QUESTIONS? We’re here to help. Call 1-877-646-5288 or visit ninjakitchen.com
MANUAL FUNCTIONS
If searing is necessary before slow cooking,
follow the STOVE TOP instructions first.
1. Place ingredients in the pot and cover pot
with lid.
NOTE: DO NOT fill the pot more than 2/3full.
2. Press the ACCUTEMP SLOW COOK button
to select HIGH, LOW, or WARM. The button will
default to HIGH. Pressing it again will set it to
WARM. Pressing it a third time will set it to LOW.
Pressing it a fourth time will cycle it back to HIGH.
3. Rotate the knob to adjust the cooking time
and temperature.
4. Once you have selected the slow cook mode
and time, the unit will begin the cooking cycle
after 3 seconds.
NOTE: Use the ACCUTEMP Slow Cook Warm
setting ONLY to keep already-hot, fully cooked
food warm. DO NOT attempt to cook cold or
room-temperature ingredients on the ACCUTEMP
Slow Cook Warm setting.
1. Place pot inside main housing and pour water
into pot, based on the recipe you are following.
DO NOT pour any liquid into the unit’s main
housing.
2. Cover pot with the lid, ensuring the steam vent
on the lid is facing away from you.
3. Press the STEAM button.
4. Rotate the knob to adjust the cooking time
and temperature.
5. Once you have set the steaming time, the unit
will begin the steaming cycle after 3 seconds.
The unit will beep and the Temp/Time display
will read “P:” to signify the unit is preheating.
6. While the unit preheats, arrange your ingredients
on the steaming/roasting rack.
7. When the unit is ready to steam, it will beep
and the timer will begin to count down.
8. CAREFULLY open the lid away from you and use
oven mitts to place the rack in the pot.
1. Place ingredients in the cooking pot and cover
pot with lid. If your recipe calls for using the
steaming/roasting rack, place your ingredients
on it and place it in the cooking pot. Cover pot
with lid.
2. Press the BAKE button to select either DRY
or STEAM. The button will default to DRY.
Pressing the button again will set it to STEAM.
Pressing it a third time will cycle it back to DRY.
Use BAKE DRY for meats and roasts, and
use BAKE STEAM for fish, breads, and desserts.
3. Rotate the knob to adjust the cooking time
and temperature.
4. Once you have selected the bake mode,
temperature, and time, the unit will begin the
baking cycle after 3 seconds.
1. Place ingredients you want to sear, sauté,
simmer, or brown in the pot in an even layer.
2. Press the STOVE TOP button to select either
HIGH or LOW. The button will default to HIGH.
Pressing the button again will set it to LOW.
Pressing it a third time will cycle it back to HIGH.
3. Once you have selected HIGH or LOW, the
display will read “ON” and the unit will begin the
cooking cycle after 3 seconds.
ACCUTEMP SLOW COOK STEAM
BAKE STOVE TOP
CS960 SERIES
Please make sure to read the enclosed Ninja® Owner’s Guide prior to using your unit.
