Ninja Master Prep QB1000QUK series User manual

Master Prep® Professional
QB1000QUK series
OWNER’S GUIDE
®

2FREEPHONE: 0800 51 41 31
IMPORTANT SAFETY INSTRUCTIONS
For Household Use Only
WHEN USING ELECTRICAL APPLIANCES,
BASIC SAFETY PRECAUTIONS SHOULD
ALWAYS BE FOLLOWED, INCLUDING THE
FOLLOWING:
READ ALL INSTRUCTIONS BEFORE
USING YOUR NINJA®MASTER PREP®
PROFESSIONAL.
IMPORTANT:
This appliance is not intended for use by persons with
reduced physical, sensory or mental capabilities, or lack
of experience and knowledge, unless they have been
given supervision or instruction concerning use of the
appliance by a person responsible for their safety.
Children shall not use or play with this appliance.
Close supervision is necessary to keep appliance and
cord out of reach of children during use.
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC
SHOCK OR INJURY:
1To protect against electric shock, DO NOT
immerse cord, plug or any part of the main unit in
water or any other liquids.
2DO NOT let cord hang over edge of table or
counter, or touch hot surfaces.
3DO NOT allow children to operate the appliance
or use as a toy. Close supervision is necessary
when any appliance is used near children.
4 DO NOT use with damaged cord or plug.
5 DO NOT USE if the appliance is not working, has
been dropped, dropped into water, damaged or
left outdoors.
6 NO SERVICEABLE PARTS. Incorrect re-assembly
or repair can cause a risk of electrical shock or
injury to persons when the appliance is used.
Contact Customer Service.
7Unplug appliance from outlet when not in use and
before cleaning.
8 DO NOT place on or near a hot gas or
electricburner.
9 DO NOT use appliance for other than
intendeduse.
10 DO NOT operate the appliance for more than
15seconds.
11 Extreme caution must be used when moving an
appliance containing hot food, water or other liquids.

3
12 Use this appliance on a stable work surface away
from water.
13 DO NOT remove the motor head before the
chopping blades have stopped turning.
14 CAUTION! Chopping blades are sharp, handle
with care. When handling the chopping blades,
always hold by the plastic shaft.
15 DO NOT attempt to sharpen blades.
16 DO NOT expose jars to extreme
temperaturechanges.
17 DO NOT use jars if they are cracked or chipped.
18 DO NOT use the appliance if chopping blades are
bent or damaged.
19 Avoid contact with moving parts at all times.
Keep hands, hair, clothing as well as spatulas
and other utensils away from pitcher or chopping
container during operation to prevent risk of
personal injury and /or damage to the appliance.
20 Exercise extreme caution when blending
hotliquids.
21 Immediately release the On/Off pulse button on
the motor head in the event that the appliance
malfunctions during use.
22 To reduce the risk of injury, NEVER operate the
appliance without the splash guard in place;
DO NOT try to defeat the interlock mechanism;
make sure that the cutting blades are properly
assembled before operating the appliance.
23 DO NOT use outdoors.
24 DO NOT operate the appliance empty.
25 If the appliance overheats, a thermal switch will
become activated and shut off the motor. To
reset, unplug the appliance and let it cool down
for approximately 10 minutes before using again.
26 The use of accessory attachments, including
canning jars not recommended by EURO-PRO
Operating LLC may cause fire, electrical shock or
risk of personal injury.
NOTE: This unit has a short power supply cord to
reduce the risk resulting from becoming entangled
in or tripping over a long cord. An extension cord
may be used if you are careful in its use.
1If using an extension cord, the electrical rating
of the extension cord should be rated at least
15 amperes. Extension cords rated for less
amperage may overheat.
2An extension cord must be arranged so that it
will not drape over the countertop or tabletop
where it can be pulled on by children or tripped
over accidentally.
SAVE THESE
INSTRUCTIONS

4FREEPHONE: 0800 51 41 31
THIS BOOK COVERS MODEL NUMBERS:
QB1000QUKMR 30
QB1000QUKMW 30
QB1000QUKMK 30
TECHNICAL SPECIFICATIONS
Voltage: 220-240V~, 50/60Hz
Power: 500 Watts
Pitcher Capacity: 1.18 L
Bowl Capacity: 500 ml
Euro-Pro, Ninja, and Ninja Master Prep are trademarks of
Euro-Pro Operating LLC.
This appliance complies with the WEEE-Directive 2002/96/EC on the disposal of electrical and electronic
equipment (WEEE).
This appliance complies with the European directives for electromagnetic compatibility (EMC) 2004/108/EC and its
revisions, as well as Low Voltage Directive (LVD) 2006/95/EC and its revisions.
This marking indicates that this product should not be disposed with other household wastes throughout
the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal,
recycle it responsibly to promote the sustainable reuse of material sources. To return your used device,
please use the return and collection systems or contact the retailer where this product was purchased.
They can take this product for environmental safe recycling.

5
Contents
Thank you for
purchasing
the Ninja®
Master Prep®
Professional.
Getting Started ...................................................................................................... 6
Using the Master Prep®Professional Pitcher............................................................ 8
Using the Master Prep®Professional Bowl............................................................. 10
Cleaning and Maintenance ................................................................................... 12
Troubleshooting Guide.......................................................................................... 13

6FREEPHONE: 0800 51 41 31
Getting Started
b
d
f
e
g
n
h
j
i
a
k
c
l
m
iBowl Splash Guard
jUpper Blade
kLower Blade
lMaster Prep®Professional Bowl with
Non-Slip Base (x 2)
mSpindle Pin
nBowl Storage Lid (x 2)
oPower Cord (not shown)
aOn/Off Pulse Button
bPower Head
cPouring Spout
dPitcher Splash Guard
eNinja®4-Blade
fMaster Prep®Professional Pitcher
with Non-Slip Base
gSpindle Pin
hPitcher Storage Lid

7
The Ninja®Master Prep®Professional is an indispensable kitchen tool that is perfect for blending, chopping, mixing or
pureeing when preparing your favorite recipes. For best results, be sure to carefully read all the instructions contained in
the manual before using this appliance.
500 Watt Power Head
NEVER allow the power head to become wet when plugged into an electrical outlet.
WARNING: The power head should never be immersed in water or any other liquid.
CAUTION: Make sure that the power head is unplugged from the electrical outlet and that the blades have stopped
turning before attaching or removing any accessory.
CAUTION: Blades are sharp! Use extreme caution when handling the blades. Always hold them by the shaft. Do not
attempt to sharpen blades.
IMPORTANT: Never run the appliance empty.

8FREEPHONE: 0800 51 41 31
Using the Master Prep®Professional Pitcher
Shaft
CAUTION: Blades are sharp! Use extreme caution when
handling the blades. Always hold them by the shaft.
IMPORTANT: Never run the appliance empty.
1Place the Master Prep®Professional Pitcher on a clean,
dry, level surface.
2Holding the blade by the shaft, place it onto the spindle pin
inside the Master Prep®Professional Pitcher.
• Use the Ninja®4-Blade in the Pitcher. (fig. 1)
IMPORTANT: Place blade inside the container carefully as
blades are sharp.
(fig. 1)
WARNING: DO NOT try to place the blade onto the power
head and then into the Master Prep®Professional Pitcher.

9
3Add the ingredients to be processed into the Master Prep®
Professional pitcher.
IMPORTANT: Never add ingredients into the Master Prep®
Professional pitcher before placing the blades in first.
4Place the pitcher splash guard onto the top of the Master
Prep®Professional pitcher. (fig. 2)
5Place the power head on top of the pitcher splash guard
making sure that it is securely in place. (fig. 3) DO NOT
attempt to operate the appliance without the safety splash
guard in place.
6To start the appliance, plug the power cord into the
electrical outlet, securely hold power head while operating
and press on the on/off pulse button located on the top of
the power head. (fig. 3)
7Hold the Master Prep®Professional pitcher firmly while
depressing the on/off pulse button to ensure the unit
stays in place.
NOTE: DO NOT operate the appliance continuously for
more than 15 seconds at a time.
8To stop the appliance, remove your fingers from the on/off
pulse button.
(fig. 2) (fig. 3)
9In order to obtain a better quality of chopping, operate the
appliance by using the “pulse” method.
10 Make sure that the blades have stopped completely before
removing the power head.
11 If the ingredients stick to the side of the Master Prep®
Professional pitcher, stop the appliance, remove the power
head and the splash guard. Use a spatula to dislodge the
pieces and then replace the splash guard and the power
head. Continue processing.
12 Depending on the consistency of the contents, use the
pouring spout to empty liquid contents.
13 For thicker consistencies, first remove splash guard and
blade (by its shaft), then empty contents of the Master
Prep®Professional Pitcher.
HINTS & TIPS FOR USING YOUR NINJA®MASTER
PREP®PROFESSIONAL
• To crush ice into snow, start by using short pulses to break
up large chunks. Continue until snow is achieved.

10 FREEPHONE: 0800 51 41 31
Using the Master Prep®Professional Bowl
Shaft
WARNING: DO NOT crush ice in 500 ml chopper bowl or
damage may occur to the unit.
CAUTION: Blades are sharp! Use extreme caution when
handling the blades. Always hold them by the shaft.
IMPORTANT: Never run the appliance empty.
1Place the Master Prep®Professional bowl on a clean, dry,
level surface.
2Holding the lower blade by the shaft, place it over the
spindle pin inside the Master Prep®Professional bowl.
(fig. 4)
3Carefully insert the upper blade over the lower blade
rotating it until it locks onto the lower blade. (fig. 5)
(fig. 4) (fig. 5)
IMPORTANT: Always assemble the blades inside the
container.
WARNING: DO NOT try to place the blades onto the power
head and then into the Master Prep®Professional bowl.
4Place the food that you want to process into the Master
Prep®Professional bowl.
IMPORTANT: Never add ingredients into the Master Prep®
Professional bowl before placing the blade assembly in first.
NOTE: DO NOT OVERFILL. Do not fill dry ingredients
past the 450ml line or do not add more than 230ml liquid
ingredients as this will strain the motor and cause overflow.

11
5Place the splash guard on the bowl. (fig. 6)
6Place the power head on top of the splash guard making
sure that it is securely in place. (fig. 7) DO NOT attempt
to operate the appliance without the safety splash guard in
place.
7To start the appliance, plug the power cord into the
electrical outlet, securely hold power head while operating
and press on the on/off pulse button located on the top of
the power head. (fig. 8)
8Hold the Master Prep®Professional bowl firmly while
depressing the on/off pulse button to ensure the unit stays
in place.
NOTE: DO NOT operate the appliance continuously for
more than 15 seconds at a time. Be careful not to over
process. For coarsely chopped foods, use repeated short
pulsing action until the desired consistency is reached.
9 To stop the appliance, remove your fingers from the on/off
pulse button.
10 In order to obtain a better quality of chopping, operate the
appliance by using the “pulse” method.
11 Make sure that the blades have stopped completely before
removing the power head.
(fig. 6) (fig. 7) (fig. 8)
12 If the ingredients stick to the side of the Master Prep®
Professional bowl, stop the appliance, remove the power
head and the splash guard. Use a spatula to dislodge the
pieces and then replace the splash guard and the power
head. Continue processing.
13 Remove the blade assembly by its shaft before you empty
the contents of the Master Prep®Professional bowl.
HINTS & TIPS FOR USING YOUR NINJA®MASTER
PREP®PROFESSIONAL
• The chopping blades can be used for chopping meat, fish,
vegetables, cheese etc.
• For mincing, chopping and pureeing, increase the length of
pulses.
• For coarse chopping, use short, quick pulses and monitor
food texture.
• Pre-cut larger pieces to make them fit into the Master
Prep®Professional. When chopping hard foods (e.g. meat,
cheese) cut into 1-inch cubes.

12 FREEPHONE: 0800 51 41 31
Cleaning and Maintenance
CAUTION: Make sure that the power head is unplugged from power source before inserting or removing any attachment
and before cleaning.
DO NOT immerse the power head into water or any other liquid. Clean with a damp sponge or cloth and wipe dry.
The Master Prep®Professional pitcher, Master Prep®Professional bowl, storage lids, Master Prep®Professional splash
guards and chopping blades are all dishwasher safe. It is recommended to place the storage lids and the chopping
blades on the top rack. Use extreme caution when handling the chopping blades as they are very sharp.
Clean the Ninja®Master Prep®Professional and all parts before first use and immediately after each use.

13
PROBLEMS POSSIBLE REASONS & SOLUTIONS
Motor Doesn’t Start or Blades
Don’t Rotate.
Check that the bottom of motor head is clean and there is no food blocking connection
when placing on containers.
There is too much food in the container.
The unit has overheated. Unplug and wait approximately 10 minutes before using again.
Make sure the splash guard is securely on container.
Make sure the power head is securely placed on splash guard.
Check that the plug is securely inserted into the electrical outlet.
Check fuse or breaker. Replace fuse/reset breaker.
Food is Unevenly Chopped.
Either you are chopping too much food at one time, or the pieces are not small
enough. Try cutting the food into smaller pieces of even size and processing smaller
amounts per batch.
Food is Chopped Too Fine or is
Too Watery.
The food has been over processed. Use brief pulses or process for shorter time. Let
blades stop completely between pulses.
Food Collects On Splash
Guard/Safety Cover or On the
Sides of the Master Prep®
Professional Pitcher or Master
Prep®Professional Bowl.
You may be processing too much food. Turn the machine off. When the blades stop
rotating, remove the power head and the splash guard. Remove some of the food
being processed.
You Cannot Achieve Snow
From Solid Ice.
Do not use ice that has been sitting out or has started to melt. Be sure to use short
pulses in the beginning to break up large pieces.
Troubleshooting Guide

14 FREEPHONE: 0800 51 41 31
Notes or your favorite recipes

15
Notes or your favorite recipes

Technical Details
Model number: QB1000QUK Series
Input: 500 Watts
Main unit voltage: 220/240V~, 50/60Hz
For customer service please contact:
QVC
South Boundary Road
Knowsley, Liverpool
L70 2QA
Tel.: [phone]
COPYRIGHT© EURO-PRO OPERATING LLC 2014
PRINTED IN CHINA
Euro-Pro, Ninja, and Ninja Master Prep are trademarks
of Euro-Pro Operating LLC.
QB1000QUK.series.30.140414.7
Illustrations may differ from actual product.