Nivona CafeRomatica 630 Operating instructions

CafeRomatica
Fully automatic coffee centre
Operating Instructions and Useful Tips
630
650
A passion for coffee.
Downloaded from CoffeeMachineManual.com Manuals

2
Operating Instructions and Useful Tips
Dear Customer,
Congratulations and many thanks for choosing a high-quality
NIVONA product. To get the most out of your NIVONA machine,
please read this manual carefully before use. Please start by
reading the safety notes.
Please keep this manual in a safe place. You may want to use
it as reference guide or hand it on to any further users of your
machine.
Purchase made at
Place, date
Downloaded from CoffeeMachineManual.com Manuals

3
Equipment
Bean container
with lid
A
Drip grill
J
Milk-frothing device
‘spumatore’, hot
water jet
R
Symbol display screen
B
Removable water
tank
C
Water quantity
control knob
D
On / Off button
E
Coffee strength
button
F
1-cup button
G
2-cup button
H
Height-adjustable
coffee spout
I
Drip tray
Fill level indicator
for drip tray
K
L
Pre-ground coffee
chamber
M
Cup holding plate
N
Steam warm-up /
rinse button
O
Steam / hot water
valve control knob
P
Grinder settings
(on rear)
Q
Nameplate with
model name
S
Power cord storage
compartment (on rear)
T
Used coffee tray
(inside)
U
Rear rollers, under-
neath, NICR650 only
V
Cup illumination,
NICR650 only
W
1
A
B
C
D
E
F
G
H
M
N
O
P
Q
R
S
T
U
V
W
I
J
K
L
Downloaded from CoffeeMachineManual.com Manuals

Equipment
234
5
8
9
10
6 7
aControl knob
bAir inlet valve
Air inlet pipe
cInlet valve
dSteam / hot water jet
eLiquid inlet hose
a
b
c
d
e
Downloaded from CoffeeMachineManual.com Manuals

Symbols
Number
11
12
13
14
15
16
17
18
19
20
Symbol Brief description
Coffee strength MILD
Coffee strength NORMAL
Coffee strength STRONG
Not enough coffee beans – fill container
Fill water tank
Pre-ground coffee
Hot water / steam, open / closed
Empty used coffee tray / drip tray
Descale machine
Clean machine
Flashing
Downloaded from CoffeeMachineManual.com Manuals

Contents
1. Safety instructions
2. Set up
2.1 Preparing the machine
2.2 Getting started
2.3 Grinder settings
3. Making coffee
3.1 Selecting coffee strength
3.2 Selecting water quantity
3.3 Making one cup
3.4 Making two cups
3.5 Using pre-ground coffee
3.6 Drawing hot water
3.7 Drawing steam / frothing milk
3.7.1 Drawing steam
3.7.2 Frothing milk, hot milk and cappuccino
4. Programming functions
4.1 Filter
Inserting filter
Operating without a filter
4.2 Water hardness
4.3 Temperature
4.4 Automatic switch off
4.5 ECO mode
5. Maintenance and care
5.1 Changing filter
5.2 Cleaning program
Manual cleaning
5.3 Descaling
Manual descaling
5.4 General cleaning
Cleaning the brewing unit
6. System messages
7. Troubleshooting
8. Further instructions
Downloaded from CoffeeMachineManual.com Manuals

7
1. Safety instructions
• The machine is for domestic use
only and is not suitable for
commercial applications. Other-
wise, claims under the guarantee
will not be accepted.
• Operating voltage must be the
same as mains voltage. Please
note the model nameplate /
sticker on the underside of the
machine (fig. 1/S).
• Do not operate the machine if
the power cord or machine case
is damaged.
• Keep the power cord away from
hot parts.
• Do not unplug the machine by
pulling on the power cord.
• Observe the cleaning & descal-
ing instructions provided. Other-
wise, claims under the guarantee
will not be accepted.
• Make sure to switch off and
unplug the machine before
maintenance or cleaning.
• Place the machine on a firm, level
surface and use it indoors only.
• Do not place the machine on a
hot surface or near open flames.
• Keep out of reach of children
and ensure that they do not play
with the appliance.
• Always unplug the machine
during extended periods of
absence.
• Do not leave the machine
switched on unnecessarily.
• Do not submerge the machine
in water.
• Do not put the machine or indi-
vidual parts in the dishwasher.
Otherwise, claims under the
guarantee will not be accepted.
• Unplug immediately if there is
a defect (do not pull the cord
or machine to unplug).
• Liability for damages cannot be
accepted if the machine is incor-
rectly operated, subject to im-
proper use or non-professional
servicing. In such cases, services
will not be provided under the
guarantee.
• Use the coffee grinder for grind-
ing roasted coffee beans only –
do not use with other foods.
Always make sure there is
nothing but coffee beans in the
beans container – otherwise the
guarantee will not apply.
• This machine is not suitable for
individuals (including children)
Downloaded from CoffeeMachineManual.com Manuals

8
with physical, sensory or mental
impairments, including indi-
viduals who do not have suffi-
cient experience or knowledge,
unless they are shown how to
operate the machine or initially
supervised by someone res-
ponsible for their safety.
If repair services are required,
including replacement of the
power cord, please first contact
your dealer or the service-hotline.
Afterwards send the machine to
the dealer from whom it was pur-
chased – or to NIVONA national
customer services.
Caution! Electrical appliances
must be repaired by qualified per-
sonnel! Non-professional repairs
can expose the user to significant
risks. Liability for damages cannot
be accepted if the machine is
used for any other than the in-
tended purpose, incorrectly main-
tained or serviced.
Caution! Using the on/off switch
(fig. 1/E) while the machine is
brewing can cause damage! Only
switch off the appliance when it is
in passive state.
Caution! Risk of scalding!
• Then you produce steam or hot
water, watch out for splashes
from the jet / ‘spumatore’
(fig. 1/R): risk of scalding!
• Only touch the plastic parts of
‘spumatore’ (fig. 1/R) and
never point it at people!
• The steam jet or ‘spumatore’
(fig. 1/R) becomes VERY HOT
during use. Leave to cool for a
few minutes before touching.
CE – This machine conforms to
EC guidelines.
Specifications
Mains voltage: 230 V
Power input: 1400 W
Note: Your fully automatic coffee
centre has a cord storage compart-
ment – if the power cord is too
long, any surplus can be accom-
modated in the storage area on
the rear of the machine (fig. 1/T).
... 1. Safety instructions
Downloaded from CoffeeMachineManual.com Manuals

9
2. Set up
2.1 Preparing the machine
➔ Carefully remove the machine
and all parts from the packaging.
Note: If you need to return your
machine for servicing, it can be
sent by post in the original packag-
ing. Please keep all packaging and
protective material for this pur-
pose.
➔ Remove the water reservoir (fig.
1/C and 2) and wash it out with
clean, cold tap water.
➔ Then fill the reservoir up to the
“max.” mark and replace it in the
machine. Make sure that it clicks
into place.
Note: Only ever fill the reservoir
with fresh, cold water. Do not use
carbonated water or other liquids!
➔ Open the lid of the coffee con-
tainer (fig. 1/A) and fill it with
coffee beans.
Note: Do not use beans which
have been treated with supple-
ments, such as sugar, during or
after the roasting. Supplements
can damage the grinding mecha-
nism and any repair costs arising
as a result are not covered by the
guarantee.
Please make sure the steam / hot
water valve control knob (fig. 1/P
and 5) is turned to ‘0’!
2.2 Getting started
➔ Plug the machine in.
➔ Press the On / Off button (fig.
1/E). In the display light up the
symbols , and one after
another (otherwise, please see
the following Note below).
➔ After a short time the steam /
rinse button ‘S’ (fig. 1/O) light
flashes.
➔ Place a cup under the height-
adjustable coffee spout (fig. 1/I
and 3) and press the steam / rinse
button ‘S’ (fig. 1/O).
➔ The system is then filled with
water and completely rinsed out via
the coffee spout. This operation
must always be carried out when
the machine is started from cold
to preserve the aroma of the cof-
fee. It ensures that no stale water
or coffee left over from previous
brews is used.
➔ All four operating buttons
(fig. 1/F, G, H, O) then light up,
and the selected coffee strength
is shown in the display by the
corresponding number of beans.
Downloaded from CoffeeMachineManual.com Manuals

10
➔ The machine is now operational.
Note: As a protective measure, the
pipes are not filled with water when
the machine is first operated. The
machine indicates this as follows:
➔ When the machine has been
turned on with the On / Off button
(fig. 1/E), Symbol .
➔ Place a cup under the steam /
hot water jet (fig. 1/R).
➔ Turn the steam / hot water valve
control knob (fig. 1/P and 5) to
the right to open the valve. The
system then fills up and some
water may come out of the jet (fig.
1/R).
➔ As soon as the symbol
lights up without flashing and the
filling operation has stopped auto-
matically, you can turn the valve
control knob (fig. 1/P and 5) back
again to close it.
➔ Then follow the steps in ‘2.2
Getting started’.
➔ The machine is now operational.
2.3 Grinder settings
Caution: Grinder settings can only
be adjusted when the grinder is in
operation. You can adjust the grin-
der settings to suit the roast of
your coffee beans. We recommend
that you leave the grinder on a
medium setting.
➔ Slide the regulator on the rear
side (fig. 1/Q) into the desired
position while the grinder is runn-
ing. The smaller the dot, the finer
the coffee is ground. Remember:
· a light roast requires a finer
grind
· a dark roast requires a coarser
grind
Try out the different settings to
find the one that best meets your
personal preferences.
... 2. Set up
Downloaded from CoffeeMachineManual.com Manuals

11
3. Making coffee
Note: The machine is preset for
immediate use. However, we
recommend that first you adjust
the most important settings to suit
your personal needs. Please follow
the instructions in chapter 4
(Programming functions) for filter,
temperature and water hardness
settings.
Note: When the machine is brand
new or has not been used for an
extended period, the first cup of
coffee does not have the full aroma
and should not be drunk.
From model 650 onwards, the ap-
pliance is equipped with automatic
cup lighting for even greater visual
enjoyment. This always lights up
during the whole coffee preparation
process and goes off a few seconds
after the coffee cycle is complete.
3.1 Selecting coffee strength
There are three levels of coffee
strength. They are shown in the
display as follows:
MILD, Symbol uses about 7g
of ground coffee e.g. for cafe latte
or cappuccino
NORMAL, Symbol uses about
9g of ground coffee e.g. for
American coffee
STRONG, Symbol uses about
11g of ground coffee e.g. for
espresso or very strong coffee.
➔ As soon as the machine is
operational, the display shows the
default setting (Symbol ).
➔ You can change this by pressing
coffee strength button (fig. 1/F)
until the desired coffee strength
appears in the display (fig. 1/B).
3.2 Select water quantity
You can freely select the quantity
of water used by turning the water
quantity control knob (fig. 1/D
and 4). The little cup bottom left
represents less water, the large
cup bottom right represents more
water.
Tip: The water quantity can be
adjusted while the machine is
running. Try out various cup sizes
and quantities to find the setting
that best suits your personal
preferences.
3.3 Making one cup
➔ Place your cup under the coffee
spout (fig. 1/I and 3). The coffee
spout is height-adjustable and can
be raised or lowered to suit the
cup size.
Downloaded from CoffeeMachineManual.com Manuals

12
➔ Select the water quantity setting
as described in 3.2.
➔ Press the coffee strength button
(fig. 1/F) until the desired coffee
strength appears.
➔ Press the 1-cup button (fig. 1/G).
➔ The machine now starts the
grinding, pre-brewing and brewing
operation. It can be stopped at
any time by pushing any button.
Caution: The first time you brew
coffee, the grinding chamber is
still empty. The symbol for ‘not
enough beans’ (Symbol ) may
therefore start to flash after the
first grinding and no coffee is pro-
duced. If this occurs, press the
1-cup button (fig. 1/G) a second
time and the operation is repeated.
Tip: To determine the ideal quantity
of water for your taste or cup size,
make your first cup of coffee as
follows:
➔ Turn the water quantity control
knob (fig. 1/D and 4) to one of the
following positions:
· middle for an espresso cup,
· far right for a large cup.
➔ Press the 1-cup button (fig. 1/G).
➔ The machine starts brewing.
➔ Shortly before the desired
amount of coffee is reached, turn
the water quantity control knob
(fig. 1/D and 4) slowly to the left,
until the machine stops brewing.
➔ For future use, note where the
water quantity control knob is now
pointing.
3.4 Making two cups of coffee
In the 2-cup operation, two cups of
coffee are produced consecutively.
➔ Place both cups under the coffee
spout (fig. 1/I and 3).
➔ Select the desired water quantity
and coffee strength settings for
one cup (fig. 1/D and 1/F).
➔Press the 2-cup button (fig. 1/H).
➔ The machine now starts the
grinding, pre-brewing and brewing
operations and produces two con-
secutive cups of coffee.
Tips:
· Brewing can be stopped at any
point by pressing any button.
· If the water or beans supply runs
out or the trays need emptying be-
tween brewing the first cup and
the second, the appropriate symbol
will appear in the display (Symbol
, or ) and the second
coffee will no longer be made.
... 3. Making coffee
Downloaded from CoffeeMachineManual.com Manuals

13
Follow the display screen and then
press the 1-cup button (fig. 1/G)
for the second cup.
3.5 Using pre-ground coffee
➔ First turn the water quantity
control knob (fig. 1/D and 4) to
the desired level for 1-cup.
➔ Open the lid of the pre-ground
coffee chamber (fig. 1/M and 7).
Symbol flashes.
➔ Add a level measuring spoon of
ground coffee and close the lid
again (Symbol and the 1-cup
button lit up).
➔ Place a cup under the coffee
spout (fig. 1/I and 3) and press
the 1-cup button (fig. 1/G). A cup
of coffee is now brewed without
grinding.
Note: If the pre-ground coffee
chamber is left open by accident
or no button is pressed after
coffee is added, the machine will
automatically ask to be rinsed out
a minute after the lid is closed.
Press the flashing rinse button
(fig. 1/O) to confirm, and the
machine will be rinsed out via the
coffee spout. It is then operational
again.
Caution: The pre-ground coffee
chamber is not a storage container.
Never add more than one measure
at a time to the chamber, and use
only fresh grinded or vacuum-
packed coffee ground. Do not use
instant coffee powder.
3.6 Drawing hot water
➔ Hold a cup under the steam / hot
water jet or ‘spumatore’ (fig. 1/R).
➔ Turn the steam / hot water valve
control knob (fig. 1/P and 5) to
the right. Fill the cup up to the
desired level and turn the valve
control knob back to ‘0’.
Caution: Risk of scalding!
Watch out for splashes. The jet
becomes very hot during use.
Leave to cool for a few minutes
before touching, or only touch
the plastic parts.
... 3. Making coffee
Downloaded from CoffeeMachineManual.com Manuals

14
3.7 Drawing steam / frothing milk
3.7.1 Drawing steam
➔ Press the steam warm-up button
(fig. 1/O).
➔ The steam warm-up button (fig.
1/O) flashes for a brief warm-up
period.
➔ As soon as the steam warm-up
button stops flashing (after a
few seconds) and the symbol
flashes, steam can be drawn.
➔ Dip the jet (fig. 1/R) into the
cup / container with the milk to be
frothed. Make sure the control
knob is in the central position.
➔ Now turn the steam / hot water
valve control knob (fig. 1/P and 5)
to the right.
Caution: A little water comes out
before the steam.
➔ The steam warm-up button
(fig. 1/O) flashes while you draw
steam.
➔ Turn the valve control knob
(fig. 1/P and 5) back to the left,
to the ‘0’ position, to stop drawing
steam.
➔ Press the steam warm-up button
again (fig. 1/O and 5) to switch
the machine back to normal coffee
brewing mode.
3.7.2 Frothing milk, hot milk and
cappuccino
With the special ‘spumatore’ froth-
ing device (fig. 1/R and 10) you
can heat up milk straight from the
carton or bottle and then froth it
into the cup.
➔ Dip the inlet hose (fig. 10/F)
straight into the milk carton or
bottle.
➔ Now place a cup under the
‘spumatore’ jet (fig. 1/R).
➔ Then press the steam warm-up
button (fig. 1/O).
➔ The steam warm-up button (fig.
1/O) flashes for a brief warm-up
period.
➔ As soon as the steam warm-up
button stops flashing (after a
few seconds) and the symbol
flashes, steam can be drawn.
➔ For a cappuccino: turn the spu-
matore control knob (fig. 10a) to
the left so that it points to symbol
‘frothed milk’.
➔ For hot milk, turn the spumatore
control knob (fig. 10a) to the right
so that it points to symbol ‘hot
milk’.
➔ Now turn the steam / hot water
valve control knob (fig. 1/P and 5)
to the right.
... 3. Making coffee
Downloaded from CoffeeMachineManual.com Manuals

15
Caution: A little water comes out
before the steam.
➔ As soon as the desired amount
of milk or hot milk has been
drawn, turn the steam valve con-
trol knob (fig. 1/P and 5) back to
the left into the ‘0’ position.
➔ Press the steam warm-up button
again (fig. 1/O and 5) to switch
the machine back to normal coffee
brewing mode.
➔ Now place the cup with the
frothed or hot milk under the cof-
fee spout (fig. 1/I and 3) and
fill up with coffee by pressing the
button as described above (point
3.3 / 3.4).
Note: Steam can be drawn for about
2 minutes. Then the machine will
automatically switch the operation
off. You can prolong the operation
by turning the control knob back
and forth (fig. 1/P and 5).
Caution: It is hard to remove dried
milk left on the jet after frothing.
Please therefore clean the equip-
ment as soon as it has cooled
down!
➔ To do this, fill a container with
fresh, cold water, and dip the inlet
hose into it.
➔ Place an empty container under
the spumatore / jet (fig. 1/R).
Turn the spumatore control knob
(fig. 10a) to the right so that it
points to symbol ‘hot milk’.
➔ Now draw steam as described
above until only clean water /
steam flows out.
➔ Now the whole ‘spumatore’
mechanism is clean and operational
again.
Cleaning: For optimal cleaning the
‘spumatore’ must from time to
time be dismantled and its parts
rinsed under cold clear water. It is
easy to take apart and reassemble
(fig. 10).
... 3. Making coffee
Downloaded from CoffeeMachineManual.com Manuals

16
The following buttons are used for
programming:
Coffee strength button (fig. 1/F)
1-cup button (fig. 1/G)
2-cup button (fig. 1/H)
Steam warm-up button (fig. 1/O)
4.1 Filter
Inserting filter
You can purchase a special filter
for the water reservoir in specialist
shops (1 filter is included). If you
use this filter correctly, you will
not need to descale your coffee
machine as often. After the filter
was inserted, please adjust the
water hardness setting on level 1
(see chapter 4.2).
➔ Empty the water tank (fig. 1/C
and 2).
➔ Set the insertion and replace-
ment date on the date ring (months)
at the top end of the filter cartridge.
➔ Screw the filter into the bracket
provided in the water reservoir using
the assembly tool on the end of
the measuring spoon (fig. 6).
➔ Fill up the reservoir with fresh
water and put it back in the
machine.
➔ Hold a container under the
steam / hot water jet (fig. 1/R) and
turn the valve control knob (fig.
1/P and 5) to the right to open.
The system will now be rinsed
through. If the machine was in
ECO-mode please repeat opera-
tion. The system will be rinsed
(ca. 0,3 L).
➔ Wait until no more water comes
out of the jet and turn the valve
control knob (fig. 1/P and 5) back
to the left to close.
➔ The system can briefly heat up
and is then operational again.
Note: Make sure to remove the
filter when the expiry date set on
the date ring is reached. Also
make sure to take the filter out
the machine for descaling when
instructed to do so (see 5.3).
Operating without a filter
If you no longer wish to use the
filter, do not forget to adjust the
water hardness settings.
Important: Please note that the
following programs can only be set
if the mashine is switched to ON.
You can program the following
settings:
water hardness, temperature level,
automatic switch off, ECO mode .
4. Programming functions
Downloaded from CoffeeMachineManual.com Manuals

17
4.2 Water hardness
According to the water hardness in
your region, or if you have not
inserted a filter (see chapter 4.1),
sooner or later the machine needs
descaling. So that the system can
indicate accurately when desca-
ling is necessary, you must enter
the correct water hardness set-
tings before first use.
The default setting is level 3.
First, test your water with the test
strips provided:
➔ Dip the strip into the water and
then shake it lightly off.
➔ After about a minute you can
read the result by counting the red
dots on the test strip.
➔ The settings corresponding to
the different levels of hardness are
as follows:
Note: If none of the dots turn red
on the test strip, please set to
level 1.
➔ Switch your machine ON.
➔ Press the steam warm-up button
(fig. 1/O) for about 5 seconds.
➔ The water hardness is indicated
by the number of buttons lit up as
detailed below.
➔Press the steam warm-up button
repeatedly until the buttons which
indicate your level of water hard-
ness light up.
➔ Press the coffee strength button
to confirm.
➔ To confirm your settings, the
buttons which indicate the level
selected flash twice consecutively.
➔ The programming operation is
then complete and the system is
restored to coffee-brewing mode.
... 4. Programming functions
Test strip Hardness level Symbol for setting
1 red dot 1–7° Coffee strength is lit up Level 1
2 red dots 8–14° Coffee strength + 1-cup button are lit up Level 2
3 red dots 15–21° Coffee strength + 1-cup button
+ 2-cup button are lit up Level 3
4 red dots >21° Coffee strength + 1-cup button
+ 2-cup button
+ S/steam button are lit up Level 4
Downloaded from CoffeeMachineManual.com Manuals

Note: If you interrupt your pro-
gramming operation for more than
11/2minutes, your machine goes
automatically back into coffee-
brewing mode.
4.3 Temperature
You can change the coffee temp-
erature as desired (the default
setting is ‘high’):
Normal = Coffee strength button is
lit up
High = Coffee strength button and
1-cup button are lit up
Maximum = coffee strength button
and 1-cup button and 2-cup button
are lit up
➔ Press and hold the 1-cup button
(fig. 1/F) for about 5 seconds.
➔ The buttons which indicate the
current temperature setting light
up as detailed above.
➔ You can change to the other
temperature setting by pressing
the 1-cup button.
Press the coffee strength button to
confirm the desired temperature
setting. The buttons which indicate
the setting flash twice to confirm
the selection.
Note: If you interrupt your pro-
gramming operation for more than
11/2minutes, your machine auto-
matically switches back into coffee-
brewing mode.
4.4 Automatic switch off
This function allows you to pro-
gram the machine to switch OFF
automatically given number of
hours after the last brewing
operation. The following settings
are possible. After:
➔ 1 hour = coffee strength button
is lit up.
➔ 3 hours = coffee strength button
+ 1-cup button are lit up.
➔ 5 hours = coffee strength button
+ 1-cup button + 2-cup button
are lit up.
The default setting is level 1,
‘1 hour’. To change this setting,
follow the instructions below:
➔ Press and hold the 2-cup button
(fig. 1/H) for about 5 seconds.
➔ The buttons which indicate the
current automatic switch off sett-
ings light up.
➔ You can select a different auto-
matic switch off setting by press-
ing the 2-cup button.
Press the coffee strength button to
confirm the desired automatic
switch off setting. The buttons
18
... 4. Programming functions
Downloaded from CoffeeMachineManual.com Manuals

19
which indicate the setting flash
twice to confirm the selection.
Note: If you interrupt the pro-
gramming operation longer than
11/2minutes, the machine will
switch automatically back into the
coffee-brewing mode.
4.5 ECO Mode
Your appliance is equipped with a
modern, programmable power
saving function (ECO Mode). This
is factory-set and means that the
appliance remains on power-saving
ECO Mode with minimal heat out-
put 3 minutes after its last use –
therefore using less electricity. If
the coffee maker is started from
power-saving ECO Mode, this can
take a few seconds longer (heating
time). You can also deactivate the
ECO Mode, so that the appliance
is on full stand-by while switched
on:
You can program the following
settings:
➔ ECO Mode active = 1-cup but-
ton + 2-cup button are lit up
➔ ECO Mode inactive = 1-cup
button is lit up
The default setting is “ECO Mode
active”.
To change this setting, follow the
instructions below:
➔ Press and hold the coffee
strength button (fig. 1/F) for about
5 seconds.
➔ The buttons which indicate the
current settings light up.
➔ You can select setting by press-
ing the steam button.
➔ Press the coffee strength button
to confirm the desired setting.
The buttons which indicate the
setting flash twice to confirm the
selection.
... 4. Programming functions
Downloaded from CoffeeMachineManual.com Manuals

20
5. Maintenance and care
5.1 Changing filter
The filter loses its efficiency and
must be replaced after at most
two months.
➔ To change filter, empty the water
reservoir (fig. 1/C and 2) and
unscrew the old filter from the
bracket in the water reservoir.
It can be discarded with the usual
household rubbish.
➔ Set the insertion and replace-
ment dates on the date ring
(months) at the upper end of the
new filter cartridge.
➔ Screw the new filter into the
bracket provided in the water re-
servoir using the assembly tool on
the end of the measuring spoon
(fig. 6).
➔ Refill the water reservoir with
fresh water and replace it in the
machine.
➔ Hold a container under the
steam / hot water jet (fig. 1/R) and
turn the valve control knob (fig.
1/P and 5) to the right to open.
The system will now be rinsed out.
➔ Wait until no more water comes
out of the jet and then turn the
valve control knob (fig. 1/P and 5)
back to the left to close.
➔ The system can briefly heat up
and is then operational again.
5.2 Cleaning program
When the machine must be cleaned,
Symbol appears in the display.
Note: You can continue to brew
coffee and draw hot water or steam.
However, we recommend that you
carry out the cleaning program
as soon as possible, otherwise
operation may be adversely affect-
ed and the guarantee may be
invalidated.
Caution: Once running, the clean-
ing program must not be inter-
rupted. Symbol flashes during
the whole cleaning operation.
Please follow the instructions in
the exact order given below:
➔ Press and hold the coffee
strenght button and 1-cup button
simultaneously for about 5 seconds.
➔ The machine is rinsed twice
through the coffee spout.
➔ Symbol lights up and Sym-
bol continues to flash.
➔ Remove the drip and used coffee
trays (fig. 1/L) and clean thoroughly.
➔ Replace the drip and used coffee
trays. Symbol now also lights up.
➔ Open the lid of the pre-ground
coffee chamber. Symbol starts
flashing.
Downloaded from CoffeeMachineManual.com Manuals