-iQ™ program, first select
the program that best suits your recipe.
The preset feature will automatically stop
at the end of the program. To stop the
unit at any time, press the currently active
button again.
6b If using a manual program, select your
desired speed. Once the ingredients
have reached your desired consistency,
press the active button again, or wait
for the unit to come to a complete stop
after 60 seconds.
7 To remove the Jug from the motor
base, turn the Jug anti-clockwise
and then lift up.
8a To pour out thinner mixtures, ensure
the lid is locked in place, then open the
pour spout cap.
8b For thicker mixtures that cannot be
emptied through the pour spout,
remove the lid and Stacked Blade
Assembly before pouring. To remove
the lid, press the RELEASE button and
lift the handle. To remove the blade
assembly, carefully grasp it by the
top of the shaft and pull straight up.
The Jug can then be emptied.
9 Turn the unit o by pressing the Power
button. Unplug the unit when finished.
Refer to the Care & Maintenance section
for cleaning and storage instructions.

12 ninjakitchenm e.com
1Plug in motor base and place on a
clean, dry, level surface such as a
worktop or table.
2Add ingredients to the Single-Serve
Cup. DO NOT add ingredients past
the MAX LIQUID line.
3 Install the Pro Extractor Blades™
Assembly onto the top of the cup. Twist
the lid clockwise until it’s sealed tightly.
4Turn the cup upside down and install on
the motor base. Align the tabs on the cup
with the slots on the base, then rotate
cup clockwise until it clicks into place.
Once the cup is locked in place, press
the Power button to turn unit on. The
available program buttons will illuminate
and the unit will be ready for use.
IMPORTANT: Review all warnings on
pages 4–6 before proceeding.
NOTE: Auto-iQ™ programs have pauses
and changes in speed throughout
the cycle.
USING THE SINGLE-SERVE CUP
5a If using an Auto-iQ™program, first select
the program that best suits your recipe.
The preset feature will automatically
stop at the end of the program. To stop
the unit at any time, press the currently
active program again.
5b If using a manual program, select your
desired speed. Once the incredients
have reached your desired consistency,
press the active button again, and wait
for the unit to come to a complete stop.

13
ninjakitchenm e.com
6To remove the cup from the motor
base, turn the cup anti-clockwise and
then lift up.
7 Remove the Pro Extractor Blades™
Assembly by twisting the cap
anti-clockwise. DO NOT store
blended contents with Pro Extractor
Blades™Assembly attached. Exercise
care when handling the blade assembly,
as the blades are sharp.
8Turn the unit o by pressing the Power
button. Unplug the unit when finished.
Refer to the Care & Maintenance section
for cleaning and storage instructions.
9To enjoy your drink on the go, place
the Spout Lid onto the Single-Serve
Cup and twist lid clockwise until firmly
sealed. For storing ingredients in the
cup, use only the Spout Lid to cover.

ninjakitchen
14ninjakitchenm e.com
CARE & MAINTENANCE
CLEANING
Separate all parts. Wash all containers in
warm, soapy water with a soft cloth.
• Hand-Washing
Wash blade assemblies in warm, soapy
water using a dishwashing utensil with
a handle to avoid direct contact with
the blades. Exercise care when handling
blade assemblies as the blades are sharp.
Thoroughly rinse and air-dry all parts.
• Dishwasher
All attachments are dishwasher safe. It is
recommended that the lids, containers,
and blade assemblies be placed on the
top rack of the dishwasher ONLY. Ensure
the blade assemblies are removed from
their containers before placing in the
dishwasher. Exercise care when handling
blade assemblies.
• Motor Base
Turn o the unit and unplug the motor
base before cleaning. Wipe motor base
with a clean, damp cloth.
DO NOT use abrasive cloths, pads, or
brushes to clean the base.
STORING
Wrap the power cord around the cord
wrap on the back of the motor base.
Store the unit upright and store all blade
assemblies inside or attached to their
respective containers with their lids locked
in place.
DO NOT store blended or unblended
ingredients in the Single-Serve Cup
with the Pro Extractor Blades assembly
attached.
DO NOT stack items on top of the
containers. Store any remaining
attachments alongside the unit or in a
cabinet where they will not be damaged
or create a hazard.
RESETTING THE MOTOR
This unit features a unique safety system
that prevents damage to the motor and
drive system should you inadvertently
overload the it. If the unit is overloaded,
the motor will be temporarily disabled.
Should this occur, follow the reset
procedure below.
1 Unplug the unit from the socket.
2 Allow the unit to cool for approximately
15 minutes.
3 Remove the container’s lid and blade
assembly. Empty the container and
ensure no ingredients are jamming the
blade assembly.
IMPORTANT: Ensure that maximum
capacities are not exceeded. This is the
most typical cause of appliance overload.
REPLACEMENT PARTS
To order additional parts and attachments,
visit ninjakitchenme.com or contact
Customer Service at [phone].

TROUBLESHOOTING GUIDE
WARNING: To reduce the risk of shock and unintended operation,
turn power o and unplug unit before troubleshooting.
Unit doesn’t turn on.
•Make sure unit is plugged in.
Display will read “--” once connected to power.
•Place container on base and rotate it clockwise until container clicks into place. Press the
Power button to turn unit on, and the available programs will illuminate indicating the
unit is ready for use.
Display reads “Er”.
•If the display reads “Er”, unplug the unit from the socket and allow it to cool for
15 minutes. Remove the container’s lid and blade assembly and empty the contents
to ensure no ingredients are jamming the blade assembly.
Lid/Pro Extractor Blades™Assembly is hard to install on the cup.
•Place the cup on a level surface. Carefully place the lid or Pro Extractor Blades™Assembly
on the top of the cup and align the threads so the lid/Pro Extractor Blades™Assembly sits
flat on the cup. Twist clockwise until you have a tight seal.
Unit doesn’t mix well; ingredients get stuck.
•Using the Auto-IQ™programs is the easiest way to achieve great results. The pulses and
pauses allow the ingredients to settle toward the blade assembly. If ingredients are
routinely getting stuck, adding some liquid will usually help.
•When filling the cup, start with fresh fruit or vegetables, then leafy greens or herbs. Next
add liquids or yoghurt, then seeds, powders, or nut butters. Finally, add ice or frozen
ingredients.
Motor base won’t stick to worktop or tabletop.
•Make sure surface and suction feet are wiped clean. Suction feet will only stick to
smooth surfaces.
•Suction feet will not stick on some surfaces such as wood, tile, and non-polished finishes.
•DO NOT attempt to use unit when the motor base is stuck to a surface that is not secure
(cutting board, platter, plates, etc.).
Unit is dicult to remove from worktop for storage.
•Place your hands underneath both sides of the motor base and gently pull the unit up
and toward you.
Unit displays a blinking “... ...” message.
•The unit can detect which container is on the motor base. You may be trying to use a
program that is not designed for the container you have installed. The programs will
light up, indicating which programs are available for each container.
The unit doesn’t create snow from solid ice.
•DO NOT use ice that has been sitting out or has started to melt. Use ice straight from
the freezer.
•Start with a few pulses and then use a continuous blending cycle.
The jug lid handle will not fold down.
•If not attached to the jug, the handle will not fold down. For storage, place the lid on the
jug and press down on the handle until it clicks into place.
•Start with a few pulses and then use a continuous blending cycle.
ninjakitchenm e.com 15

WARRANTY
TWO (2) YEAR LIMITED REPLACEMENT WARRANTY
For guarantee claims, you will need to submit a proof of purchase in the form of a valid receipt that displays date and
place of purchase. This warranty does not replace but is in addition to your statutory rights.
If your product becomes defective due to faulty material or workmanship within a period of 2 years from the date of
purchase, we warrant to do the following:
• We will replace the defective/faulty part with a new product, free of charge, or if the unit is deemed defective/faulty
we replace the unit with an equivalent or upgraded model, at our discretion.
Replacement items will be covered by the limited warranty for the balance of the warranty period from the date of the
original purchase.
Your warranty is subject to the following conditions
• DO NOT operate the appliance with a damaged plug or cord, or if the unit has been dropped, damaged or dropped
in water appliance on your own. If the supply cord is damaged, it must be replaced by a qualified electrician to avoid a
hazard. Incorrect re-assembly or repair can cause a risk of electric shock or injury to persons when the appliance is
used
• The item has not been misused, abused, neglected, altered, modified or repaired by anyone
• The item has not been used for trade, professional or hire purposes
• The item has not sustained damage through foreign objects, substances or accident
Customer costs within warranty
The customer is responsible for any inwards freight charge to return a product for warranty if requested, and outward
freight charge for warranty parts and or replacement unit.
Who is covered?
This warranty applies only to the original purchaser, who bought the product from an authorized retailer and may not
be transferred.Proof of purchase is required.
What is not covered?
• Accessories supplied with the item
• Components that are subject to natural wear and tear caused by normal use in accordance with operating
instructions
• Unauthorized/improper maintenance/handling or overload is excluded from this warranty
ninjakitchenm e.com 16

www.ninjakitchenme.com
Illustrations may dier from actual product. We are constantly striving to improve our products,
therefore the specifications contained herein are subject to change without notice.
AUTO-IQ, NINJA, PRO EXTRACTOR BLADES, and TOTAL CRUSHING are trademarks of
SharkNinja Operating LLC.
©2020 SharkNinja Operating LLC
PRINTED IN CHINA
BN750ME�IB�MP�Mv3
VISIT US ONLINE AT:
ninjakitchenme.com
Or follow us on any of our social media pages:
FPOFPO
@ninjakitchenme.com
Goodrich General Trading Fzc
Office No.4 Plot 364-446,
Dubai, United Arab Emirates
Street 18A, Al Quoz 1
NOTE: Save these instructions. Keep for future reference.

ninjakitchenme.com
BN750ME





ninjakitchenme.com


.







--





ninjakitchenme.com






























