Nixplay Iris User manual

Nixplay Iris Quick Start Guide
Get to know your frame
A)
Activity Sensor
Turns frame on/off when noise is detected
B)
Speaker
Built in speakers
C)
Light Sensor
Adjusts the screen brightness based on ambient light levels in the room
D)
Reset Button
Resets your frame
Remote Control
E)
Infra-red Transmitter
F)
On / Off
G)
Navigation Menu
H)
Back
I)
Display Playlists (Photos only)
J)
- Transition effects when playing photos
- Volume level when playing music/videos
K)
Select / Play / Pause
L)
Settings
AB C D

Position the frame in either 1) portrait or 2) landscape orientation, bend the power cable to
stand and to support the frame.
1) Connect the frame into the DC connector.
2) Plug the USB into the power adaptor.
3) Plug the power adaptor into the wall socket.
* The USB cable can only be powered from the supplied power adaptor (5V, 2A). It cannot
be plugged into a computer, laptop or tablet device.
1
2
1 32

To control the activity of the frame, point the remote control towards the centre of the
frame.
A welcome message will appear on the screen. Using the remote, press to continue.
Using the remote, select your WiFi network, enter the associated WiFi password and select
Connect.
Welcome
Let’s get started
Welcome
Let’s get started
WiFi Setup
Please select
your WiFi network

1) Once your frame is connected to WiFi, follow the screen display.
2) Visit www.nixplay.com using a desktop, laptop or tablet to create your Nixplay account
or log in.
Nixplay tutorial videos
are available to watch on our Nixplay YouTube channel:
Nixplay YouTube
For full details and support
please refer to:
support.nixplay.com
Visit nixplay.com
using a desktop, laptop
or tablet to create your
Nixplay account or log in
1
2